add basic support for foxg20 toolchain

14 files changed, 1758 insertions, 1 deletions

diff --git a/target/Config.in b/target/Config.in
index 1c6211d83..629846a51 100644
--- a/target/Config.in
+++ b/target/Config.in
@@ -119,6 +119,9 @@ config ADK_rb433
 config ADK_zaurus
 	tristate
 
+config ADK_foxg20
+	tristate
+
 config ADK_foxboard
 	tristate
 
@@ -167,6 +170,7 @@ config ADK_TARGET
 	default "qemu-x86"  if ADK_x86_qemu
 	default "qemu-x86_64"  if ADK_x86_64_qemu
 	default "foxboard"  if ADK_foxboard
+	default "foxg20"  if ADK_foxg20
 	default "native"  if ADK_NATIVE
 	default "rb532"  if ADK_rb532
 	default "rb411"  if ADK_rb411
@@ -218,6 +222,19 @@ config ADK_LINUX_ALIX
 	  Support for Alix and Wrap boards.
 	  http://www.pcengines.ch
 
+config ADK_LINUX_ARM_FOXBOARD
+	bool "Foxboard (FOXG20)"
+	select ADK_foxg20
+	select ADK_EABI
+	select ADK_KERNEL_NLS
+	select ADK_PACKAGE_KMOD_USB_CONTROLLER
+	select ADK_TARGET_WITH_USB
+	select ADK_TARGET_WITH_WATCHDOG
+	help
+	  Support for Foxboard target (foxg20).
+	  http://foxg20.acmesystems.it/doku.php
+	  Status: development
+
 config ADK_LINUX_CRIS_FOXBOARD
 	bool "Foxboard (ETRAX LX100)"
 	select ADK_foxboard
@@ -815,6 +832,7 @@ config ADK_TARGET_ROOTFS_NFSROOT
 	bool "NFS root"
 	depends on \
 		ADK_LINUX_CRIS_FOXBOARD || \
+		ADK_LINUX_ARM_FOXBOARD || \
 		ADK_LINUX_X86_ALIX1C || \
 		ADK_LINUX_X86_ALIX2D || \
 		ADK_LINUX_X86_ALIX2D13 || \
diff --git a/target/foxboard/Makefile b/target/foxboard/Makefile
index 7fdffd8f2..f085a8f64 100644
--- a/target/foxboard/Makefile
+++ b/target/foxboard/Makefile
@@ -38,6 +38,5 @@ imageinstall: ${BIN_DIR}/${ROOTFSUSERTARBALL}
 	@echo Use sudo ./boot_linux -F -i ${ADK_TARGET}-${FS}-kernel to flash the kernel
 	@echo Do not forget to set network boot jumper, before you start the foxboard
 	@echo ${ROOTFSUSERTARBALL} is your nfs root and can be extracted on your nfs server
-	@echo 'Do not forget to create device nodes for console,null and tty in your nfsroot'
 	@echo 'Login as user root with password linux123 via ssh or console'
 endif
diff --git a/target/foxg20/Makefile b/target/foxg20/Makefile
new file mode 100644
index 000000000..8d302a15a
--- /dev/null
+++ b/target/foxg20/Makefile
@@ -0,0 +1,16 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+include $(TOPDIR)/mk/kernel.mk
+include $(TOPDIR)/mk/modules.mk
+include $(TOPDIR)/mk/kernel-build.mk
+include $(TOPDIR)/mk/image.mk
+
+kernel-install: 
+
+ifeq ($(FS),nfsroot)
+imageinstall: ${BIN_DIR}/${ROOTFSUSERTARBALL}
+	@echo 
+	@echo 'Login as user root with password linux123 via ssh or console'
+endif
diff --git a/target/foxg20/files/etc/mdev.conf b/target/foxg20/files/etc/mdev.conf
new file mode 100644
index 000000000..178ba51e8
--- /dev/null
+++ b/target/foxg20/files/etc/mdev.conf
@@ -0,0 +1,10 @@
+null 0:0 777
+zero 0:0 666
+console 0:0 0600
+u?random 0:0 644
+ptmx 0:0 666
+tty 0:0 666
+ttyS* 0:0 640
+device-mapper 0:0 660 @mkdir /dev/mapper
+tun 0:0 660 >net/tun
+.* 0:0 644 @/lib/mdev/init
diff --git a/target/foxg20/files/etc/network/interfaces b/target/foxg20/files/etc/network/interfaces
new file mode 100644
index 000000000..104c1a1b6
--- /dev/null
+++ b/target/foxg20/files/etc/network/interfaces
@@ -0,0 +1,5 @@
+auto lo
+iface lo inet loopback
+
+auto eth0
+iface eth0 inet dhcp
diff --git a/target/foxg20/kernel.config b/target/foxg20/kernel.config
new file mode 100644
index 000000000..b99fb3403
--- /dev/null
+++ b/target/foxg20/kernel.config
@@ -0,0 +1,841 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Mon Feb  1 19:21:16 2010
+#
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_IOMAP=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NO_IOPORT=y
+CONFIG_FORCE_MAX_ZONEORDER=6
+CONFIG_CRIS=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_ETRAX_CMDLINE="console=ttyS0,115200"
+CONFIG_ETRAX_WATCHDOG=y
+# CONFIG_ETRAX_WATCHDOG_NICE_DOGGY is not set
+CONFIG_ETRAX_FAST_TIMER=y
+# CONFIG_ETRAX_KMALLOCED_MODULES is not set
+# CONFIG_OOM_REBOOT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Hardware setup
+#
+# CONFIG_ETRAX100LX is not set
+CONFIG_ETRAX100LX_V2=y
+# CONFIG_SVINTO_SIM is not set
+# CONFIG_ETRAXFS is not set
+# CONFIG_CRIS_MACH_ARTPEC3 is not set
+# CONFIG_ETRAX_VCS_SIM is not set
+CONFIG_ETRAX_ARCH_V10=y
+# CONFIG_ETRAX_ARCH_V32 is not set
+CONFIG_ETRAX_DRAM_SIZE=16
+CONFIG_ETRAX_MTD_SIZE=0x00800000
+CONFIG_ETRAX_FLASH_BUSWIDTH=2
+CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1
+CONFIG_ETRAX_FLASH1_SIZE=0
+# CONFIG_ETRAX_DEBUG_PORT0 is not set
