use bin directory for host binaries only, use new firmware directory for the resulting firmware

1 files changed, 20 insertions, 20 deletions

diff --git a/target/arm/Makefile b/target/arm/Makefile
index 6dc9cd306..080ac4f57 100644
--- a/target/arm/Makefile
+++ b/target/arm/Makefile
@@ -30,15 +30,15 @@ kernel-install:
 		-n foxg20 $(KERNEL) $(MAKE_TRACE)
 
 ifeq ($(ADK_TARGET_FS),nfsroot)
-imageinstall: kernel-install ${BIN_DIR}/${ROOTFSUSERTARBALL}
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+imageinstall: kernel-install ${FW_DIR}/${ROOTFSUSERTARBALL}
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 	@echo 'Type dhcp via u-boot prompt to load kernel'
 	@echo 'After that type bootm to load the kernel'
 endif
 ifeq ($(ADK_TARGET_FS),mmc)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
+imageinstall: kernel-install $(FW_DIR)/$(ROOTFSTARBALL)
 	@echo "The RootFS tarball is:"
-	@echo "$(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "$(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo 'Before booting from MicroSD card you need to set following u-boot environment variable:'
 	@echo "setenv bootcmd 'mmc init; sleep 1; fatload mmc 0 0x22000000 kernel; bootm 0x22000000'"
 	@echo "saveenv"
@@ -48,40 +48,40 @@ imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
 endif
 ifeq ($(ADK_TARGET_FS),archive)
 ifeq ($(ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20),y)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
+imageinstall: kernel-install $(FW_DIR)/$(ROOTFSTARBALL)
 else
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
 endif
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI),y)
 	@echo "Use following command to install it on SD card:"
-	@echo "sudo ./scripts/install-rpi.sh /dev/sdb $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "sudo ./scripts/install-rpi.sh /dev/sdb $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM),y)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following options:"
-	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(BIN_DIR)/$(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(FW_DIR)/$(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif