Age | Commit message (Collapse) | Author |
|
|
|
For x86 we have to copy only mask, handler and flags.
We haven't set SA_RESTORER bit in sa_flags anyway.
This patch fixes multiple test failures on x86.
Also we have to build uClibc with FP for x86 because
without FP NPTL and libgcc code cannot properly unwind
the stack during asynchronous cancellation of system calls.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
|
|
issue with gcc 12
The current definition of __WCHAR_MIN and __WCHAR_MAX are only correct
when wchar_t is an int. This is not the case on ARM/AArch64 where
wchar_t is an unsigned int, or some other architectures where wchar_t
is a long.
The current incorrect definition causes a build issue for example when
building mpd, which uses boost, with gcc 12.x:
In file included from /home/thomas/buildroot/aarch64/host/aarch64-buildroot-linux-uclibc/sysroot/usr/include/boost/integer.hpp:20,
from /home/thomas/buildroot/aarch64/host/aarch64-buildroot-linux-uclibc/sysroot/usr/include/boost/crc.hpp:42,
from ../src/storage/StorageState.cxx:43:
/home/thomas/buildroot/aarch64/host/aarch64-buildroot-linux-uclibc/sysroot/usr/include/boost/integer_traits.hpp:105:69: error: narrowing conversion of ‘-2147483648’ from ‘int’ to ‘wchar_t’ [-Wnarrowing]
105 | public detail::integer_traits_base<wchar_t, WCHAR_MIN, WCHAR_MAX>
| ^
This issue was fixed in glibc in 2013, see bug report
https://sourceware.org/bugzilla/show_bug.cgi?id=15036, and upstream
commit
https://sourceware.org/git/?p=glibc.git;a=commit;h=052aff95782fefe9c63566471063e8b20836bfb8.
Since the i386-specific definition of __WCHAR_MIN and __WCHAR_MAX was
also removed at the same time in glibc, we do the same as part of this
commit.
Reported-by: Clément Ramirez <clement.ramirez@bootlin.com>
With-some-useful-help-from: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
on i386, x86_64, and arm.
This patch adds the generation of rcrt1.o which is used by gcc when compiling with the --static-pie flag.
rcrt1.o differs from crt1.o and Scrt1.o in that it the executable has a dynamic section but no relocations have been performed prior to _start being called.
crt1.o assumes there to be no dynamic relocations, and Scrt1.o has all relocations performed prior to execution by lsdo.
The new reloc_static_pie function handles parsing the dynamic section, and performing the relocations in a architecture agnostic method.
It also sets _dl_load_base which is used when initalizing TLS to ensure loading from the proper location.
This allows for easier porting of static-pie support to additional architectures as only modifications to crt1.S to find the load address are required.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
Since Linux 3.11, O_TMPFILE allows to create unnamed files that can be
linked later on. It is internally defined as (O_TMPFILE | O_DIRECTORY)
to make it fail on old kernels.
Copying definitions from glibc for O_TMPFILE is not enough to support
O_TMPFILE; The open() wrapper also need to pass the mode when the flag
contains O_TMPFILE, otherwise, it will pass mode 000 which will succeed
but yield unexpected results.
openat() is curiously not affected since it passes the mode
unconditionally..