+# CONFIG_ETRAX_DEBUG_PORT1 is not set
+# CONFIG_ETRAX_DEBUG_PORT2 is not set
+# CONFIG_ETRAX_DEBUG_PORT3 is not set
+CONFIG_ETRAX_DEBUG_PORT_NULL=y
+
+#
+# CRIS v10 options
+#
+CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
+CONFIG_ETRAX_PA_LEDS=y
+# CONFIG_ETRAX_PB_LEDS is not set
+# CONFIG_ETRAX_CSP0_LEDS is not set
+# CONFIG_ETRAX_NO_LEDS is not set
+CONFIG_ETRAX_LED1G=2
+CONFIG_ETRAX_LED1R=2
+CONFIG_ETRAX_LED2G=3
+CONFIG_ETRAX_LED2R=3
+CONFIG_ETRAX_LED3G=2
+CONFIG_ETRAX_LED3R=2
+CONFIG_ETRAX_RESCUE_SER0=y
+# CONFIG_ETRAX_RESCUE_SER1 is not set
+# CONFIG_ETRAX_RESCUE_SER2 is not set
+# CONFIG_ETRAX_RESCUE_SER3 is not set
+CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8
+CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4
+CONFIG_ETRAX_SDRAM=y
+CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09603737
+CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80608002
+CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1c
+CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0
+CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00
+CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0xce
+CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0x03
+# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Drivers for built-in interfaces
+#
+CONFIG_ETRAX_ETHERNET=y
+CONFIG_ETRAX_SERIAL=y
+# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set
+# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set
+CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=1
+CONFIG_ETRAX_SERIAL_PORT0=y
+CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y
+# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set
+# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
+# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED is not set
+CONFIG_ETRAX_SER0_DTR_ON_PA_BIT=-1
+CONFIG_ETRAX_SER0_RI_ON_PA_BIT=-1
+CONFIG_ETRAX_SER0_DSR_ON_PA_BIT=-1
+CONFIG_ETRAX_SER0_CD_ON_PA_BIT=-1
+CONFIG_ETRAX_SER0_DTR_ON_PB_BIT=-1
+CONFIG_ETRAX_SER0_RI_ON_PB_BIT=-1
+CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1
+CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1
+# CONFIG_ETRAX_SERIAL_PORT1 is not set
+# CONFIG_ETRAX_SERIAL_PORT2 is not set
+# CONFIG_ETRAX_SERIAL_PORT3 is not set
+# CONFIG_ETRAX_RS485 is not set
+CONFIG_ETRAX_USB_HOST=y
+CONFIG_ETRAX_USB_HOST_PORT1=y
+CONFIG_ETRAX_USB_HOST_PORT2=y
+CONFIG_ETRAX_PTABLE_SECTOR=0
+CONFIG_ETRAX_I2C=y
+CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
+CONFIG_ETRAX_I2C_DATA_PORT=0
+CONFIG_ETRAX_I2C_CLK_PORT=1
+# CONFIG_ETRAX_I2C_EEPROM is not set
+CONFIG_ETRAX_GPIO=y
+CONFIG_ETRAX_PA_BUTTON_BITMASK=02
+CONFIG_ETRAX_PA_CHANGEABLE_DIR=0xFF
+CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF
+CONFIG_ETRAX_PB_CHANGEABLE_DIR=0xFF
+CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
+# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
+CONFIG_ETRAX_AXISFLASHMAP=y
+# CONFIG_ETRAX_RTC is not set
+# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
+CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
+CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT=y
+# CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT is not set
+# CONFIG_ETRAX_SERIAL_PORT0_DMA0_OUT is not set
+CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN=y
+# CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN is not set
+# CONFIG_ETRAX_SERIAL_PORT0_DMA1_IN is not set
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+CONFIG_MTD_BLOCK_RO=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MEDIA_SUPPORT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_I2C is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_AUFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_STAGING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_SYSTEM_PROFILER is not set
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/target/foxg20/target.mk b/target/foxg20/target.mk
new file mode 100644
index 000000000..15650b4d3
--- /dev/null
+++ b/target/foxg20/target.mk
@@ -0,0 +1,7 @@
+ARCH:=			arm
+CPU_ARCH:=		armel
+KERNEL_VERSION:=	2.6.32.2
+KERNEL_RELEASE:=	1
+KERNEL_MD5SUM:=		260551284ac224c3a43c4adac7df4879
+TARGET_OPTIMIZATION:=	-Os -pipe
+TARGET_CFLAGS_ARCH:=    -march=armv5te -mtune=arm926ej-s
diff --git a/target/foxg20/tools/boot_linux b/target/foxg20/tools/boot_linux
new file mode 100755
index 000000000..f7da261e2
--- /dev/null
+++ b/target/foxg20/tools/boot_linux
@@ -0,0 +1,511 @@
+#!/usr/bin/perl -w
+
+#*****************************************************************************
+#!
