use bin directory for host binaries only, use new firmware directory for the resulting firmware

12 files changed, 207 insertions, 207 deletions

diff --git a/target/arm/Makefile b/target/arm/Makefile
index 6dc9cd306..080ac4f57 100644
--- a/target/arm/Makefile
+++ b/target/arm/Makefile
@@ -30,15 +30,15 @@ kernel-install:
 		-n foxg20 $(KERNEL) $(MAKE_TRACE)
 
 ifeq ($(ADK_TARGET_FS),nfsroot)
-imageinstall: kernel-install ${BIN_DIR}/${ROOTFSUSERTARBALL}
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+imageinstall: kernel-install ${FW_DIR}/${ROOTFSUSERTARBALL}
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 	@echo 'Type dhcp via u-boot prompt to load kernel'
 	@echo 'After that type bootm to load the kernel'
 endif
 ifeq ($(ADK_TARGET_FS),mmc)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
+imageinstall: kernel-install $(FW_DIR)/$(ROOTFSTARBALL)
 	@echo "The RootFS tarball is:"
-	@echo "$(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "$(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo 'Before booting from MicroSD card you need to set following u-boot environment variable:'
 	@echo "setenv bootcmd 'mmc init; sleep 1; fatload mmc 0 0x22000000 kernel; bootm 0x22000000'"
 	@echo "saveenv"
@@ -48,40 +48,40 @@ imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
 endif
 ifeq ($(ADK_TARGET_FS),archive)
 ifeq ($(ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20),y)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
+imageinstall: kernel-install $(FW_DIR)/$(ROOTFSTARBALL)
 else
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
 endif
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI),y)
 	@echo "Use following command to install it on SD card:"
-	@echo "sudo ./scripts/install-rpi.sh /dev/sdb $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "sudo ./scripts/install-rpi.sh /dev/sdb $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM),y)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following options:"
-	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(BIN_DIR)/$(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(FW_DIR)/$(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
diff --git a/target/m68k/Makefile b/target/m68k/Makefile
index b63b5ab91..193d8f3ed 100644
--- a/target/m68k/Makefile
+++ b/target/m68k/Makefile
@@ -10,33 +10,33 @@ include $(TOPDIR)/mk/image.mk
 KERNEL:=$(LINUX_DIR)/vmlinux
 
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_M68K),y)
 	@echo "Use following command to create a QEMU Image:"
-	@echo "sudo ./scripts/create-image.sh -f ${ADK_TARGET_ROOTFS} qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "sudo ./scripts/create-image.sh -f ${ADK_TARGET_ROOTFS} qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-m68k -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-m68k -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_M68K),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-m68k -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-m68k -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_M68K),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-m68k -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-m68k -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
diff --git a/target/microblaze/Makefile b/target/microblaze/Makefile
index e4c98ed6d..7a411aa95 100644
--- a/target/microblaze/Makefile
+++ b/target/microblaze/Makefile
@@ -25,38 +25,38 @@ endif
 
