diff options
| -rw-r--r-- | target/Config.in | 18 | ||||
| -rw-r--r-- | target/foxboard/Makefile | 1 | ||||
| -rw-r--r-- | target/foxg20/Makefile | 16 | ||||
| -rw-r--r-- | target/foxg20/files/etc/mdev.conf | 10 | ||||
| -rw-r--r-- | target/foxg20/files/etc/network/interfaces | 5 | ||||
| -rw-r--r-- | target/foxg20/kernel.config | 841 | ||||
| -rw-r--r-- | target/foxg20/target.mk | 7 | ||||
| -rwxr-xr-x | target/foxg20/tools/boot_linux | 511 | ||||
| -rw-r--r-- | target/foxg20/tools/e100boot/Makefile | 24 | ||||
| -rw-r--r-- | target/foxg20/tools/mkfimage/Makefile | 4 | ||||
| -rwxr-xr-x | target/foxg20/tools/mkfimage/mkfimage | bin | 0 -> 11901 bytes | |||
| -rw-r--r-- | target/foxg20/tools/mkfimage/mkfimage.c | 72 | ||||
| -rw-r--r-- | target/foxg20/tools/rules.mk | 7 | ||||
| -rw-r--r-- | target/foxg20/uclibc.config | 243 |
14 files changed, 1758 insertions, 1 deletions
diff --git a/target/Config.in b/target/Config.in index 1c6211d83..629846a51 100644 --- a/target/Config.in +++ b/target/Config.in @@ -119,6 +119,9 @@ config ADK_rb433 config ADK_zaurus tristate +config ADK_foxg20 + tristate + config ADK_foxboard tristate @@ -167,6 +170,7 @@ config ADK_TARGET default "qemu-x86" if ADK_x86_qemu default "qemu-x86_64" if ADK_x86_64_qemu default "foxboard" if ADK_foxboard + default "foxg20" if ADK_foxg20 default "native" if ADK_NATIVE default "rb532" if ADK_rb532 default "rb411" if ADK_rb411 @@ -218,6 +222,19 @@ config ADK_LINUX_ALIX Support for Alix and Wrap boards. http://www.pcengines.ch +config ADK_LINUX_ARM_FOXBOARD + bool "Foxboard (FOXG20)" + select ADK_foxg20 + select ADK_EABI + select ADK_KERNEL_NLS + select ADK_PACKAGE_KMOD_USB_CONTROLLER + select ADK_TARGET_WITH_USB + select ADK_TARGET_WITH_WATCHDOG + help + Support for Foxboard target (foxg20). + http://foxg20.acmesystems.it/doku.php + Status: development + config ADK_LINUX_CRIS_FOXBOARD bool "Foxboard (ETRAX LX100)" select ADK_foxboard @@ -815,6 +832,7 @@ config ADK_TARGET_ROOTFS_NFSROOT bool "NFS root" depends on \ ADK_LINUX_CRIS_FOXBOARD || \ + ADK_LINUX_ARM_FOXBOARD || \ ADK_LINUX_X86_ALIX1C || \ ADK_LINUX_X86_ALIX2D || \ ADK_LINUX_X86_ALIX2D13 || \ diff --git a/target/foxboard/Makefile b/target/foxboard/Makefile index 7fdffd8f2..f085a8f64 100644 --- a/target/foxboard/Makefile +++ b/target/foxboard/Makefile @@ -38,6 +38,5 @@ imageinstall: ${BIN_DIR}/${ROOTFSUSERTARBALL} @echo Use sudo ./boot_linux -F -i ${ADK_TARGET}-${FS}-kernel to flash the kernel @echo Do not forget to set network boot jumper, before you start the foxboard @echo ${ROOTFSUSERTARBALL} is your nfs root and can be extracted on your nfs server - @echo 'Do not forget to create device nodes for console,null and tty in your nfsroot' @echo 'Login as user root with password linux123 via ssh or console' endif diff --git a/target/foxg20/Makefile b/target/foxg20/Makefile new file mode 100644 index 000000000..8d302a15a --- /dev/null +++ b/target/foxg20/Makefile @@ -0,0 +1,16 @@ +# This file is part of the OpenADK project. OpenADK is copyrighted +# material, please see the LICENCE file in the top-level directory. + +include $(TOPDIR)/rules.mk +include $(TOPDIR)/mk/kernel.mk +include $(TOPDIR)/mk/modules.mk +include $(TOPDIR)/mk/kernel-build.mk +include $(TOPDIR)/mk/image.mk + +kernel-install: + +ifeq ($(FS),nfsroot) +imageinstall: ${BIN_DIR}/${ROOTFSUSERTARBALL} + @echo + @echo 'Login as user root with password linux123 via ssh or console' +endif diff --git a/target/foxg20/files/etc/mdev.conf b/target/foxg20/files/etc/mdev.conf new file mode 100644 index 000000000..178ba51e8 --- /dev/null +++ b/target/foxg20/files/etc/mdev.conf @@ -0,0 +1,10 @@ +null 0:0 777 +zero 0:0 666 +console 0:0 0600 +u?random 0:0 644 +ptmx 0:0 666 +tty 0:0 666 +ttyS* 0:0 640 +device-mapper 0:0 660 @mkdir /dev/mapper +tun 0:0 660 >net/tun +.