+#! FILE NAME  : boot_linux
+#!
+#! PARAMETERS : -b <bootimage>     the name of the boot image to use
+#!              -d <device>        the interface to use, e.g., eth1
+#!                                 (defaults is eth0)
+#!              -f                 save it in flash memory at address 0x10000
+#!              -F                 save it in flash memory at address 0
+#!              -h                 show some help
+#!              -i <image>         name of the image to use (default is fimage)
+#!              -o <offset>        the offset in the flash where the flashing
+#!                                 starts
+#!              -O <offset>        the offset in the image file where the
+#!                                 flashing starts from
+#!              -p                 print the resulting etrax100boot command
+#!                                 instead of executing it
+#!              -s <size>          how much to flash (default is the size of
+#!                                 the flash minus the offset specified using
+#!                                 -o or -f)
+#!              -S <size>          the size of the flash
+#!
+#!              All sizes and offsets above can be specified as decimal
+#!              numbers, or as hexadecimal numbers by prefixing them with 0x.
+#!              It is also possible to use the suffixes k and M to specify
+#!              kilo (1024) or mega (1048576).
+#!
+#! DESCRIPTION: Extract the start of the image and any registers that should
+#!              be set from the kimage or fimage file, and then boot it.
+#!
+#! FUNCTIONS  : convert_size
+#!              extract_hw_settings
+#!              get_dword
+#!              calculate_sdram_init
+#!              sdram_command
+#!              print_help
+#!
+#!----------------------------------------------------------------------------
+#! HISTORY
+#!
+#! $Log: boot_linux,v $
+#! Revision 1.16  2004/11/01 16:32:27  starvik
+#! Corrected help text to avoid confusion
+#!
+#! Revision 1.15  2003/01/29 11:48:57  pkj
+#! Calculate a flash size large enough for the given image if the
+#! -S option is not specified.
+#!
+#! Revision 1.14  2002/11/18 14:40:09  pkj
+#! Make use of the --loop option to etrax100boot when initialising
+#! SDRAM memories. This requires a lot fewer options to be passed
+#! to the boot loader.
+#!
+#! Revision 1.13  2002/08/15 16:29:02  pkj
+#! * The -S option now accepts the size in bytes (just like the -s option).
+#!   For backwards compatibility it still assumes sizes of 16 and less to
+#!   be specified in MB.
+#! * The suffixes k and M can now be used with all sizes and offsets to
+#!   specify them in kilo or mega.
+#!
+#! Revision 1.12  2002/08/15 15:27:34  pkj
+#! Use $opts{'x'} instead of $opt_x.
+#!
+#! Revision 1.11  2002/07/04 17:06:39  pkj
+#! * No longer specifies a bootfile by default (not needed any longer).
+#! * Implemented option -b to specify a bootfile.
+#! * Removed references to option -l (it was never implemented).
+#!
+#! Revision 1.10  2002/06/04 11:50:23  starvik
+#! Check if mrs_data is specified in kernelconfig (necessary for MCM)
+#!
+#! Revision 1.9  2002/01/29 10:38:26  pkj
+#! Change illegal to invalid.
+#!
+#! Revision 1.8  2001/09/13 12:32:10  pkj
+#! * Added option -S to specify the size of the flash (in MB),  as -s
+#!   is used to specify how much to flash nowadays.
+#! * Made the default size of the flash depend on the size of the image
+#!   file. If it is bigger than 0x200100 then the flash is assumed to
+#!   be 4 MB, otherwise it is assumed to be 2 MB.
+#! * Added verification of various options.
+#!
+#! Revision 1.7  2001/09/13 10:25:11  pkj
+#! Minor clean-up.
+#!
+#! Revision 1.6  2001/06/29 10:05:16  pkj
+#! Corrected check for SDRAM.
+#!
+#! Revision 1.5  2001/06/29 09:11:55  pkj
+#! Synchronised boot_elinux and boot_linux.
+#!
+#!----------------------------------------------------------------------------
+#! (C) Copyright 2001, Axis Communications AB, LUND, SWEDEN
+#!****************************************************************************
+
+#****************** INCLUDE FILES SECTION ************************************
+
+use strict;
+
+use Getopt::Std;
+use File::Basename;
+
+#****************** VARIABLE DECLARATION SECTION *****************************
+
+use vars qw($my_name %opts);
+use vars qw($text_start $cmd);
+use vars qw($image_name $image_size);
+use vars qw($offset $source_offset $flash_size $flashing_size);
+use vars qw($sdram_timing_address $sdram_config_address);
+use vars qw($sdram_precharge $sdram_nop $sdram_refresh $sdram_mrs);
+
+#****************** CONSTANT SECTION *****************************************
+
+# Register addresses
+$sdram_timing_address = "b0000008";
+$sdram_config_address = "b000000c";
+
+# SDRAM commands
+$sdram_precharge = 3;
+$sdram_nop = 0;
+$sdram_refresh = 2;
+$sdram_mrs = 1;
+
+#****************** MAIN PROGRAM SECTION *************************************
+
+# The name of this program.
+$my_name = basename($0);
+
+# Get options
+getopts('b:d:fFhi:o:O:ps:S:', \%opts);
+
+&print_help if ($opts{'h'});
+
+# Name and existance of the image
+$image_name = ($opts{'i'} ? $opts{'i'} : 'fimage');
+die "Could not find the image $image_name!\n" unless (-s $image_name);
+
+if ($opts{'f'} || $opts{'F'})
+{
+  $image_size = -s $image_name;
+
+  $offset = ($opts{'f'} ? 0x10000 : 0);
+
+  $offset = &convert_size($opts{'o'}) if (defined($opts{'o'}));
+
+  die("$my_name: Invalid destination offset\n") if ($offset !~ /^\d+$/);
+
+  my $base_name = basename($image_name);
+  if ($base_name eq 'timage' || $base_name eq 'flash1.img')
+  {
+    $source_offset = 0;
+  }
+  else
+  {
+    $source_offset = $offset;
+  }
+
+  $source_offset = &convert_size($opts{'O'}) if (defined($opts{'O'}));
+
+  die("$my_name: Invalid source offset\n") if ($source_offset !~ /^\d+$/);
+  die("$my_name: Source offset > image size\n") if ($source_offset > $image_size);
+
+  if (defined($opts{'S'}))
+  {
+    # Backwards compatibility to allow specifying the flash size in MB
+    # without using an M suffix
+    $opts{'S'} .= 'M' if ($opts{'S'} =~ /^\d+$/ && $opts{'S'} <= 16);
+
+    $flash_size = &convert_size($opts{'S'});
+  }
+  else
+  {
+    # Calculate a flash size large enough for the image without the checksum
+    # and HWID.
+    $flash_size = ($image_size - $source_offset + $offset) & 0xFFFF0000;
+  }
+
+  die("$my_name: Invalid flash size\n") if ($flash_size !~ /^\d+$/);
+  die("$my_name: Destination offset > flash size\n") if ($offset > $flash_size);
+  if (defined($opts{'s'}))
+  {
+    $flashing_size = &convert_size($opts{'s'});
+  }
+  else
+  {
+    $flashing_size = $flash_size - $offset;
+  }
+
+  die("$my_name: Invalid size to flash\n") if ($flashing_size !~ /^\d+$/);
+
+  if ($flashing_size > $flash_size - $offset)
+  {
+    $flashing_size = $flash_size - $offset;
+    printf("Warning: Flashing size limited to 0x%lx due to the offset (0x%lx) and flash size (0x%lx).\n", $flashing_size, $offset, $flash_size);
+  }
+
+  if ($flashing_size > $image_size - $source_offset)
+  {
+    $flashing_size = $image_size - $source_offset;
+    printf("Warning: Flashing size limited to 0x%lx due to the offset (0x%lx) and image size (0x%lx).\n", $flashing_size, $source_offset, $image_size);
+  }
+}
+
+# Create the command line to boot the image
+if (system('./etrax100boot --help > /dev/null') == 0)
+{
+  $cmd = './etrax100boot';
+}
+elsif (system('svinto_boot --help > /dev/null') == 0)
+{
+  $cmd = 'svinto_boot';
+}
+else
+{
+  die("Cannot find e100boot program in your PATH!\n");
+}
+
+$cmd .= " --device $opts{'d'}" if ($opts{'d'});
+
+$cmd .= &extract_hw_settings;
+
+$cmd .= " --bootfile $opts{'b'}" if ($opts{'b'});
+$cmd .= " --file $image_name $text_start";
+
+if ($opts{'f'} || $opts{'F'})
+{
+  $cmd .= sprintf(" --flash %lx %lx %lx --jump 0",
+		  hex($text_start) + $source_offset, $offset, $flashing_size);
+}
+else
+{
+  $cmd .= " --jump $text_start";
+}
+
+if ($opts{'p'})
+{
+  print "Command:\n$cmd\n";
+}
+else
+{
+  system($cmd);
+}
+
+exit 0;
+
+#****************** FUNCTION DEFINITION SECTION ******************************
+
+#*****************************************************************************
+##
+## FUNCTION NAME: convert_size
+##
+##****************************************************************************
+
+sub convert_size
+{
+  my($arg) = @_;
+  my $size;
+
+  if ($arg =~ /^0x([\da-fA-F]+)([kM])?$/)
+  {
+    $size = hex($1);
+  }
+  elsif ($arg =~ /^(\d+)([kM])?$/)
+  {
+    $size = $1;
+  }
+  else
+  {
+    return -1;
+  }
+
+  if (!defined($2))
+  {
+    return $size;
+  }
+  elsif ($2 eq 'k')
+  {
+    return $size * 1024;
+  }
+  elsif ($2 eq 'M')
+  {
+    return $size * 1048576;
+  }
+}
+
+#*****************************************************************************
+##
+## FUNCTION NAME: extract_hw_settings
+##
+##****************************************************************************
+
+sub extract_hw_settings
+{
+  my $data;
+  my $dbg_port;
+  my $sdram_enabled;
+  my $return_value = "";
+  my $sdram_config;
+
+  # The hw information table has the following format
+  #
+  # "HW_PARAM_MAGIC"
+  # text_start (dword)
+  # serial debg port (dword)
+  # sdram enabled (dword)
+  # register address (dword)
+  # register value (dword)
+  # ...
