From 2fcffe26e815b7125a357c83b59617ab93c16b41 Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Sun, 15 Oct 2017 20:59:34 +0800 Subject: csky: port to uclibc-ng Follow the steps to build c-sky uclibc linux system: 1. git clone https://github.com/c-sky/buildroot.git 2. cd buildroot 3. make qemu_csky_ck810_uclibc_defconfig 4. make Follow the buildroot/board/qemu/csky/readme.txt to run. This buildroot toolchain is pre-build, But you can rebuild the c-sky uclibc-ng alone and install it to the buildroot sysroot manually. We'll try our best to improve the uclibc-ng continuously. Signed-off-by: Guo Ren --- libpthread/nptl/sysdeps/csky/tls.h | 170 +++++++++++++++++++++++++++++++++++++ 1 file changed, 170 insertions(+) create mode 100644 libpthread/nptl/sysdeps/csky/tls.h (limited to 'libpthread/nptl/sysdeps/csky/tls.h') diff --git a/libpthread/nptl/sysdeps/csky/tls.h b/libpthread/nptl/sysdeps/csky/tls.h new file mode 100644 index 000000000..721551c8d --- /dev/null +++ b/libpthread/nptl/sysdeps/csky/tls.h @@ -0,0 +1,170 @@ +#ifndef _TLS_H +#define _TLS_H 1 + +#ifndef __ASSEMBLER__ + +# include +# include +# include + +/* Type for the dtv. */ +typedef union dtv +{ + size_t counter; + struct + { + void *val; + bool is_static; + } pointer; +} dtv_t; + +#ifdef __CSKYABIV2__ +/* define r31 as thread pointer register? */ +# define READ_THREAD_POINTER() \ + ({ void *__result; \ + __asm__ __volatile__ ("mov %0, r31" \ + : "=r" (__result)); \ + __result; }) +#else +# define READ_THREAD_POINTER() \ + ({ register unsigned int __result __asm__("a0"); \ + __asm__ __volatile__ ("trap 3;" \ + : "=r" (__result) : : ); \ + __result; }) +#endif + +#else /* __ASSEMBLER__ */ +# include +# ifdef __CSKYABIV2__ +/* define r31 as thread pointer register? */ +# define READ_THREAD_POINTER() \ + mov r0, r31; +# else +# define READ_THREAD_POINTER() \ + trap 3; +# endif +#endif /* __ASSEMBLER__ */ + +/* We require TLS support in the tools. */ +#define HAVE_TLS_SUPPORT 1 +#define HAVE_TLS_MODEL_ATTRIBUTE 1 +#define HAVE___THREAD 1 + +/* Signal that TLS support is available. */ +#define USE_TLS 1 + +# ifndef __ASSEMBLER__ + +/* Get system call information. */ +# include + +/* The TP points to the start of the thread blocks. */ +# define TLS_DTV_AT_TP 1 + +/* Get the thread descriptor definition. */ +# include <../../descr.h> + +typedef struct +{ + dtv_t *dtv; + void *private; +} tcbhead_t; + +/* This is the size of the initial TCB. */ +# define TLS_INIT_TCB_SIZE sizeof (tcbhead_t) + +/* Alignment requirements for the initial TCB. */ +# define TLS_INIT_TCB_ALIGN 16 + +/* This is the size of the TCB. */ +# define TLS_TCB_SIZE sizeof (tcbhead_t) + +/* Alignment requirements for the TCB. */ +# define TLS_TCB_ALIGN 16 + +/* This is the size we need before TCB. */ +# define TLS_PRE_TCB_SIZE sizeof (struct pthread) + +/* The thread pointer (in hardware register $29) points to the end of + the TCB + 0x7000, as for PowerPC. The pthread_descr structure is + immediately in front of the TCB. */ +# define TLS_TCB_OFFSET 0//0x7000 + +/* Install the dtv pointer. The pointer passed is to the element with + index -1 which contain the length. */ +# define INSTALL_DTV(tcbp, dtvp) \ + (((tcbhead_t *) (tcbp))->dtv = (dtvp) + 1) + +/* Install new dtv for current thread. */ +# define INSTALL_NEW_DTV(dtv) \ + (THREAD_DTV() = (dtv)) + +/* Return dtv of given thread descriptor. */ +# define GET_DTV(tcbp) \ + (((tcbhead_t *) (tcbp))->dtv) + +/* Code to initially initialize the thread pointer. This might need + special attention since 'errno' is not yet available and if the + operation can cause a failure 'errno' must not be touched. */ +# define TLS_INIT_TP(tcbp, secondcall) \ + ({ INTERNAL_SYSCALL_DECL (err); \ + long result_var; \ + result_var = INTERNAL_SYSCALL (set_thread_area, err, 1, \ + (char *) (tcbp) + TLS_TCB_OFFSET); \ + INTERNAL_SYSCALL_ERROR_P (result_var, err) \ + ? "unknown error" : NULL; }) + +/* Return the address of the dtv for the current thread. */ +# define THREAD_DTV() \ + (((tcbhead_t *) (READ_THREAD_POINTER () - TLS_TCB_OFFSET))->dtv) + +/* Return the thread descriptor for the current thread. */ +# undef THREAD_SELF +# define THREAD_SELF \ + ((struct pthread *) (READ_THREAD_POINTER () \ + - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE)) + +/* Magic for libthread_db to know how to do THREAD_SELF. */ +# define DB_THREAD_SELF \ + CONST_THREAD_AREA (32, sizeof (struct pthread)) + +/* Access to data in the thread descriptor is easy. */ +#define THREAD_GETMEM(descr, member) \ + descr->member +#define THREAD_GETMEM_NC(descr, member, idx) \ + descr->member[idx] +#define THREAD_SETMEM(descr, member, value) \ + descr->member = (value) +#define THREAD_SETMEM_NC(descr, member, idx, value) \ + descr->member[idx] = (value) + +/* Initializing the thread pointer will generate a SIGILL if the syscall + is not available. */ +#define TLS_INIT_TP_EXPENSIVE 1 + +/* Get and set the global scope generation counter in struct pthread. */ +#define THREAD_GSCOPE_FLAG_UNUSED 0 +#define THREAD_GSCOPE_FLAG_USED 1 +#define THREAD_GSCOPE_FLAG_WAIT 2 +#define THREAD_GSCOPE_RESET_FLAG() \ + do \ + { int __res \ + = atomic_exchange_rel (&THREAD_SELF->header.gscope_flag, \ + THREAD_GSCOPE_FLAG_UNUSED); \ + if (__res == THREAD_GSCOPE_FLAG_WAIT) \ + lll_futex_wake (&THREAD_SELF->header.gscope_flag, 1, LLL_PRIVATE); \ + } \ + while (0) +#define THREAD_GSCOPE_SET_FLAG() \ + do \ + { \ + THREAD_SELF->header.gscope_flag = THREAD_GSCOPE_FLAG_USED; \ + atomic_write_barrier (); \ + } \ + while (0) +#define THREAD_GSCOPE_WAIT() \ + GL(dl_wait_lookup_done) () + +#endif /* __ASSEMBLER__ */ + +#endif /* tls.h */ -- cgit v1.2.3