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
|
|
The F_DUPFD_CLOEXEC flag was added in POSIX 2008.09.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
|
|
Rename various spare fields in structs to include a namespace
This should avoid accidental clashes with uses of the __unused symbol
in upstream projects. eg currently it causes a compile error in dhcpcd 8.x
due to their re-use of the __unused symbol as a macro
This follows the style of glibc which does something equivalent
|
|
Similar to glibc commit
https://sourceware.org/git/?p=glibc.git;a=commit;h=6bbfc5c09fc5b5e3d4a0cddbbd4e2e457767dae7
we need to handle Linux kernel change, which removed stat64 family from default syscall set.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Waldemar Brodkorb <wbrodkorb@conet.de>
|
|
The return type of syscall() is long so __syscall_error, which is jumped
to by syscall handlers to stash an error number into errno, must return
long too otherwhise it returs 4294967295L instead of -1L. For example,
syscall for x86_64 is defined in libc/sysdeps/linux/x86_64/syscall.S as
syscall:
movq %rdi, %rax /* Syscall number -> rax. */
movq %rsi, %rdi /* shift arg1 - arg5. */
movq %rdx, %rsi
movq %rcx, %rdx
movq %r8, %r10
movq %r9, %r8
movq 8(%rsp),%r9 /* arg6 is on the stack. */
syscall /* Do the system call. */
cmpq $-4095, %rax /* Check %rax for error. */
jae __syscall_error /* Branch forward if it failed. */
ret /* Return to caller. */
In libc/sysdeps/linux/x86_64/__syscall_error.c, __syscall_error is
defined as
int __syscall_error(void) attribute_hidden;
int __syscall_error(void)
{
register int err_no __asm__ ("%rcx");
__asm__ ("mov %rax, %rcx\n\t"
"neg %rcx");
__set_errno(err_no);
return -1;
}
So __syscall_error returns -1 as a 32-bit int in a 64-bit register, %rax
(0x00000000ffffffff, whose decimal value is decimal 4294967295) and a
test like this always returns false:
if (syscall(number, ...) == -1)
foo();
Fix the error by making __syscall_error return a long, like syscall().
The problem can be circumvented by the caller by coercing the returned
value to int before comparing it to -1:
if ((int) syscall(number, ...) == -1)
foo();
The same problem probably occurs on other 64-bit systems but so far only
x86_64 was tested, so this change must be considered experimental.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
|
|
Sync with GNU C library and consolidate duplicate non
architecture specific defines.
MAP_UNINITIALIZED is only defined to 0x4000000 and used by
the Linux kernel when CONFIG_MMAP_ALLOW_UNINITIALIZED is enabled.
CONFIG_MMAP_ALLOW_UNINITIALIZED is only available for nommu.
See Documentation/nommu-mmap.txt.
|
|
|
|
Sync with GNU C library. Found while trying to compile
linux-rdma to uClibc-ng.
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
|
|
As reported by Bering-uClibc project uClibc-ng for x86
generates a segfault on SMP machines when trying to run ntpd.
A small test case is here: https://gist.github.com/ddrown
Use a similar nop instruction as for x86_64 in the code.
Signed-off-by: KP.Kirchdoerfer <kapeka@bering-uclibc.de>
|
|
Signed-off-by: mirabilos <m@mirbsd.org>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
implementation
Signed-off-by: mirabilos <m@mirbsd.org>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
(still same implementation though)
Signed-off-by: mirabilos <m@mirbsd.org>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
Signed-off-by: mirabilos <m@mirbsd.org>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
Follow GNU C Library from c579f48edba88380635ab98cb612030e3ed8691e
and remove the PID caching. These simplifies the architecture specific
assembly code.
The run of the test suite found no regressions, it even solves
some of the test failures for x86/x86_64/sparc.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
Acked-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
|
|
|
|
Similar to musl libc a single libc has many benefits and solves
some open issues with uClibc-ng.
- no pthread_mutex_* weak symbols exported anymore
- applications no longer failing to link when either
-lrt or -lpthread are missing for dynamic and static linking mode
- smaller C library
- slightly better runtime performance
|
|
A single test with targeting ARM showed that this feature
seems bit rotted. Remove DOMULTI and simplify Makefiles.
|
|
|
|
As this is only implemented for a few architecture and not well
tested, just remove it.
|
|
As this is only implemented for a few architecture and not well
tested, just remove it.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Patch from OpenWrt.
Reported-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Only alpha, hppa and sparc need non-default value.
|
|
.globl can be used for every architecture so remove the define.