+  # 0
+
+  open(FILE, "$image_name") || die("Could not open '$image_name'");
+
+  while (<FILE>)
+  {
+    if (m/HW_PARAM_MAGIC/g)
+    {
+      # Seek to first byte after magic
+      seek(FILE, -length($_) + pos($_), 1);
+      last;
+    }
+  }
+
+  $text_start = &get_dword;
+  $dbg_port = &get_dword;
+  $sdram_enabled = int(&get_dword);
+
+  while (1)
+  {
+    my $register = &get_dword;
+    my $value = &get_dword;
+
+    last if ($register eq "00000000");
+
+    if ($sdram_enabled)
+    {
+      if ($register eq $sdram_config_address)
+      {
+	$sdram_config = $value;
+      }
+      elsif ($register eq $sdram_timing_address)
+      {
+	$return_value .= &calculate_sdram_init($value, $sdram_config);
+	next;
+      }
+    }
+
+    $return_value .= " --setreg $register $value";
+  }
+
+  close(FILE);
+
+  return $return_value;
+}
+
+#*****************************************************************************
+##
+## FUNCTION NAME: get_dword
+##
+##****************************************************************************
+
+sub get_dword
+{
+  my $data;
+
+  read(FILE, $data, 4);
+  return unpack("H8", pack("V", unpack("N", $data)));
+}
+
+#*****************************************************************************
+##
+## FUNCTION NAME: calculate_sdram_init
+##
+##****************************************************************************
+
+sub calculate_sdram_init
+{
+  # Refer to ETRAX 100LX Designers Reference for a description of SDRAM
+  # initialization
+  my $sdram_init_val = hex($_[0]);
+  my $sdram_config_val = hex($_[1]);
+  my $bus_width = $sdram_config_val & 0x00800000;
+  my $speed;
+  my $cas_latency;
+  my $mrs_data;
+  my $temp;
+  my $return_value;
+  my $value;
+
+  $mrs_data = ($sdram_init_val & 0x00ff0000) >> 16;
+  $sdram_init_val &= 0x8000ffff; # Make sure mrs data is 0
+  $sdram_init_val |= 0x80000000; # Make sure sdram is enabled
+  $speed = $sdram_init_val & 0x1000;
+  $cas_latency = $sdram_init_val & 0x3;
+  if ($speed) # 100 MHz
+  {
+    $cas_latency += 2;
+  }
+  else # 50 MHz
+  {
+    $cas_latency += 1;
+  }
+
+  # Calculate value of mrs_data
+  # CAS latency = 2 && bus_width = 32 => 0x40
+  # CAS latency = 3 && bus_width = 32 => 0x60
+  # CAS latency = 2 && bus_width = 16 => 0x20
+  # CAS latency = 3 && bus_width = 16 => 0x30
+  if ($mrs_data == 0)
+  {
+    if ($bus_width == 0) # 16 bits
+    {
+      $mrs_data = $cas_latency == 2 ? 0x20 : 0x30;
+    }
+    else # 32 bits
+    {
+      $mrs_data = $cas_latency == 2 ? 0x40 : 0x60;
+    }
+  }
+
+  $temp = $sdram_init_val | 0x0000c000; # Disable refresh
+  $return_value .= &sdram_command($temp);
+  $return_value .= " --pause 20000";
+
+  $return_value .= &sdram_command($temp, $sdram_precharge);
+  $return_value .= &sdram_command($temp, $sdram_nop);
+
+  $return_value .= " --setreg +0 7";
+  $return_value .= " --label label1";
+  $return_value .= &sdram_command($temp, $sdram_refresh);
+  $return_value .= &sdram_command($temp, $sdram_nop);
+  $return_value .= " --loop +0 label1";
+
+  $return_value .= &sdram_command($temp, $sdram_mrs, $mrs_data);
+  $return_value .= &sdram_command($temp, $sdram_nop);
+
+  $return_value .= &sdram_command($sdram_init_val);
+
+  return $return_value;
+}
+
+#*****************************************************************************
+##
+## FUNCTION NAME: sdram_command
+##
+##****************************************************************************
+
+sub sdram_command
+{
+  my($temp, $value, $mrs_data) = @_;
+
+  $value ||= 0;
+  if ($value == $sdram_mrs)
+  {
+    $value = sprintf("%lx", $temp | ($value << 9) | ($mrs_data << 16));
+  }
+  else
+  {
+    $value = sprintf("%lx", $temp | ($value << 9));
+  }
+
+  return " --setreg $sdram_timing_address $value";
+}
+
+#*****************************************************************************
+##
+## FUNCTION NAME: print_help
+##
+##****************************************************************************
+
+sub print_help
+{
+  print "\nAXIS $my_name, ", '$Revision: 1.16 $ $Date: 2004/11/01 16:32:27 $ ', "\n";
+  die <<EOT;
+Copyright (C) 2001-2002 Axis Communications AB
+
+DESCRIPTION:
+  This program is used to boot (and flash) a linux image to a box.
+  It tries to extract the required ETRAX 100 settings from the image file.
+
+SYNTAX:
+  $my_name [options]
+
+OPTIONS:
+  -b <bootfile>           : The boot image to use.
+  -d <device>             : The network interface to use, default is eth0.
+  -f                      : Save the image in the flash memory starting at
+                            address 0x10000.
+  -F                      : Save the image in the flash memory starting at
+                            address 0.
+  -h                      : Print this help text.
+  -i <image>              : The path and name of the image to use, default
+                            is fimage.
