csky: port to uclibc-ng

Follow the steps to build c-sky uclibc linux system:
1. git clone https://github.com/c-sky/buildroot.git
2. cd buildroot
3. make qemu_csky_ck810_uclibc_defconfig
4. make

Follow the buildroot/board/qemu/csky/readme.txt to run.

This buildroot toolchain is pre-build, But you can rebuild
the c-sky uclibc-ng alone and install it to the buildroot
sysroot manually.

We'll try our best to improve the uclibc-ng continuously.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>

1 files changed, 170 insertions, 0 deletions

diff --git a/libpthread/nptl/sysdeps/csky/tls.h b/libpthread/nptl/sysdeps/csky/tls.h
new file mode 100644
index 000000000..721551c8d
--- /dev/null
+++ b/libpthread/nptl/sysdeps/csky/tls.h
@@ -0,0 +1,170 @@
+#ifndef _TLS_H
+#define _TLS_H 1
+
+#ifndef __ASSEMBLER__
+
+# include <stdbool.h>
+# include <stddef.h>
+# include <stdint.h>
+
+/* Type for the dtv.  */
+typedef union dtv
+{
+  size_t counter;
+  struct
+  {
+    void *val;
+    bool is_static;
+  } pointer;
+} dtv_t;
+
+#ifdef __CSKYABIV2__
+/* define r31 as thread pointer register? */
+# define READ_THREAD_POINTER() \
+    ({ void *__result;                                \
+       __asm__ __volatile__ ("mov %0, r31"	          \
+                             : "=r" (__result));      \
+       __result; })
+#else
+# define READ_THREAD_POINTER() \
+    ({ register unsigned int __result __asm__("a0");                 \
+       __asm__ __volatile__ ("trap 3;"	    \
+                             : "=r" (__result) : : );      \
+       __result; })
+#endif
+
+#else /* __ASSEMBLER__ */
+# include <tcb-offsets.h>
+# ifdef __CSKYABIV2__
+/* define r31 as thread pointer register? */
+# define READ_THREAD_POINTER() \
+       mov r0, r31;
+# else
+# define READ_THREAD_POINTER() \
+       trap 3;
+# endif
+#endif /* __ASSEMBLER__ */
+
+/* We require TLS support in the tools.  */
+#define HAVE_TLS_SUPPORT                1
+#define HAVE_TLS_MODEL_ATTRIBUTE        1
+#define HAVE___THREAD                   1
+
+/* Signal that TLS support is available.  */
+#define USE_TLS	1
+
+# ifndef __ASSEMBLER__
+
+/* Get system call information.  */
+#  include <sysdep.h>
+
+/* The TP points to the start of the thread blocks.  */
+# define TLS_DTV_AT_TP	1
+
+/* Get the thread descriptor definition.  */
+# include <../../descr.h>
+
+typedef struct
+{
+  dtv_t *dtv;
+  void *private;
+} tcbhead_t;
+
+/* This is the size of the initial TCB.  */
+#  define TLS_INIT_TCB_SIZE	     sizeof (tcbhead_t)
+
+/* Alignment requirements for the initial TCB.  */
+#  define TLS_INIT_TCB_ALIGN     16
+
+/* This is the size of the TCB.  */
+#  define TLS_TCB_SIZE		sizeof (tcbhead_t)
+
+/* Alignment requirements for the TCB.  */
+#  define TLS_TCB_ALIGN	    16
+
+/* This is the size we need before TCB.  */
+#  define TLS_PRE_TCB_SIZE	sizeof (struct pthread)
+
+/* The thread pointer (in hardware register $29) points to the end of
+   the TCB + 0x7000, as for PowerPC.  The pthread_descr structure is
+   immediately in front of the TCB.  */
+# define TLS_TCB_OFFSET     0//0x7000
+
+/* Install the dtv pointer.  The pointer passed is to the element with
+   index -1 which contain the length.  */
+#  define INSTALL_DTV(tcbp, dtvp) \
+  (((tcbhead_t *) (tcbp))->dtv = (dtvp) + 1)
+
+/* Install new dtv for current thread.  */
+#  define INSTALL_NEW_DTV(dtv) \
+  (THREAD_DTV() = (dtv))
+
+/* Return dtv of given thread descriptor.  */
+#  define GET_DTV(tcbp) \
+  (((tcbhead_t *) (tcbp))->dtv)
+
+/* Code to initially initialize the thread pointer.  This might need
+   special attention since 'errno' is not yet available and if the
+   operation can cause a failure 'errno' must not be touched.  */
+# define TLS_INIT_TP(tcbp, secondcall) \
+  ({ INTERNAL_SYSCALL_DECL (err);                   \
+     long result_var;                           \
+     result_var = INTERNAL_SYSCALL (set_thread_area, err, 1,        \
+                    (char *) (tcbp) + TLS_TCB_OFFSET);  \
+     INTERNAL_SYSCALL_ERROR_P (result_var, err)             \
+       ? "unknown error" : NULL; })
+
+/* Return the address of the dtv for the current thread.  */
+#  define THREAD_DTV() \
+  (((tcbhead_t *) (READ_THREAD_POINTER () - TLS_TCB_OFFSET))->dtv)
+
+/* Return the thread descriptor for the current thread.  */
+#  undef THREAD_SELF
+#  define THREAD_SELF \
+ ((struct pthread *) (READ_THREAD_POINTER ()                 \
+              - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE))
+
+/* Magic for libthread_db to know how to do THREAD_SELF.  */
+# define DB_THREAD_SELF \
+  CONST_THREAD_AREA (32, sizeof (struct pthread))
+
+/* Access to data in the thread descriptor is easy.  */
+#define THREAD_GETMEM(descr, member) \
+  descr->member
+#define THREAD_GETMEM_NC(descr, member, idx) \
+  descr->member[idx]
+#define THREAD_SETMEM(descr, member, value) \
+  descr->member = (value)
+#define THREAD_SETMEM_NC(descr, member, idx, value) \
+  descr->member[idx] = (value)
+
+/* Initializing the thread pointer will generate a SIGILL if the syscall
+   is not available.  */
+#define TLS_INIT_TP_EXPENSIVE 1
+
+/* Get and set the global scope generation counter in struct pthread.  */
+#define THREAD_GSCOPE_FLAG_UNUSED 0
+#define THREAD_GSCOPE_FLAG_USED   1
+#define THREAD_GSCOPE_FLAG_WAIT   2
+#define THREAD_GSCOPE_RESET_FLAG() \
+  do									     \
+    { int __res								     \
+	= atomic_exchange_rel (&THREAD_SELF->header.gscope_flag,	     \
+			       THREAD_GSCOPE_FLAG_UNUSED);		     \
+      if (__res == THREAD_GSCOPE_FLAG_WAIT)				     \
+	lll_futex_wake (&THREAD_SELF->header.gscope_flag, 1, LLL_PRIVATE);   \
+    }									     \
+  while (0)
+#define THREAD_GSCOPE_SET_FLAG() \
+  do									     \
+    {									     \
+      THREAD_SELF->header.gscope_flag = THREAD_GSCOPE_FLAG_USED;	     \
+      atomic_write_barrier ();						     \
+    }									     \
+  while (0)
+#define THREAD_GSCOPE_WAIT() \
+  GL(dl_wait_lookup_done) ()
+
+#endif /* __ASSEMBLER__ */
+
+#endif	/* tls.h */