 ifeq ($(ADK_TARGET_FS),squashfs)
 imageinstall: tools-compile $(BUILD_DIR)/root.squashfs
-	qemu-img create -f raw $(BIN_DIR)/$(ROOTFSSQUASHFS) $(ADK_TARGET_MTD_SIZE)
-	dd conv=notrunc if=$(BUILD_DIR)/root.squashfs of=$(BIN_DIR)/$(ROOTFSSQUASHFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+	qemu-img create -f raw $(FW_DIR)/$(ROOTFSSQUASHFS) $(ADK_TARGET_MTD_SIZE)
+	dd conv=notrunc if=$(BUILD_DIR)/root.squashfs of=$(FW_DIR)/$(ROOTFSSQUASHFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 ifneq ($(ADK_HARDWARE_QEMU),)
 	@echo "Start qemu with following options:"
-	@echo 'qemu-system-${CPU_ARCH} $(DTB) -M $(MODEL) -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -pflash $(BIN_DIR)/$(ROOTFSSQUASHFS)'
+	@echo 'qemu-system-${CPU_ARCH} $(DTB) -M $(MODEL) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -pflash $(FW_DIR)/$(ROOTFSSQUASHFS)'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),jffs2)
-imageinstall: tools-compile $(BIN_DIR)/$(ROOTFSJFFS2)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+imageinstall: tools-compile $(FW_DIR)/$(ROOTFSJFFS2)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 ifneq ($(ADK_HARDWARE_QEMU),)
 	@echo "Start qemu with following options:"
-	@echo 'qemu-system-${CPU_ARCH} $(DTB) -M $(MODEL) -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -pflash $(BIN_DIR)/$(ROOTFSJFFS2)'
+	@echo 'qemu-system-${CPU_ARCH} $(DTB) -M $(MODEL) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -pflash $(FW_DIR)/$(ROOTFSJFFS2)'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifneq ($(ADK_HARDWARE_QEMU),)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-${CPU_ARCH} $(DTB) -M $(MODEL) -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-${CPU_ARCH} $(DTB) -M $(MODEL) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifneq ($(ADK_HARDWARE_QEMU),)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-${CPU_ARCH} $(DTB) -M $(MODEL) -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-${CPU_ARCH} $(DTB) -M $(MODEL) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
diff --git a/target/mips/Makefile b/target/mips/Makefile
index cac6858d2..f10f0033d 100644
--- a/target/mips/Makefile
+++ b/target/mips/Makefile
@@ -62,7 +62,7 @@ kernel-install: tools-compile
 ${BUILD_DIR}/${ROOTFSSQUASHFS}: ${BUILD_DIR}/root.squashfs
 	$(TARGET_CROSS)objcopy $(OSTRIP) -S $(LINUX_DIR)/vmlinux $(BUILD_DIR)/vmlinux.strip
 	dd if=$(BUILD_DIR)/vmlinux.strip of=${BUILD_DIR}/vmlinux bs=65536 conv=sync
-	lzma -9efzc ${BUILD_DIR}/vmlinux > $(BIN_DIR)/${TARGET_KERNEL}
+	lzma -9efzc ${BUILD_DIR}/vmlinux > $(FW_DIR)/${TARGET_KERNEL}
 	cp ${BUILD_DIR}/root.squashfs ${BUILD_DIR}/${ROOTFSSQUASHFS}
 endif
 ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y)
@@ -79,10 +79,10 @@ kernel-install:
 endif
 
 ifeq ($(ADK_TARGET_FS),nfsroot)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL)
-	@cp $(BUILD_DIR)/$(TARGET_KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
+imageinstall: kernel-install $(FW_DIR)/$(ROOTFSUSERTARBALL)
+	@cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The nfs root tarball is: ${FW_DIR}/${ROOTFSUSERTARBALL}'
 ifeq ($(ADK_TARGET_SYSTEM_FON_FON2100),y)
 	@echo 'Type the following in Redboot:'
 	@echo 'RedBoot> load $(TARGET_KERNEL)'
@@ -96,22 +96,22 @@ ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y)
 endif
 endif
 ifeq ($(ADK_TARGET_FS),yaffs)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo 'The root tarball is: ${BIN_DIR}/${ROOTFSTARBALL}'
+imageinstall: kernel-install $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo 'The root tarball is: ${FW_DIR}/${ROOTFSTARBALL}'
 	@echo 'Format your NAND with Routerboot, boot via NFS and'
 	@echo 'then install kernel and filesystem via:'
 	@echo 'adkinstall ${ROOTFSTARBALL}'
 endif
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifneq ($(ADK_HARDWARE_QEMU),)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following options:"
-	@echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0,hostfwd=tcp::2222-:22 -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0,hostfwd=tcp::2222-:22 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y)
 	@echo "Startup the netbook and type del to enter PMON:"
@@ -121,27 +121,27 @@ ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y)
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifneq ($(ADK_HARDWARE_QEMU),)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0,hostfwd=tcp::2222-:22 -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0,hostfwd=tcp::2222-:22 -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifneq ($(ADK_HARDWARE_QEMU),)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0,hostfwd=tcp::2222-:22 -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0,hostfwd=tcp::2222-:22 -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),usb)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y)
 	@echo "Startup the netbook and type del to enter PMON:"
 	@echo "PMON> load /dev/fs/ext2@usb0/boot/kernel"
@@ -150,10 +150,10 @@ ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y)
 endif
 endif
 ifeq ($(ADK_TARGET_FS),cf)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL)
-	@cp $(BUILD_DIR)/$(TARGET_KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSUSERTARBALL)"
+imageinstall: kernel-install $(FW_DIR)/$(ROOTFSUSERTARBALL)
+	@cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSUSERTARBALL)"
 	@echo "Boot the board via network (tftp+nfsroot) and use adkinstall."
 	@echo "If you just want to update, use adkupdate."
 endif
@@ -162,7 +162,7 @@ imageinstall: kernel-install ${BUILD_DIR}/${ROOTFSSQUASHFS}
 	@if [ $$($(STATCMD) ${BUILD_DIR}/${ROOTFSSQUASHFS}) -gt 3801088 ];then \
 		echo 'Image is too big!'; \
 	else \
-		${CP} ${BUILD_DIR}/${ROOTFSSQUASHFS} ${BIN_DIR}/${ROOTFSSQUASHFS}; \
+		${CP} ${BUILD_DIR}/${ROOTFSSQUASHFS} ${FW_DIR}/${ROOTFSSQUASHFS}; \
 		echo The image file is $(ROOTFSSQUASHFS); \
 	fi
 ifeq ($(ADK_TARGET_SYSTEM_FON_FON2100),y)
diff --git a/target/native/Makefile b/target/native/Makefile
index 7d267a292..3112b2a6a 100644
--- a/target/native/Makefile
+++ b/target/native/Makefile
@@ -15,23 +15,23 @@ KERNEL:=$(LINUX_DIR)/vmlinuz
 endif
 