+  -o <offset>             : The offset in the flash where the flashing starts.
+  -O <offset>             : The offset in the image file where the flashing
+                            starts from.
+  -p                      : Print the resulting etrax100boot command instead
+                            of executing it.
+  -s <size>               : How much to flash (default is the size of the
+			    flash minus the offset specified using -o or -f).
+  -S <size>               : The size of the flash.
+
+  All sizes and offsets above can be specified as decimal numbers, or as
+  hexadecimal numbers by prefixing them with 0x. It is also possible to use
+  the suffixes k and M to specify kilo (1024) or mega (1048576).
+
+EOT
+}
+
+#****************** END OF FILE boot_linux ***********************************
diff --git a/target/foxg20/tools/e100boot/Makefile b/target/foxg20/tools/e100boot/Makefile
new file mode 100644
index 000000000..d807f2349
--- /dev/null
+++ b/target/foxg20/tools/e100boot/Makefile
@@ -0,0 +1,24 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		e100boot
+PKG_VERSION:=		0.1
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		11fd53e7824dc550e4cffbc4cd114c3e
+PKG_SITES:=		http://download.tuxfamily.org/crisos/repository/source/
+DISTFILES:=		${PKG_NAME}.tar.bz2
+WRKDIST=                ${WRKDIR}/${PKG_NAME}
+
+include ../rules.mk
+
+$(WRKBUILD)/.compiled: ${WRKDIST}/.prepared
+	$(MAKE) -C $(WRKBUILD)
+	touch $@
+
+$(WRKBUILD)/.installed: $(WRKBUILD)/.compiled
+	$(INSTALL_BIN) $(WRKBUILD)/sbl/e100boot.stripped $(BIN_DIR)/etrax100boot
+	touch $@
+
+include $(TOPDIR)/mk/tools.mk
diff --git a/target/foxg20/tools/mkfimage/Makefile b/target/foxg20/tools/mkfimage/Makefile
new file mode 100644
index 000000000..5aae0914f
--- /dev/null
+++ b/target/foxg20/tools/mkfimage/Makefile
@@ -0,0 +1,4 @@
+include $(TOPDIR)/rules.mk
+
+all:
+	$(HOSTCC) -o ${STAGING_TOOLS}/bin/mkfimage mkfimage.c
diff --git a/target/foxg20/tools/mkfimage/mkfimage b/target/foxg20/tools/mkfimage/mkfimage
new file mode 100755
index 000000000..b4f82ee6d
--- /dev/null
+++ b/target/foxg20/tools/mkfimage/mkfimage
diff --git a/target/foxg20/tools/mkfimage/mkfimage.c b/target/foxg20/tools/mkfimage/mkfimage.c
new file mode 100644
index 000000000..b1897fbd7
--- /dev/null
+++ b/target/foxg20/tools/mkfimage/mkfimage.c
@@ -0,0 +1,72 @@
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <string.h>
+#include <stdlib.h>
+
+int main(int argc, char **argv){
+	unsigned char *buffer = malloc(64 * 1024);
+	struct stat s;
+	unsigned int size_vmlinux = 0, real_size_vmlinux = 0;
+	const unsigned char *magic_str = "ACME_PART_MAGIC";
+	unsigned int loop;
+	unsigned char *magic;
+
+	if(argc != 3){
+		printf("%s in out\n", argv[0]);
+		return 1;
+	}
+
+	printf("Generating image\n");
+
+	FILE *vmlinux = fopen(argv[1], "r");
+	FILE *vmlinux_out = fopen(argv[2], "w");
+	if((!vmlinux) || (!vmlinux_out)){
+		printf("Error opening a file\n");
+		return 1;
+	}
+
+	stat(argv[1], &s);
+	size_vmlinux = s.st_size;
+	real_size_vmlinux = (size_vmlinux & 0xffff0000) + 0x10000;
+
+	printf("vmlinux = 0x%.08X / 0x%.08X\n", size_vmlinux, real_size_vmlinux);
+
+	unsigned int t = fread(buffer, 1, 64 * 1024, vmlinux);
+	for(loop = 0; loop < (64 * 1024) - sizeof(magic_str); loop++){
+		if(buffer[loop] == magic_str[0]){
+			if((magic = strstr(&buffer[loop], magic_str))){
+				//printf("Magic at 0x%.08X %p %p\n", magic - buffer, magic, buffer);
+				printf("Found Magic %X%X%X%X\n",
+					buffer[loop + strlen(magic_str)],
+					buffer[loop + strlen(magic_str) + 2],
+					buffer[loop + strlen(magic_str) + 1],
+					buffer[loop + strlen(magic_str) + 3]);