* 0:0 644 @/lib/mdev/init diff --git a/target/foxg20/files/etc/network/interfaces b/target/foxg20/files/etc/network/interfaces new file mode 100644 index 000000000..104c1a1b6 --- /dev/null +++ b/target/foxg20/files/etc/network/interfaces @@ -0,0 +1,5 @@ +auto lo +iface lo inet loopback + +auto eth0 +iface eth0 inet dhcp diff --git a/target/foxg20/kernel.config b/target/foxg20/kernel.config new file mode 100644 index 000000000..b99fb3403 --- /dev/null +++ b/target/foxg20/kernel.config @@ -0,0 +1,841 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Mon Feb 1 19:21:16 2010 +# +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_IOMAP=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NO_IOPORT=y +CONFIG_FORCE_MAX_ZONEORDER=6 +CONFIG_CRIS=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# General setup +# +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_ETRAX_CMDLINE="console=ttyS0,115200" +CONFIG_ETRAX_WATCHDOG=y +# CONFIG_ETRAX_WATCHDOG_NICE_DOGGY is not set +CONFIG_ETRAX_FAST_TIMER=y +# CONFIG_ETRAX_KMALLOCED_MODULES is not set +# CONFIG_OOM_REBOOT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 + +# +# Hardware setup +# +# CONFIG_ETRAX100LX is not set +CONFIG_ETRAX100LX_V2=y +# CONFIG_SVINTO_SIM is not set +# CONFIG_ETRAXFS is not set +# CONFIG_CRIS_MACH_ARTPEC3 is not set +# CONFIG_ETRAX_VCS_SIM is not set +CONFIG_ETRAX_ARCH_V10=y +# CONFIG_ETRAX_ARCH_V32 is not set +CONFIG_ETRAX_DRAM_SIZE=16 +CONFIG_ETRAX_MTD_SIZE=0x00800000 +CONFIG_ETRAX_FLASH_BUSWIDTH=2 +CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1 +CONFIG_ETRAX_FLASH1_SIZE=0 +# CONFIG_ETRAX_DEBUG_PORT0 is not set +# CONFIG_ETRAX_DEBUG_PORT1 is not set +# CONFIG_ETRAX_DEBUG_PORT2 is not set +# CONFIG_ETRAX_DEBUG_PORT3 is not set +CONFIG_ETRAX_DEBUG_PORT_NULL=y + +# +# CRIS v10 options +# +CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000 +CONFIG_ETRAX_PA_LEDS=y +# CONFIG_ETRAX_PB_LEDS is not set +# CONFIG_ETRAX_CSP0_LEDS is not set +# CONFIG_ETRAX_NO_LEDS is not set +CONFIG_ETRAX_LED1G=2 +CONFIG_ETRAX_LED1R=2 +CONFIG_ETRAX_LED2G=3 +CONFIG_ETRAX_LED2R=3 +CONFIG_ETRAX_LED3G=2 +CONFIG_ETRAX_LED3R=2 +CONFIG_ETRAX_RESCUE_SER0=y +# CONFIG_ETRAX_RESCUE_SER1 is not set +# CONFIG_ETRAX_RESCUE_SER2 is not set +# CONFIG_ETRAX_RESCUE_SER3 is not set +CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8 +CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4 +CONFIG_ETRAX_SDRAM=y +CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09603737 +CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80608002 +CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1c +CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0 +CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00 +CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0xce +CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0x03 +# CONFIG_ETRAX_SOFT_SHUTDOWN is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Drivers for built-in interfaces +# +CONFIG_ETRAX_ETHERNET=y +CONFIG_ETRAX_SERIAL=y +# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set +# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set +CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=1 +CONFIG_ETRAX_SERIAL_PORT0=y +CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y +# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set +# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set +# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED is not set +CONFIG_ETRAX_SER0_DTR_ON_PA_BIT=-1 +CONFIG_ETRAX_SER0_RI_ON_PA_BIT=-1 +CONFIG_ETRAX_SER0_DSR_ON_PA_BIT=-1 +CONFIG_ETRAX_SER0_CD_ON_PA_BIT=-1 +CONFIG_ETRAX_SER0_DTR_ON_PB_BIT=-1 +CONFIG_ETRAX_SER0_RI_ON_PB_BIT=-1 +CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1 +CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1 +# CONFIG_ETRAX_SERIAL_PORT1 is not set +# CONFIG_ETRAX_SERIAL_PORT2 is not set +# CONFIG_ETRAX_SERIAL_PORT3 is not set +# CONFIG_ETRAX_RS485 is not set +CONFIG_ETRAX_USB_HOST=y +CONFIG_ETRAX_USB_HOST_PORT1=y +CONFIG_ETRAX_USB_HOST_PORT2=y +CONFIG_ETRAX_PTABLE_SECTOR=0 +CONFIG_ETRAX_I2C=y +CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y +CONFIG_ETRAX_I2C_DATA_PORT=0 +CONFIG_ETRAX_I2C_CLK_PORT=1 +# CONFIG_ETRAX_I2C_EEPROM is not set +CONFIG_ETRAX_GPIO=y +CONFIG_ETRAX_PA_BUTTON_BITMASK=02 +CONFIG_ETRAX_PA_CHANGEABLE_DIR=0xFF +CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF +CONFIG_ETRAX_PB_CHANGEABLE_DIR=0xFF +CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF +# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set +CONFIG_ETRAX_AXISFLASHMAP=y +# CONFIG_ETRAX_RTC is not set +# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set +CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y +CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT=y +# CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT is not set +# CONFIG_ETRAX_SERIAL_PORT0_DMA0_OUT is not set +CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN=y +# CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN is not set +# CONFIG_ETRAX_SERIAL_PORT0_DMA1_IN is not set + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_ROOTFS_ROOT_DEV=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +# CONFIG_MTD_BLOCK is not set +CONFIG_MTD_BLOCK_RO=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_MEDIA_SUPPORT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_I2C is not set +# CONFIG_RTC_CLASS is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_AUFS_FS is not set +CONFIG_FILE_LOCKING=y +# CONFIG_FSNOTIFY is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_STAGING is not set + +# +# Kernel hacking +# +# CONFIG_SYSTEM_PROFILER is not set +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_SAMPLES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set + +# +# OCF Configuration +# +# CONFIG_OCF_OCF is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/target/foxg20/target.mk b/target/foxg20/target.mk new file mode 100644 index 000000000..15650b4d3 --- /dev/null +++ b/target/foxg20/target.mk @@ -0,0 +1,7 @@ +ARCH:= arm +CPU_ARCH:= armel +KERNEL_VERSION:= 2.6.32.2 +KERNEL_RELEASE:= 1 +KERNEL_MD5SUM:= 260551284ac224c3a43c4adac7df4879 +TARGET_OPTIMIZATION:= -Os -pipe +TARGET_CFLAGS_ARCH:= -march=armv5te -mtune=arm926ej-s diff --git a/target/foxg20/tools/boot_linux b/target/foxg20/tools/boot_linux new file mode 100755 index 000000000..f7da261e2 --- /dev/null +++ b/target/foxg20/tools/boot_linux @@ -0,0 +1,511 @@ +#!/usr/bin/perl -w + +#***************************************************************************** +#! +#! FILE NAME : boot_linux +#! +#! PARAMETERS : -b <bootimage> the name of the boot image to use +#! -d <device> the interface to use, e.g., eth1 +#! (defaults is eth0) +#! -f save it in flash memory at address 0x10000 +#! -F save it in flash memory at address 0 +#! -h show some help +#! -i <image> name of the image to use (default is fimage) +#! -o <offset> the offset in the flash where the flashing +#! starts +#! -O <offset> the offset in the image file where the +#! flashing starts from +#! -p print the resulting etrax100boot command +#! instead of executing it +#! -s <size> how much to flash (default is the size of +#! the flash minus the offset specified using +#! -o or -f) +#! -S <size> the size of the flash +#! +#! All sizes and offsets above can be specified as decimal +#! numbers, or as hexadecimal numbers by prefixing them with 0x. +#! It is also possible to use the suffixes k and M to specify +#! kilo (1024) or mega (1048576). +#! +#! DESCRIPTION: Extract the start of the image and any registers that should +#! be set from the kimage or fimage file, and then boot it. +#! +#! FUNCTIONS : convert_size +#! extract_hw_settings +#! get_dword +#! calculate_sdram_init +#! sdram_command +#! print_help +#! +#!---------------------------------------------------------------------------- +#! HISTORY +#! +#! $Log: boot_linux,v $ +#! Revision 1.16 2004/11/01 16:32:27 starvik +#! Corrected help text to avoid confusion +#! +#! Revision 1.15 2003/01/29 11:48:57 pkj +#! Calculate a flash size large enough for the given image if the +#! -S option is not specified. +#! +#! Revision 1.14 2002/11/18 14:40:09 pkj +#! Make use of the --loop option to etrax100boot when initialising +#! SDRAM memories. This requires a lot fewer options to be passed +#! to the boot loader. +#! +#! Revision 1.13 2002/08/15 16:29:02 pkj +#! * The -S option now accepts the size in bytes (just like the -s option). +#! For backwards compatibility it still assumes sizes of 16 and less to +#! be specified in MB. +#! * The suffixes k and M can now be used with all sizes and offsets to +#! specify them in kilo or mega. +#! +#! Revision 1.12 2002/08/15 15:27:34 pkj +#! Use $opts{'x'} instead of $opt_x. +#! +#! Revision 1.11 2002/07/04 17:06:39 pkj +#! * No longer specifies a bootfile by default (not needed any longer). +#! * Implemented option -b to specify a bootfile. +#! * Removed references to option -l (it was never implemented). +#! +#! Revision 1.10 2002/06/04 11:50:23 starvik +#! Check if mrs_data is specified in kernelconfig (necessary for MCM) +#! +#! Revision 1.9 2002/01/29 10:38:26 pkj +#! Change illegal to invalid. +#! +#! Revision 1.8 2001/09/13 12:32:10 pkj +#! * Added option -S to specify the size of the flash (in MB), as -s +#! is used to specify how much to flash nowadays. +#! * Made the default size of the flash depend on the size of the image +#! file. If it is bigger than 0x200100 then the flash is assumed to +#! be 4 MB, otherwise it is assumed to be 2 MB. +#! * Added verification of various options. +#! +#! Revision 1.7 2001/09/13 10:25:11 pkj +#! Minor clean-up. +#! +#! Revision 1.6 2001/06/29 10:05:16 pkj +#! Corrected check for SDRAM. +#! +#! Revision 1.5 2001/06/29 09:11:55 pkj +#! Synchronised boot_elinux and boot_linux. +#! +#!---------------------------------------------------------------------------- +#! (C) Copyright 2001, Axis Communications AB, LUND, SWEDEN +#!**************************************************************************** + +#****************** INCLUDE FILES SECTION ************************************ + +use strict; + +use Getopt::Std; +use File::Basename; + +#****************** VARIABLE DECLARATION SECTION ***************************** + +use vars qw($my_name %opts); +use vars qw($text_start $cmd); +use vars qw($image_name $image_size); +use vars qw($offset $source_offset $flash_size $flashing_size); +use vars qw($sdram_timing_address $sdram_config_address); +use vars qw($sdram_precharge $sdram_nop $sdram_refresh $sdram_mrs); + +#****************** CONSTANT SECTION ***************************************** + +# Register addresses +$sdram_timing_address = "b0000008"; +$sdram_config_address = "b000000c"; + +# SDRAM commands +$sdram_precharge = 3; +$sdram_nop = 0; +$sdram_refresh = 2; +$sdram_mrs = 1; + +#****************** MAIN PROGRAM SECTION ************************************* + +# The name of this program. +$my_name = basename($0); + +# Get options +getopts('b:d:fFhi:o:O:ps:S:', \%opts); + +&print_help if ($opts{'h'}); + +# Name and existance of the image +$image_name = ($opts{'i'} ? $opts{'i'} : 'fimage'); +die "Could not find the image $image_name!\n" unless (-s $image_name); + +if ($opts{'f'} || $opts{'F'}) +{ + $image_size = -s $image_name; + + $offset = ($opts{'f'} ? 0x10000 : 0); + + $offset = &convert_size($opts{'o'}) if (defined($opts{'o'})); + + die("$my_name: Invalid destination offset\n") if ($offset !~ /^\d+$/); + + my $base_name = basename($image_name); + if ($base_name eq 'timage' || $base_name eq 'flash1.img') + { + $source_offset = 0; + } + else + { + $source_offset = $offset; + } + + $source_offset = &convert_size($opts{'O'}) if (defined($opts{'O'})); + + die("$my_name: Invalid source offset\n") if ($source_offset !~ /^\d+$/); + die("$my_name: Source offset > image size\n") if ($source_offset > $image_size); + + if (defined($opts{'S'})) + { + # Backwards compatibility to allow specifying the flash size in MB + # without using an M suffix + $opts{'S'} .= 'M' if ($opts{'S'} =~ /^\d+$/ && $opts{'S'} <= 16); + + $flash_size = &convert_size($opts{'S'}); + } + else + { + # Calculate a flash size large enough for the image without the checksum + # and HWID. + $flash_size = ($image_size - $source_offset + $offset) & 0xFFFF0000; + } + + die("$my_name: Invalid flash size\n") if ($flash_size !~ /^\d+$/); + die("$my_name: Destination offset > flash size\n") if ($offset > $flash_size); + if (defined($opts{'s'})) + { + $flashing_size = &convert_size($opts{'s'}); + } + else + { + $flashing_size = $flash_size - $offset; + } + + die("$my_name: Invalid size to flash\n") if ($flashing_size !~ /^\d+$/); + + if ($flashing_size > $flash_size - $offset) + { + $flashing_size = $flash_size - $offset; + printf("Warning: Flashing size limited to 0x%lx due to the offset (0x%lx) and flash size (0x%lx).\n", $flashing_size, $offset, $flash_size); + } + + if ($flashing_size > $image_size - $source_offset) + { + $flashing_size = $image_size - $source_offset; + printf("Warning: Flashing size limited to 0x%lx due to the offset (0x%lx) and image size (0x%lx).\n", $flashing_size, $source_offset, $image_size); + } +} + +# Create the command line to boot the image +if (system('./etrax100boot --help > /dev/null') == 0) +{ + $cmd = './etrax100boot'; +} +elsif (system('svinto_boot --help > /dev/null') == 0) +{ + $cmd = 'svinto_boot'; +} +else +{ + die("Cannot find e100boot program in your PATH!