summaryrefslogtreecommitdiff
path: root/extra/Configs/Config.mipsel
diff options
context:
space:
mode:
Diffstat (limited to 'extra/Configs/Config.mipsel')
-rw-r--r--extra/Configs/Config.mipsel189
1 files changed, 0 insertions, 189 deletions
diff --git a/extra/Configs/Config.mipsel b/extra/Configs/Config.mipsel
deleted file mode 100644
index 0e85cfe80..000000000
--- a/extra/Configs/Config.mipsel
+++ /dev/null
@@ -1,189 +0,0 @@
-# Library Configuration rules for uClibc
-#
-# This file contains rules which are shared between multiple Makefiles. All
-# normal configuration options live in the file named "Config". You probably
-# should not mess with this file unless you know what you are doing...
-#
-# Copyright (C) 2000 by Lineo, inc.
-# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
-#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU Library General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or (at your option) any
-# later version.
-#
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-# details.
-#
-# You should have received a copy of the GNU Library General Public License
-# along with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-# other sundry sources. Files within this library are copyright by their
-# respective copyright holders.
-
-NATIVE_CC = gcc
-
-# If you are running a cross compiler, you may want to set this
-# to something more interesting... Target architecture is determined
-# by asking this compiler what arch it compiles stuff for.
-CROSS = mipsel-linux-
-CC = $(CROSS)gcc
-AR = $(CROSS)ar
-LD = $(CROSS)ld
-STRIPTOOL = $(CROSS)strip
-#STRIPTOOL = /bin/true
-
-# Set the following to `true' to make a debuggable build, and `false' for
-# production builds.
-DODEBUG = false
-
-# Compiler warnings you want to see
-WARNINGS=-Wall
-
-# Note that the kernel source you use to compile with should be the same as the
-# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary
-# compatibility across kernel versions. So don't expect, for example, uClibc
-# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
-# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
-# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
-# work at all. You have been warned.
-KERNEL_SOURCE=/usr/src/linux
-
-# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
-# Set it to `true' otherwise.
-HAS_MMU = true
-
-# Set this to `false' if you don't have/need basic floating point support
-# support in libc (strtod, printf, scanf). Set it to `true' otherwise.
-# If this is not true, then libm will not be built.
-HAS_FLOATING_POINT = true
-
-# Set to `true' if you want the math library to contain the full set
-# of C99 math library features. Costs an extra 35k or so on x86.
-DO_C99_MATH = false
-
-# Set this to `false' if you don't have/need "(unsigned) long long int" support.
-# Set it to `true' otherwise.
-# Affects *printf and *scanf functions.
-# Also omits strto(u)ll, and (u)lltostr from the library if `false'.
-HAS_LONG_LONG = true
-
-# Set this to 'false if you don't need shadow password support.
-HAS_SHADOW = false
-
-# Set this to `false' if you don't have/need locale support; `true' otherwise.
-# Note: Currently only affects the ctype functions. You must also generate
-# a locale file for anything but the C locale. See directory extra/locale for
-# a utility to do so. Also see the following option.
-HAS_LOCALE = false
-
-# Set this to the path of your uClibc locale file directory.
-# Warning! This must be different than the glibc locale directory to avoid
-# name conflicts, as the locale files are entirely different in format!
-LOCALE_DIR = "/usr/share/uClibc-locale/"
-
-# This specifies which malloc implementation is used.
-# "malloc-simple" is very, very small, but is also very, very dumb
-# and does not try to make good use of memory or clean up after itself.
-#
-# "malloc" on the other hand is a bit bigger, but is pretty smart thereby
-# minimizing memory wastage and reusing already allocated memory. This
-# can be lots faster and safer IMHO.
-#
-# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc.
-# It is actually smaller than "malloc", at least on i386. Right now, it
-# only works on i386 (and maybe m68k) because it needs sbrk.
-MALLOC = malloc-simple
-#MALLOC = malloc
-#MALLOC = malloc-930716
-
-# If you want to collect common syscall code into one function, set to this to
-# `true'. Set it to false otherwise.
-# On i386 this saves about than 2.8k over all syscalls.
-# The idea came from the implementation in dietlibc.
-# At present, only affects i386.
-UNIFIED_SYSCALL = false
-
-# If you want large file support (greater then 2 GiB) turn this on.
-# Do not enable this unless your kernel provides large file support.
-DOLFS = false
-
-# Posix regular expression code is really big -- 27k all by itself.
-# If you don't use regular expressions, turn this off and save space.
-# Of course, if you only staticly link, leave this on, since it will
-# only be included in your apps if you use regular expressions.
-INCLUDE_REGEX=true
-
-# If you want to include RPC support, enable this. RPC is almost never used
-# for anything except NFS support, so unless you plan to use NFS, leave this
-# disabled. This is off by default.
-INCLUDE_RPC = false
-
-# If you want to include support for the next version of the Internet
-# Protocol: IP version 6, enable this. This is off by default.
-INCLUDE_IPV6 = false
-
-# If you want to support only Unix 98 PTYs enable this. Some older
-# applications may need this disabled. For most current programs,
-# you can generally leave this true.
-UNIX98PTY_ONLY = true
-
-# Enable this if /dev/pts is on a devpts or devfs file system. Both
-# these filesystems automatically manage permissions on the /dev/pts
-# devices. You may need to mount this fs on /dev/pts for this to work.
-# This is true by default.
-ASSUME_DEVPTS = true
-
-
-# If you want to compile the library as PIC code, turn this on.
-# This is automagically enabled when HAVE_SHARED is true
-DOPIC = false
-
-# Enable support for shared libraries? If this is false, you can
-# ignore all the rest of the options in this file...
-HAVE_SHARED = false
-
-# uClibc has a native shared library loader for some architectures.
-BUILD_UCLIBC_LDSO=false
-
-# If you are using shared libraries, but do not want/have a native
-# uClibc shared library loader, please specify the name of your
-# system's shared library loader here...
-#SYSTEM_LDSO=/lib/ld-linux.so.2
-
-# When using shared libraries, this path is the location where the
-# shared library will be invoked. This value will be compiled into
-# every binary compiled with uClibc.
-#
-# BIG FAT WARNING:
-# If you do not have a shared library loader with the correct name
-# sitting in the directory this points to, your binaries will not run.
-SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib
-
-# DEVEL_PREFIX is the directory into which the uClibc development
-# environment will be installed. The result will look something
-# like the following:
-# DEVEL_PREFIX/
-# bin/ <contains gcc, ld, etc>
-# lib/ <contains all runtime and static libs>
-# include/ <Where all the header files go>
-# This value is used by the 'make install' Makefile target. Since this
-# directory is compiled into the uclibc cross compiler spoofer, you
-# have to recompile if you change this value...
-DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc
-
-# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
-# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by
-# the 'make install' target, and is not compiled into anything. This
-# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
-# want to set this to "/usr" instead.
-SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)/usr
-
-# If you want 'make install' to install everything under a temporary
-# directory, the define PREFIX during the install step,
-# i.e., 'make PREFIX=/var/tmp/uClibc install'.
-#PREFIX = $(TOPDIR)/_install