Sync with GNU C library.
|
|
It's even no longer required for non-ported ppc64
architecture. Sync with GNU C library.
This simplify the macros in include/libc-symbols.h.
|
|
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
* Add a common ret_ERRVAL definition
* Remove ret_ERRVAL from architectures using the common 'ret'
* Add 'undef' to architectures that need a different return instruction
* Add '#include <common/sysdep.h>' to cris and ia64 that were missing it
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
uclibc is compiled with elf/dwarf and secondly HAVE_CPP_ASM_DEBUGINFO
is not defined so we generate bogus .stab sections needlessly
Some of post processing tools get confused when they see both
dwarf and stab sections
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The reason truncate64 takes 4 args on some arches is that their ABI
requires 64bit values to be aligned on register pair boundaries.
Since this alignment affects more than just truncate64, rename the
define to properly document its purpose. This also allows us to
expand it to the other impacted syscalls (which will be done in a
follow up commit).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Fixes the following compilation error:
_lfs_64.h: # error Do not include this header in files not built when LFS is disabled
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Add the obsolescent SUSv3 family of user context manipulating functions
for arm, i386, mips, x86_64.
Signed-off-by: Timon ter Braak <timonterbraak@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This drops __signed, __volatile, and __const. Only the latter was
used in the code base, and for uClibc, not consistently. Much of
the code used plain "const" which meant "__const" was useless.
Really, the point of this is to stay in sync with what glibc did.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This matches a similar change made to glibc.
No functional changes here.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Linux 3.4 added __kernel_long_t and __kernel_ulong_t and various
exported header files were updated to use these new types. Add the
definitions for __kernel_long_t and __kernel_ulong_t to the relevant
kernel_types.h headers.
This change was automated with the following scriptlet
git grep --name-only 'typedef.*__kernel_old_dev_t' \
| xargs sed -i '/typedef.*__kernel_old_dev_t/ a\
typedef long\t\t__kernel_long_t;\
typedef unsigned long\t__kernel_ulong_t;'
Whitespace in arm, avr32, hppa, sparc was then manually fixed up.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
--
Here's a cleaned up patch which should get the whitespace right. I'm a
bit iffy about the sparc changes they make sense to me but it's not a
platform I have access to.
I can break this up per arch or per maintainer if requested.
libc/sysdeps/linux/alpha/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/arm/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/avr32/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/bfin/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/c6x/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/cris/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/e1/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/h8300/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/hppa/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/i386/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/ia64/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/m68k/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/microblaze/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/mips/bits/kernel_types.h | 4 ++++
libc/sysdeps/linux/nios2/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/powerpc/bits/kernel_types.h | 4 ++++
libc/sysdeps/linux/sh/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/sh64/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/sparc/bits/kernel_types.h | 4 ++++
libc/sysdeps/linux/v850/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/x86_64/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/xtensa/bits/kernel_types.h | 2 ++
22 files changed, 50 insertions(+)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Allow use of immedate values as the 6th syscall argument. Otherwise we must
store the arg on memory. This gives gcc more options to optimize better.
This also works around an issue with posix_fallocate.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
__vfork is hidden.
__GI_vfork is strong (not weak as it was).
vfork is weak.
e1 can use the generic version.
Note: libc_hidden_def(x) has different meaning in .c and .S files.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Use param.h instead of MIN.
Use stddef.h instead of offsetof.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
_lfs_64.h makes the compile fail, if LFS is not enabled, no need for the guard.
Reorganize to include only the minimal necessary headers.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Makefile.arch: include it only if ADVANCED_REALTIME is defined.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
While there, guard everywhere ioperm and iopl prototypes with __UCLIBC_LINUX_SPECIFIC__
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
relevant only for gcc < 3.3 or non-gcc compiler
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Make sure we use the new jmpbuf-*.h headers
While there, adapt the offset on microblaze and the _JMPBUF_UNWINDS macro on bfin,
it seems, these were changed in the meantime.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|