\n"); +} + +$cmd .= " --device $opts{'d'}" if ($opts{'d'}); + +$cmd .= &extract_hw_settings; + +$cmd .= " --bootfile $opts{'b'}" if ($opts{'b'}); +$cmd .= " --file $image_name $text_start"; + +if ($opts{'f'} || $opts{'F'}) +{ + $cmd .= sprintf(" --flash %lx %lx %lx --jump 0", + hex($text_start) + $source_offset, $offset, $flashing_size); +} +else +{ + $cmd .= " --jump $text_start"; +} + +if ($opts{'p'}) +{ + print "Command:\n$cmd\n"; +} +else +{ + system($cmd); +} + +exit 0; + +#****************** FUNCTION DEFINITION SECTION ****************************** + +#***************************************************************************** +## +## FUNCTION NAME: convert_size +## +##**************************************************************************** + +sub convert_size +{ + my($arg) = @_; + my $size; + + if ($arg =~ /^0x([\da-fA-F]+)([kM])?$/) + { + $size = hex($1); + } + elsif ($arg =~ /^(\d+)([kM])?$/) + { + $size = $1; + } + else + { + return -1; + } + + if (!defined($2)) + { + return $size; + } + elsif ($2 eq 'k') + { + return $size * 1024; + } + elsif ($2 eq 'M') + { + return $size * 1048576; + } +} + +#***************************************************************************** +## +## FUNCTION NAME: extract_hw_settings +## +##**************************************************************************** + +sub extract_hw_settings +{ + my $data; + my $dbg_port; + my $sdram_enabled; + my $return_value = ""; + my $sdram_config; + + # The hw information table has the following format + # + # "HW_PARAM_MAGIC" + # text_start (dword) + # serial debg port (dword) + # sdram enabled (dword) + # register address (dword) + # register value (dword) + # ... + # 0 + + open(FILE, "$image_name") || die("Could not open '$image_name'"); + + while (<FILE>) + { + if (m/HW_PARAM_MAGIC/g) + { + # Seek to first byte after magic + seek(FILE, -length($_) + pos($_), 1); + last; + } + } + + $text_start = &get_dword; + $dbg_port = &get_dword; + $sdram_enabled = int(&get_dword); + + while (1) + { + my $register = &get_dword; + my $value = &get_dword; + + last if ($register eq "00000000"); + + if ($sdram_enabled) + { + if ($register eq $sdram_config_address) + { + $sdram_config = $value; + } + elsif ($register eq $sdram_timing_address) + { + $return_value .= &calculate_sdram_init($value, $sdram_config); + next; + } + } + + $return_value .= " --setreg $register $value"; + } + + close(FILE); + + return $return_value; +} + +#***************************************************************************** +## +## FUNCTION NAME: get_dword +## +##**************************************************************************** + +sub get_dword +{ + my $data; + + read(FILE, $data, 4); + return unpack("H8", pack("V", unpack("N", $data))); +} + +#***************************************************************************** +## +## FUNCTION NAME: calculate_sdram_init +## +##**************************************************************************** + +sub calculate_sdram_init +{ + # Refer to ETRAX 100LX Designers Reference for a description of SDRAM + # initialization + my $sdram_init_val = hex($_[0]); + my $sdram_config_val = hex($_[1]); + my $bus_width = $sdram_config_val & 0x00800000; + my $speed; + my $cas_latency; + my $mrs_data; + my $temp; + my $return_value; + my $value; + + $mrs_data = ($sdram_init_val & 0x00ff0000) >> 16; + $sdram_init_val &= 0x8000ffff; # Make sure mrs data is 0 + $sdram_init_val |= 0x80000000; # Make sure sdram is enabled + $speed = $sdram_init_val & 0x1000; + $cas_latency = $sdram_init_val & 0x3; + if ($speed) # 100 MHz + { + $cas_latency += 2; + } + else # 50 MHz + { + $cas_latency += 1; + } + + # Calculate value of mrs_data + # CAS latency = 2 && bus_width = 32 => 0x40 + # CAS latency = 3 && bus_width = 32 => 0x60 + # CAS latency = 2 && bus_width = 16 => 0x20 + # CAS latency = 3 && bus_width = 16 => 0x30 + if ($mrs_data == 0) + { + if ($bus_width == 0) # 16 bits + { + $mrs_data = $cas_latency == 2 ? 0x20 : 0x30; + } + else # 32 bits + { + $mrs_data = $cas_latency == 2 ? 0x40 : 0x60; + } + } + + $temp = $sdram_init_val | 0x0000c000; # Disable refresh + $return_value .= &sdram_command($temp); + $return_value .= " --pause 20000"; + + $return_value .= &sdram_command($temp, $sdram_precharge); + $return_value .