Age | Commit message (Collapse) | Author |
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Since we use O_CREAT with open(), need to make sure to pass in mode too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
We call open() with O_CREAT, so make sure we pass in the mode else
we might get build errors with fortify source.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Include sys/stat.h for mknod() prototype.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Non-root users can't open /dev/mem, so it makes it hard to pass.
Ignore that case.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
We inherit the top-level Rules.mak which sets up this flag for us,
so just rely on that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Running `make clean` atm takes like 20 seconds because every subdir
re-evaluates all the toolchain flags. Add some helpers to automate
the process of setting up variables to cache the result of tests,
as well as the checking of an already set flag.
Now `make clean` takes like 2 seconds on my system.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
If SuSv3 legacy support is disabled, then mktemp() isn't available, and
we end up getting a lot of build errors. So add a fallback built on top
of tempnam() since that currently cannot be disabled.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
tst-clock2 should return 0 when _SC_THREAD_CPUTIME option isn't
available, instead of treating it as an error.
Further set the expected ret value as 0 avoiding to hide any real failures
in case of THREAD_CPUTIME feature available.
Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
tst-tls13 is expected to return 0 when passing.
Set higher timeout to avoid failure on slow archs.
Signed-off-by: Salvatore Cro <salvatore.cro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
strtoq should always return a quad_t and be an alias of strtol on
64 bit and strtoll on 32 bit.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
break it
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
These two failures are fixed:
Failure: Test: ilogb (0.0) == FP_ILOGB0 plus exceptions allowed
Failure: Test: ilogb (NaN) == FP_ILOGBNAN plus exceptions allowed
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
These failures no longer happen:
Failure: Test: scalb (2.0, 0.5) == NaN plus invalid exception
Failure: Test: scalb (3.0, -2.5) == NaN plus invalid exception
Failure: Test: rint (0.5) == 0.0
Failure: Test: rint (1.5) == 2.0
Failure: Test: rint (2.5) == 2.0
Failure: Test: rint (3.5) == 4.0
Failure: Test: rint (4.5) == 4.0
Failure: Test: rint (-0.5) == -0.0
Failure: Test: rint (-1.5) == -2.0
Failure: Test: rint (-2.5) == -2.0
Failure: Test: rint (-3.5) == -4.0
Failure: Test: rint (-4.5) == -4.0
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
test/math was not running at all, presume it has bit rotted:
It was trying to run libm-test.c as if it is a binary.
It was looking for libm-test-ulps (file with allowed
errors in lower bits) in arch-specific dirs which do not exist
in uclibc, as a result wrong file (libm-test.inc) was used instead.
Test failure was not showing the error result, user had to
fish it out from some .out files.
I added libm-test-ulps-ARCH files from recent glibc,
this filtered out a lot of false positives.
For example, cosf(M_PI_6l * 4.0) ideally should be -0.5,
we are getting -0.50000005047356477217, and this isn't
a failure (the difference is one lowest bit of mantissa).
"make check UCLIBC_ONLY=1 VERBOSE=1" still fails,
but not as catastrophically as before.
For the record, the failure occurs on the stage where we check
32-bit float functions, these tests fail:
Failure: Test: modf (NaN, &x) == NaN
Failure: Test: ilogb (NaN) == FP_ILOGBNAN plus exceptions allowed
Failure: Test: scalb (2.0, 0.5) == NaN plus invalid exception
Failure: Test: scalb (3.0, -2.5) == NaN plus invalid exception
Failure: Test: scalb (0, NaN) == NaN
Failure: Test: scalb (1, NaN) == NaN
Failure: Test: scalb (0, inf) == NaN plus invalid exception
Failure: Test: scalb (-0, inf) == NaN plus invalid exception
Failure: Test: scalb (1, inf) == inf
Failure: Test: scalb (-1, inf) == -inf
Failure: Test: scalb (inf, -inf) == NaN plus invalid exception
Failure: Test: scalb (-inf, -inf) == NaN plus invalid exception
Failure: Test: scalb (1, NaN) == NaN
Failure: Test: scalb (0, NaN) == NaN
Failure: Test: scalb (inf, NaN) == NaN
Failure: Test: pow (1, NaN) == 1
Failure: Test: pow (1, inf) == 1
Failure: Test: pow (-1, inf) == 1
Failure: Test: pow (1, -inf) == 1
Failure: Test: pow (-1, -inf) == 1
Failure: Test: rint (0.5) == 0.0
Failure: Test: rint (1.5) == 2.0
Failure: Test: rint (2.5) == 2.0
Failure: Test: rint (3.5) == 4.0
Failure: Test: rint (4.5) == 4.0
Failure: Test: rint (-0.5) == -0.0
Failure: Test: rint (-1.5) == -2.0
Failure: Test: rint (-2.5) == -2.0
Failure: Test: rint (-3.5) == -4.0
Failure: Test: rint (-4.5) == -4.0
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Add canonicalize_file_name function and its related tests.
Required by elfutils and coreutils (readlink).
Signed-off-by: Salvatore Cro <salvatore.cro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
tests: Added several nptl tests from glibc 2.10.1
Signed-off-by: Salvatore Cro <salvatore.cro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
tests: some cleanings on nptl tests' dependencies.
Signed-off-by: Salvatore Cro <salvatore.cro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
perusing the config parser
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
fixes issue2209:
ctime() was updated in 0.9.31 to call localtime_r() instead of
localtime() to
avoid using a static buffer. Unfortunately, this change replaces the
static
buffer (which is zeroed out on initialization) with an uninitialized
local
buffer.
In the common case, this has no effect. However, with a sufficiently
large
time_t value, the value returned differs from that returned by
asctime(localtime(t)), and thus violates the ANSI/ISO standard.
An example input is (on a 64-bit machine):
time_t t = 0x7ffffffffff6c600;
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
add testcase from
http://sourceware.org/bugzilla/show_bug.cgi?id=4407
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
part1; Needs improvement:
Think about a sensible way to map feature sets to the mandated syms.
Our LEGACY stuff maps to OB, OBXSI for example.
A "normal" config should satisfy the BASE (i.e. $foo.SUSv4.syms)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Conflicts:
libc/misc/utmp/utent.c
libc/sysdeps/linux/i386/bits/syscalls.h
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Conflicts:
Makefile.in
extra/Configs/Config.in
libc/sysdeps/linux/common/bits/kernel-features.h
libc/sysdeps/linux/common/poll.c
libc/sysdeps/linux/common/sysdep.h
libc/sysdeps/linux/sh/sysdep.h
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
defaults to "lib". Other prominent values include "lib32" or "lib64"
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Update nptl and tls Makefiles according to new sysdep headers structure
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|