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel+initramfs file is: ${BIN_DIR}/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel+initramfs file is: ${FW_DIR}/${TARGET_KERNEL}'
 endif
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
 ifeq ($(ADK_TARGET_FS),nfsroot)
-imageinstall: $(BIN_DIR)/$(ROOTFSUSERTARBALL)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
+imageinstall: $(FW_DIR)/$(ROOTFSUSERTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The nfs root tarball is: ${FW_DIR}/${ROOTFSUSERTARBALL}'
 endif
diff --git a/target/ppc/Makefile b/target/ppc/Makefile
index a59f8c8bb..3085e98cc 100644
--- a/target/ppc/Makefile
+++ b/target/ppc/Makefile
@@ -10,34 +10,34 @@ include $(TOPDIR)/mk/image.mk
 KERNEL:=$(LINUX_DIR)/vmlinux
 
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifeq ($(ADK_HARDWARE_QEMU),y)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-ppc -M mac99 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-ppc -M mac99 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_PPC),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-ppc -M mac99 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-ppc -M mac99 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_PPC),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-ppc -M mac99 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-ppc -M mac99 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
diff --git a/target/ppc64/Makefile b/target/ppc64/Makefile
index 2700d8874..2bc6e66cb 100644
--- a/target/ppc64/Makefile
+++ b/target/ppc64/Makefile
@@ -10,34 +10,34 @@ include $(TOPDIR)/mk/image.mk
 KERNEL:=$(LINUX_DIR)/vmlinux
 
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifeq ($(ADK_HARDWARE_QEMU),y)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-ppc64 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-ppc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_PPC64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-ppc64 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-ppc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_PPC64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-ppc64 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-ppc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
diff --git a/target/sh/Makefile b/target/sh/Makefile
index 5cf42b342..b7160a509 100644
--- a/target/sh/Makefile
+++ b/target/sh/Makefile
@@ -10,33 +10,33 @@ include $(TOPDIR)/mk/image.mk
 KERNEL:=$(LINUX_DIR)/arch/sh/boot/zImage
 
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifneq ($(ADK_HARDWARE_QEMU),)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following options:"
-	@echo 'qemu-system-${CPU_ARCH} -M r2d -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-${CPU_ARCH} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SH),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-${CPU_ARCH} -M r2d -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-${CPU_ARCH} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SH),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-{CPU_ARCH} -M r2d -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-{CPU_ARCH} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
diff --git a/target/sparc/Makefile b/target/sparc/Makefile
index 50814f034..6789ad7fe 100644
--- a/target/sparc/Makefile
+++ b/target/sparc/Makefile
@@ -10,33 +10,33 @@ include $(TOPDIR)/mk/image.mk
 KERNEL:=$(LINUX_DIR)/arch/sparc/boot/zImage
 
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC),y)
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-sparc -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img -append "root=/dev/sda1"'
+	@echo 'qemu-system-sparc -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img -append "root=/dev/sda1"'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-sparc -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-sparc -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-sparc -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-sparc -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
diff --git a/target/sparc64/Makefile b/target/sparc64/Makefile
index 7a31c1499..12900ec8c 100644
--- a/target/sparc64/Makefile
+++ b/target/sparc64/Makefile
@@ -10,38 +10,38 @@ include $(TOPDIR)/mk/image.mk
 KERNEL:=$(LINUX_DIR)/vmlinux
 