= &sdram_command($temp, $sdram_nop); + + $return_value .= " --setreg +0 7"; + $return_value .= " --label label1"; + $return_value .= &sdram_command($temp, $sdram_refresh); + $return_value .= &sdram_command($temp, $sdram_nop); + $return_value .= " --loop +0 label1"; + + $return_value .= &sdram_command($temp, $sdram_mrs, $mrs_data); + $return_value .= &sdram_command($temp, $sdram_nop); + + $return_value .= &sdram_command($sdram_init_val); + + return $return_value; +} + +#***************************************************************************** +## +## FUNCTION NAME: sdram_command +## +##**************************************************************************** + +sub sdram_command +{ + my($temp, $value, $mrs_data) = @_; + + $value ||= 0; + if ($value == $sdram_mrs) + { + $value = sprintf("%lx", $temp | ($value << 9) | ($mrs_data << 16)); + } + else + { + $value = sprintf("%lx", $temp | ($value << 9)); + } + + return " --setreg $sdram_timing_address $value"; +} + +#***************************************************************************** +## +## FUNCTION NAME: print_help +## +##**************************************************************************** + +sub print_help +{ + print "\nAXIS $my_name, ", '$Revision: 1.16 $ $Date: 2004/11/01 16:32:27 $ ', "\n"; + die <<EOT; +Copyright (C) 2001-2002 Axis Communications AB + +DESCRIPTION: + This program is used to boot (and flash) a linux image to a box. + It tries to extract the required ETRAX 100 settings from the image file. + +SYNTAX: + $my_name [options] + +OPTIONS: + -b <bootfile> : The boot image to use. + -d <device> : The network interface to use, default is eth0. + -f : Save the image in the flash memory starting at + address 0x10000. + -F : Save the image in the flash memory starting at + address 0. + -h : Print this help text. + -i <image> : The path and name of the image to use, default + is fimage. + -o <offset> : The offset in the flash where the flashing starts. + -O <offset> : The offset in the image file where the flashing + starts from. + -p : Print the resulting etrax100boot command instead + of executing it. + -s <size> : How much to flash (default is the size of the + flash minus the offset specified using -o or -f). + -S <size> : The size of the flash. + + All sizes and offsets above can be specified as decimal numbers, or as + hexadecimal numbers by prefixing them with 0x. It is also possible to use + the suffixes k and M to specify kilo (1024) or mega (1048576). + +EOT +} + +#****************** END OF FILE boot_linux *********************************** diff --git a/target/foxg20/tools/e100boot/Makefile b/target/foxg20/tools/e100boot/Makefile new file mode 100644 index 000000000..d807f2349 --- /dev/null +++ b/target/foxg20/tools/e100boot/Makefile @@ -0,0 +1,24 @@ +# This file is part of the OpenADK project. OpenADK is copyrighted +# material, please see the LICENCE file in the top-level directory. + +include $(TOPDIR)/rules.mk + +PKG_NAME:= e100boot +PKG_VERSION:= 0.1 +PKG_RELEASE:= 1 +PKG_MD5SUM:= 11fd53e7824dc550e4cffbc4cd114c3e +PKG_SITES:= http://download.tuxfamily.org/crisos/repository/source/ +DISTFILES:= ${PKG_NAME}.tar.bz2 +WRKDIST= ${WRKDIR}/${PKG_NAME} + +include ../rules.mk + +$(WRKBUILD)/.compiled: ${WRKDIST}/.prepared + $(MAKE) -C $(WRKBUILD) + touch $@ + +$(WRKBUILD)/.installed: $(WRKBUILD)/.compiled + $(INSTALL_BIN) $(WRKBUILD)/sbl/e100boot.stripped $(BIN_DIR)/etrax100boot + touch $@ + +include $(TOPDIR)/mk/tools.mk diff --git a/target/foxg20/tools/mkfimage/Makefile b/target/foxg20/tools/mkfimage/Makefile new file mode 100644 index 000000000..5aae0914f --- /dev/null +++ b/target/foxg20/tools/mkfimage/Makefile @@ -0,0 +1,4 @@ +include $(TOPDIR)/rules.mk + +all: + $(HOSTCC) -o ${STAGING_TOOLS}/bin/mkfimage mkfimage.c diff --git a/target/foxg20/tools/mkfimage/mkfimage b/target/foxg20/tools/mkfimage/mkfimage Binary files differnew file mode 100755 index 000000000..b4f82ee6d --- /dev/null +++ b/target/foxg20/tools/mkfimage/mkfimage diff --git a/target/foxg20/tools/mkfimage/mkfimage.c b/target/foxg20/tools/mkfimage/mkfimage.c new file mode 100644 index 000000000..b1897fbd7 --- /dev/null +++ b/target/foxg20/tools/mkfimage/mkfimage.c @@ -0,0 +1,72 @@ +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> +#include <string.h> +#include <stdlib.h> + +int main(int argc, char **argv){ + unsigned char *buffer = malloc(64 * 1024); + struct stat s; + unsigned int size_vmlinux = 0, real_size_vmlinux = 0; + const unsigned char *magic_str = "ACME_PART_MAGIC"; + unsigned int loop; + unsigned char *magic; + + if(argc != 3){ + printf("%s in out\n", argv[0]); + return 1; + } + + printf("Generating image\n"); + + FILE *vmlinux = fopen(argv[1], "r"); + FILE *vmlinux_out = fopen(argv[2], "w"); + if((!vmlinux) || (!vmlinux_out)){ + printf("Error opening a file\n"); + return 1; + } + + stat(argv[1], &s); + size_vmlinux = s.st_size; + real_size_vmlinux = (size_vmlinux & 0xffff0000) + 0x10000; + + printf("vmlinux = 0x%.08X / 0x%.08X\n", size_vmlinux, real_size_vmlinux); + + unsigned int t = fread(buffer, 1, 64 * 1024, vmlinux); + for(loop = 0; loop < (64 * 1024) - sizeof(magic_str); loop++){ + if(buffer[loop] == magic_str[0]){ + if((magic = strstr(&buffer[loop], magic_str))){ + //printf("Magic at 0x%.08X %p %p\n", magic - buffer, magic, buffer); + printf("Found Magic %X%X%X%X\n", + buffer[loop + strlen(magic_str)], + buffer[loop + strlen(magic_str) + 2], + buffer[loop + strlen(magic_str) + 1], + buffer[loop + strlen(magic_str) + 3]); + + buffer[loop + strlen(magic_str)] = real_size_vmlinux >> 24; + buffer[loop + strlen(magic_str) + 2] = (real_size_vmlinux >> 16) & 0xff; + buffer[loop + strlen(magic_str) + 1] = (real_size_vmlinux >> 8) & 0xff; + buffer[loop + strlen(magic_str) + 3] = (real_size_vmlinux) & 0xff; + + printf("Replaced with %.02X%.02X%.02X%.02X\n", + buffer[loop + strlen(magic_str)], + buffer[loop + strlen(magic_str) + 2], + buffer[loop + strlen(magic_str) + 1], + buffer[loop + strlen(magic_str) + 3]); + + } + } + } + + fwrite(buffer, 1, 64 * 1024, vmlinux_out); + real_size_vmlinux -= 64 * 1024; + do { + real_size_vmlinux -= 64 * 1024; + memset(buffer, 0, 64 * 1024); + fread(buffer, 1, 64 * 1024, vmlinux); + fwrite(buffer, 1, 64 * 1024, vmlinux_out); + } while (real_size_vmlinux); + + return 0; +} diff --git a/target/foxg20/tools/rules.mk b/target/foxg20/tools/rules.mk new file mode 100644 index 000000000..a6a3684ac --- /dev/null +++ b/target/foxg20/tools/rules.mk @@ -0,0 +1,7 @@ +# This file is part of the OpenADK project. OpenADK is copyrighted +# material, please see the LICENCE file in the top-level directory. + +WRKDIR_BASE= ${TOOLS_BUILD_DIR} +WRKDIR= ${WRKDIR_BASE} + +include ${TOPDIR}/mk/buildhlp.mk diff --git a/target/foxg20/uclibc.config b/target/foxg20/uclibc.config new file mode 100644 index 000000000..52ec386f5 --- /dev/null +++ b/target/foxg20/uclibc.config @@ -0,0 +1,243 @@ +# +# Automatically generated make config: don't edit +# Version: 0.9.30.1 +# Tue Sep 8 20:31:31 2009 +# +# TARGET_alpha is not set +TARGET_arm=y +# TARGET_avr32 is not set +# TARGET_bfin is not set +# TARGET_cris is not set +# TARGET_e1 is not set +# TARGET_frv is not set +# TARGET_h8300 is not set +# TARGET_hppa is not set +# TARGET_i386 is not set +# TARGET_i960 is not set +# TARGET_ia64 is not set +# TARGET_m68k is not set +# TARGET_microblaze is not set +# TARGET_mips is not set +# TARGET_nios is not set +# TARGET_nios2 is not set +# TARGET_powerpc is not set +# TARGET_sh is not set +# TARGET_sh64 is not set +# TARGET_sparc is not set +# TARGET_v850 is not set +# TARGET_vax is not set +# TARGET_x86_64 is not set +# TARGET_xtensa is not set + +# +# Target Architecture Features and Options +# +TARGET_ARCH="arm" +FORCE_OPTIONS_FOR_ARCH=y +# CONFIG_ARM_OABI is not set +CONFIG_ARM_EABI=y +CONFIG_GENERIC_ARM=y +# CONFIG_ARM610 is not set +# CONFIG_ARM710 is not set +# CONFIG_ARM7TDMI is not set +# CONFIG_ARM720T is not set +# CONFIG_ARM920T is not set +# CONFIG_ARM922T is not set +# CONFIG_ARM926T is not set +# CONFIG_ARM10T is not set +# CONFIG_ARM1136JF_S is not set +# CONFIG_ARM1176JZ_S is not set +# CONFIG_ARM1176JZF_S is not set +# CONFIG_ARM_CORTEX_M3 is not set +# CONFIG_ARM_CORTEX_M1 is not set +# CONFIG_ARM_SA110 is not set +# CONFIG_ARM_SA1100 is not set +# CONFIG_ARM_XSCALE is not set +# CONFIG_ARM_IWMMXT is not set +TARGET_SUBARCH="" + +# +# Using ELF file format +# +ARCH_ANY_ENDIAN=y +ARCH_LITTLE_ENDIAN=y +# ARCH_WANTS_BIG_ENDIAN is not set +ARCH_WANTS_LITTLE_ENDIAN=y +ARCH_HAS_MMU=y +ARCH_USE_MMU=y +UCLIBC_HAS_FLOATS=y +# UCLIBC_HAS_FPU is not set +UCLIBC_HAS_SOFT_FLOAT=y +DO_C99_MATH=y +UCLIBC_HAS_FENV=y +KERNEL_HEADERS="" +HAVE_DOT_CONFIG=y + +# +# General Library Settings +# +# HAVE_NO_PIC is not set +DOPIC=y +# ARCH_HAS_NO_SHARED is not set +# ARCH_HAS_NO_LDSO is not set +HAVE_SHARED=y +# FORCE_SHAREABLE_TEXT_SEGMENTS is not set +LDSO_LDD_SUPPORT=y +LDSO_CACHE_SUPPORT=y +# LDSO_PRELOAD_FILE_SUPPORT is not set +LDSO_BASE_FILENAME="ld.so" +# UCLIBC_STATIC_LDCONFIG is not set +LDSO_RUNPATH=y +UCLIBC_CTOR_DTOR=y +# LDSO_GNU_HASH_SUPPORT is not set +# HAS_NO_THREADS is not set +UCLIBC_HAS_THREADS=y +PTHREADS_DEBUG_SUPPORT=y +LINUXTHREADS_OLD=y +UCLIBC_HAS_SYSLOG=y +UCLIBC_HAS_LFS=y +# MALLOC is not set +# MALLOC_SIMPLE is not set +MALLOC_STANDARD=y +MALLOC_GLIBC_COMPAT=y +UCLIBC_DYNAMIC_ATEXIT=y +COMPAT_ATEXIT=y +# UCLIBC_SUSV3_LEGACY is not set +# UCLIBC_SUSV3_LEGACY_MACROS is not set +# UCLIBC_HAS_STUBS is not set +UCLIBC_HAS_SHADOW=y +UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y +UCLIBC_HAS___PROGNAME=y +UCLIBC_HAS_PTY=y +ASSUME_DEVPTS=y +UNIX98PTY_ONLY=y +# UCLIBC_HAS_GETPT is not set +UCLIBC_HAS_TM_EXTENSIONS=y +UCLIBC_HAS_TZ_CACHING=y +UCLIBC_HAS_TZ_FILE=y +UCLIBC_HAS_TZ_FILE_READ_MANY=y +UCLIBC_TZ_FILE_PATH="/etc/TZ" + +# +# Advanced Library Settings +# +UCLIBC_PWD_BUFFER_SIZE=256 +UCLIBC_GRP_BUFFER_SIZE=256 + +# +# Support various families of functions +# +# UCLIBC_LINUX_MODULE_24 is not set +UCLIBC_LINUX_SPECIFIC=y +UCLIBC_HAS_GNU_ERROR=y +UCLIBC_BSD_SPECIFIC=y +UCLIBC_HAS_BSD_ERR=y +# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set +# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set +# UCLIBC_NTP_LEGACY is not set +# UCLIBC_SV4_DEPRECATED is not set +UCLIBC_HAS_REALTIME=y +# UCLIBC_HAS_ADVANCED_REALTIME is not set +UCLIBC_HAS_EPOLL=y +UCLIBC_HAS_XATTR=y +# UCLIBC_HAS_PROFILING is not set +UCLIBC_HAS_CRYPT_IMPL=y +UCLIBC_HAS_CRYPT=y +UCLIBC_HAS_NETWORK_SUPPORT=y +UCLIBC_HAS_SOCKET=y +UCLIBC_HAS_IPV4=y +UCLIBC_HAS_IPV6=y +UCLIBC_HAS_RPC=y +UCLIBC_HAS_FULL_RPC=y +UCLIBC_HAS_REENTRANT_RPC=y +UCLIBC_USE_NETLINK=y +UCLIBC_SUPPORT_AI_ADDRCONFIG=y +UCLIBC_HAS_BSD_RES_CLOSE=y + +# +# String and Stdio Support +# +UCLIBC_HAS_STRING_GENERIC_OPT=y +UCLIBC_HAS_STRING_ARCH_OPT=y +UCLIBC_HAS_CTYPE_TABLES=y +UCLIBC_HAS_CTYPE_SIGNED=y +# UCLIBC_HAS_CTYPE_UNSAFE is not set +UCLIBC_HAS_CTYPE_CHECKED=y +# UCLIBC_HAS_CTYPE_ENFORCED is not set +UCLIBC_HAS_WCHAR=y +# UCLIBC_HAS_LOCALE is not set +UCLIBC_HAS_HEXADECIMAL_FLOATS=y +UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y +UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 +UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y +# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set +# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set +UCLIBC_HAS_STDIO_BUFSIZ_4096=y +# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set +UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set +# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set +UCLIBC_HAS_STDIO_GETC_MACRO=y +UCLIBC_HAS_STDIO_PUTC_MACRO=y +UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y +# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set +UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y +UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y +UCLIBC_HAS_PRINTF_M_SPEC=y +UCLIBC_HAS_ERRNO_MESSAGES=y +# UCLIBC_HAS_SYS_ERRLIST is not set +UCLIBC_HAS_SIGNUM_MESSAGES=y +# UCLIBC_HAS_SYS_SIGLIST is not set +UCLIBC_HAS_GNU_GETOPT=y +UCLIBC_HAS_GNU_GETSUBOPT=y + +# +# Big and Tall +# +UCLIBC_HAS_REGEX=y +UCLIBC_HAS_REGEX_OLD=y +UCLIBC_HAS_FNMATCH=y +UCLIBC_HAS_FNMATCH_OLD=y +UCLIBC_HAS_WORDEXP=y +UCLIBC_HAS_FTW=y +UCLIBC_HAS_GLOB=y +UCLIBC_HAS_GNU_GLOB=y + +# +# Library Installation Options +# +SHARED_LIB_LOADER_PREFIX="/lib" +RUNTIME_PREFIX="/" +DEVEL_PREFIX="/usr/" + +# +# Security options +# +# UCLIBC_BUILD_PIE is not set +UCLIBC_HAS_ARC4RANDOM=y +# HAVE_NO_SSP is not set +# UCLIBC_HAS_SSP is not set +UCLIBC_BUILD_RELRO=y +# UCLIBC_BUILD_NOW is not set +UCLIBC_BUILD_NOEXECSTACK=y + +# +# uClibc development/debugging options +# +CROSS_COMPILER_PREFIX="" +UCLIBC_EXTRA_CFLAGS="" +# DODEBUG is not set +# DODEBUG_PT is not set +DOSTRIP=y +# DOASSERTS is not set +# SUPPORT_LD_DEBUG is not set +# SUPPORT_LD_DEBUG_EARLY is not set +# UCLIBC_MALLOC_DEBUGGING is not set +WARNINGS="-Wall" +# EXTRA_WARNINGS is not set +# DOMULTI is not set +# UCLIBC_MJN3_ONLY is not set |