+
+				buffer[loop + strlen(magic_str)] = real_size_vmlinux >> 24;
+				buffer[loop + strlen(magic_str) + 2] = (real_size_vmlinux >> 16) & 0xff;
+				buffer[loop + strlen(magic_str) + 1] = (real_size_vmlinux >> 8) & 0xff;
+				buffer[loop + strlen(magic_str) + 3] = (real_size_vmlinux) & 0xff;
+
+				printf("Replaced with %.02X%.02X%.02X%.02X\n",
+					buffer[loop + strlen(magic_str)],
+					buffer[loop + strlen(magic_str) + 2],
+					buffer[loop + strlen(magic_str) + 1],
+					buffer[loop + strlen(magic_str) + 3]);
+
+			}
+		}
+	}
+
+	fwrite(buffer, 1, 64 * 1024, vmlinux_out);
+	real_size_vmlinux -= 64 * 1024;
+	do {
+		real_size_vmlinux -= 64 * 1024;
+		memset(buffer, 0, 64 * 1024);
+		fread(buffer, 1, 64 * 1024, vmlinux);
+		fwrite(buffer, 1, 64 * 1024, vmlinux_out);
+	} while (real_size_vmlinux);
+
+	return 0;
+}
diff --git a/target/foxg20/tools/rules.mk b/target/foxg20/tools/rules.mk
new file mode 100644
index 000000000..a6a3684ac
--- /dev/null
+++ b/target/foxg20/tools/rules.mk
@@ -0,0 +1,7 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+WRKDIR_BASE=    ${TOOLS_BUILD_DIR}
+WRKDIR=		${WRKDIR_BASE}
+
+include ${TOPDIR}/mk/buildhlp.mk
diff --git a/target/foxg20/uclibc.config b/target/foxg20/uclibc.config
new file mode 100644
index 000000000..52ec386f5
--- /dev/null
+++ b/target/foxg20/uclibc.config
@@ -0,0 +1,243 @@
+#
+# Automatically generated make config: don't edit
+# Version: 0.9.30.1
+# Tue Sep  8 20:31:31 2009
+#
+# TARGET_alpha is not set
+TARGET_arm=y
+# TARGET_avr32 is not set
+# TARGET_bfin is not set
+# TARGET_cris is not set
+# TARGET_e1 is not set
+# TARGET_frv is not set
+# TARGET_h8300 is not set
+# TARGET_hppa is not set
+# TARGET_i386 is not set
+# TARGET_i960 is not set
+# TARGET_ia64 is not set
+# TARGET_m68k is not set
+# TARGET_microblaze is not set
+# TARGET_mips is not set
+# TARGET_nios is not set
+# TARGET_nios2 is not set
+# TARGET_powerpc is not set
+# TARGET_sh is not set
+# TARGET_sh64 is not set
+# TARGET_sparc is not set
+# TARGET_v850 is not set
+# TARGET_vax is not set
+# TARGET_x86_64 is not set
+# TARGET_xtensa is not set
+
+#
+# Target Architecture Features and Options
+#
+TARGET_ARCH="arm"
+FORCE_OPTIONS_FOR_ARCH=y
+# CONFIG_ARM_OABI is not set
+CONFIG_ARM_EABI=y
+CONFIG_GENERIC_ARM=y
+# CONFIG_ARM610 is not set
+# CONFIG_ARM710 is not set
+# CONFIG_ARM7TDMI is not set
+# CONFIG_ARM720T is not set
+# CONFIG_ARM920T is not set
+# CONFIG_ARM922T is not set
+# CONFIG_ARM926T is not set
+# CONFIG_ARM10T is not set
+# CONFIG_ARM1136JF_S is not set
+# CONFIG_ARM1176JZ_S is not set
+# CONFIG_ARM1176JZF_S is not set
+# CONFIG_ARM_CORTEX_M3 is not set
+# CONFIG_ARM_CORTEX_M1 is not set
+# CONFIG_ARM_SA110 is not set
+# CONFIG_ARM_SA1100 is not set
+# CONFIG_ARM_XSCALE is not set
+# CONFIG_ARM_IWMMXT is not set
+TARGET_SUBARCH=""
+
+#
+# Using ELF file format
+#
+ARCH_ANY_ENDIAN=y
+ARCH_LITTLE_ENDIAN=y
+# ARCH_WANTS_BIG_ENDIAN is not set
+ARCH_WANTS_LITTLE_ENDIAN=y
+ARCH_HAS_MMU=y
+ARCH_USE_MMU=y
+UCLIBC_HAS_FLOATS=y
+# UCLIBC_HAS_FPU is not set
+UCLIBC_HAS_SOFT_FLOAT=y
+DO_C99_MATH=y
+UCLIBC_HAS_FENV=y
+KERNEL_HEADERS=""
+HAVE_DOT_CONFIG=y
+
+#
+# General Library Settings
+#
+# HAVE_NO_PIC is not set
+DOPIC=y
+# ARCH_HAS_NO_SHARED is not set
+# ARCH_HAS_NO_LDSO is not set
+HAVE_SHARED=y
+# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
+LDSO_LDD_SUPPORT=y
+LDSO_CACHE_SUPPORT=y
+# LDSO_PRELOAD_FILE_SUPPORT is not set
+LDSO_BASE_FILENAME="ld.so"
+# UCLIBC_STATIC_LDCONFIG is not set
+LDSO_RUNPATH=y
+UCLIBC_CTOR_DTOR=y
+# LDSO_GNU_HASH_SUPPORT is not set
+# HAS_NO_THREADS is not set
+UCLIBC_HAS_THREADS=y
+PTHREADS_DEBUG_SUPPORT=y