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC64),y)
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
 ifeq ($(ADK_TARGET_QEMU_WITH_VIRTIO),y)
-	@echo 'qemu-system-sparc64 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -drive file=qemu-${CPU_ARCH}.img,if=virtio,index=0 \
+	@echo 'qemu-system-sparc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -drive file=qemu-${CPU_ARCH}.img,if=virtio,index=0 \
 		-net nic,model=virtio -net user'
 else
-	@echo 'qemu-system-sparc64 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-sparc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-sparc64 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-sparc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-sparc64 -nographic -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-sparc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
diff --git a/target/x86/Makefile b/target/x86/Makefile
index b228810c7..ba665e4f2 100644
--- a/target/x86/Makefile
+++ b/target/x86/Makefile
@@ -10,63 +10,63 @@ include $(TOPDIR)/mk/image.mk
 KERNEL:=$(LINUX_DIR)/arch/x86/boot/bzImage
 
 ifeq ($(ADK_TARGET_FS),genext2fs)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "To install everything to CompactFlash use scripts/genext2.sh"
 endif
 
 ifeq ($(ADK_TARGET_FS),cf)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "To install everything to CompactFlash use scripts/install.sh"
 endif
 ifeq ($(ADK_TARGET_FS),nfsroot)
-imageinstall: $(BIN_DIR)/$(ROOTFSUSERTARBALL)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The linux kernel is here: $(BIN_DIR)/$(TARGET_KERNEL)'
-	@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
+imageinstall: $(FW_DIR)/$(ROOTFSUSERTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The linux kernel is here: $(FW_DIR)/$(TARGET_KERNEL)'
+	@echo 'The nfs root tarball is: ${FW_DIR}/${ROOTFSUSERTARBALL}'
 endif
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 ifeq ($(ADK_HARDWARE_QEMU),y)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-i386 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-i386 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 ifeq ($(ADK_HARDWARE_VBOX),y)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 	@echo "Use following command to create a VirtualBox Image:"
-	@echo "./scripts/create.sh -T vdi vbox-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh -T vdi vbox-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
 endif
 ifeq ($(ADK_TARGET_FS),usb)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "To install everything to USB use scripts/install.sh"
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_HARDWARE_QEMU),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-i386 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-i386 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/${TARGET_KERNEL}
-	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
+	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_HARDWARE_QEMU),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-i386 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-i386 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
 ifeq (${ADK_TARGET_FS},iso)
-imageinstall: ${BIN_DIR}/${ROOTFSISO}
+imageinstall: ${FW_DIR}/${ROOTFSISO}
 	@echo 'ISO image is at $<'
 endif
diff --git a/target/x86_64/Makefile b/target/x86_64/Makefile
index 5bfcf3764..b625a374c 100644
--- a/target/x86_64/Makefile
+++ b/target/x86_64/Makefile
@@ -10,43 +10,43 @@ include $(TOPDIR)/mk/image.mk
 KERNEL:=$(LINUX_DIR)/arch/x86/boot/bzImage
 
 ifeq ($(ADK_TARGET_FS),archive)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo 'The RootFS tarball is: ${BIN_DIR}/${ROOTFSTARBALL}'
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo 'The RootFS tarball is: ${FW_DIR}/${ROOTFSTARBALL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 	@echo "Use following command to create a QEMU Image:"
-	@echo "./scripts/create.sh qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
+	@echo "./scripts/create.sh qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),usb)
-imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "To install everything to USB use scripts/install.sh"
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
-imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
-	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
+imageinstall: $(FW_DIR)/$(INITRAMFS)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: createinitramfs
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-x86_64 -nographic -net user,hostfwd=tcp::2222-:22 -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),nfsroot)
-imageinstall: $(BIN_DIR)/$(ROOTFSUSERTARBALL)
-	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
-	@echo 'The linux kernel is here: $(BIN_DIR)/$(TARGET_KERNEL)'
-	@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
+imageinstall: $(FW_DIR)/$(ROOTFSUSERTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The linux kernel is here: $(FW_DIR)/$(TARGET_KERNEL)'
+	@echo 'The nfs root tarball is: ${FW_DIR}/${ROOTFSUSERTARBALL}'
 endif