+LINUXTHREADS_OLD=y
+UCLIBC_HAS_SYSLOG=y
+UCLIBC_HAS_LFS=y
+# MALLOC is not set
+# MALLOC_SIMPLE is not set
+MALLOC_STANDARD=y
+MALLOC_GLIBC_COMPAT=y
+UCLIBC_DYNAMIC_ATEXIT=y
+COMPAT_ATEXIT=y
+# UCLIBC_SUSV3_LEGACY is not set
+# UCLIBC_SUSV3_LEGACY_MACROS is not set
+# UCLIBC_HAS_STUBS is not set
+UCLIBC_HAS_SHADOW=y
+UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
+UCLIBC_HAS___PROGNAME=y
+UCLIBC_HAS_PTY=y
+ASSUME_DEVPTS=y
+UNIX98PTY_ONLY=y
+# UCLIBC_HAS_GETPT is not set
+UCLIBC_HAS_TM_EXTENSIONS=y
+UCLIBC_HAS_TZ_CACHING=y
+UCLIBC_HAS_TZ_FILE=y
+UCLIBC_HAS_TZ_FILE_READ_MANY=y
+UCLIBC_TZ_FILE_PATH="/etc/TZ"
+
+#
+# Advanced Library Settings
+#
+UCLIBC_PWD_BUFFER_SIZE=256
+UCLIBC_GRP_BUFFER_SIZE=256
+
+#
+# Support various families of functions
+#
+# UCLIBC_LINUX_MODULE_24 is not set
+UCLIBC_LINUX_SPECIFIC=y
+UCLIBC_HAS_GNU_ERROR=y
+UCLIBC_BSD_SPECIFIC=y
+UCLIBC_HAS_BSD_ERR=y
+# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set
+# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set
+# UCLIBC_NTP_LEGACY is not set
+# UCLIBC_SV4_DEPRECATED is not set
+UCLIBC_HAS_REALTIME=y
+# UCLIBC_HAS_ADVANCED_REALTIME is not set
+UCLIBC_HAS_EPOLL=y
+UCLIBC_HAS_XATTR=y
+# UCLIBC_HAS_PROFILING is not set
+UCLIBC_HAS_CRYPT_IMPL=y
+UCLIBC_HAS_CRYPT=y
+UCLIBC_HAS_NETWORK_SUPPORT=y
+UCLIBC_HAS_SOCKET=y
+UCLIBC_HAS_IPV4=y
+UCLIBC_HAS_IPV6=y
+UCLIBC_HAS_RPC=y
+UCLIBC_HAS_FULL_RPC=y
+UCLIBC_HAS_REENTRANT_RPC=y
+UCLIBC_USE_NETLINK=y
+UCLIBC_SUPPORT_AI_ADDRCONFIG=y
+UCLIBC_HAS_BSD_RES_CLOSE=y
+
+#
+# String and Stdio Support
+#
+UCLIBC_HAS_STRING_GENERIC_OPT=y
+UCLIBC_HAS_STRING_ARCH_OPT=y
+UCLIBC_HAS_CTYPE_TABLES=y
+UCLIBC_HAS_CTYPE_SIGNED=y
+# UCLIBC_HAS_CTYPE_UNSAFE is not set
+UCLIBC_HAS_CTYPE_CHECKED=y
+# UCLIBC_HAS_CTYPE_ENFORCED is not set
+UCLIBC_HAS_WCHAR=y
+# UCLIBC_HAS_LOCALE is not set
+UCLIBC_HAS_HEXADECIMAL_FLOATS=y
+UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
+UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
+UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
+# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
+UCLIBC_HAS_STDIO_BUFSIZ_4096=y
+# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
+UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
+UCLIBC_HAS_STDIO_GETC_MACRO=y
+UCLIBC_HAS_STDIO_PUTC_MACRO=y
+UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
+# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
+UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
+UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
+UCLIBC_HAS_PRINTF_M_SPEC=y
+UCLIBC_HAS_ERRNO_MESSAGES=y
+# UCLIBC_HAS_SYS_ERRLIST is not set
+UCLIBC_HAS_SIGNUM_MESSAGES=y
+# UCLIBC_HAS_SYS_SIGLIST is not set
+UCLIBC_HAS_GNU_GETOPT=y
+UCLIBC_HAS_GNU_GETSUBOPT=y
+
+#
+# Big and Tall
+#
+UCLIBC_HAS_REGEX=y
+UCLIBC_HAS_REGEX_OLD=y
+UCLIBC_HAS_FNMATCH=y
+UCLIBC_HAS_FNMATCH_OLD=y
+UCLIBC_HAS_WORDEXP=y
+UCLIBC_HAS_FTW=y
+UCLIBC_HAS_GLOB=y
+UCLIBC_HAS_GNU_GLOB=y
+
+#
+# Library Installation Options
+#
+SHARED_LIB_LOADER_PREFIX="/lib"
+RUNTIME_PREFIX="/"
+DEVEL_PREFIX="/usr/"
+
+#
+# Security options
+#
+# UCLIBC_BUILD_PIE is not set
+UCLIBC_HAS_ARC4RANDOM=y
+# HAVE_NO_SSP is not set
+# UCLIBC_HAS_SSP is not set
+UCLIBC_BUILD_RELRO=y
+# UCLIBC_BUILD_NOW is not set
+UCLIBC_BUILD_NOEXECSTACK=y
+
+#
+# uClibc development/debugging options
+#
+CROSS_COMPILER_PREFIX=""
+UCLIBC_EXTRA_CFLAGS=""
+# DODEBUG is not set
+# DODEBUG_PT is not set
+DOSTRIP=y
+# DOASSERTS is not set
+# SUPPORT_LD_DEBUG is not set
+# SUPPORT_LD_DEBUG_EARLY is not set
+# UCLIBC_MALLOC_DEBUGGING is not set
+WARNINGS="-Wall"
+# EXTRA_WARNINGS is not set
+# DOMULTI is not set
+# UCLIBC_MJN3_ONLY is not set