Age | Commit message (Collapse) | Author |
|
When explicitly running the compile target we were missing a dependency
to generate the libm-test.c.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This matches a similar change made to glibc.
No functional changes here.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Add ulps file for Xtensa for the math test.
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Rename libm-test-ulps-sh4 to libm-test-ulps-sh as the ULPS file
is expected to match pattern libm-test-ulps-$(TARGET_ARCH).
Indeed "sh4" is the TARGET_SUBARCH.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
break it
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
These two failures are fixed:
Failure: Test: ilogb (0.0) == FP_ILOGB0 plus exceptions allowed
Failure: Test: ilogb (NaN) == FP_ILOGBNAN plus exceptions allowed
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
These failures no longer happen:
Failure: Test: scalb (2.0, 0.5) == NaN plus invalid exception
Failure: Test: scalb (3.0, -2.5) == NaN plus invalid exception
Failure: Test: rint (0.5) == 0.0
Failure: Test: rint (1.5) == 2.0
Failure: Test: rint (2.5) == 2.0
Failure: Test: rint (3.5) == 4.0
Failure: Test: rint (4.5) == 4.0
Failure: Test: rint (-0.5) == -0.0
Failure: Test: rint (-1.5) == -2.0
Failure: Test: rint (-2.5) == -2.0
Failure: Test: rint (-3.5) == -4.0
Failure: Test: rint (-4.5) == -4.0
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
test/math was not running at all, presume it has bit rotted:
It was trying to run libm-test.c as if it is a binary.
It was looking for libm-test-ulps (file with allowed
errors in lower bits) in arch-specific dirs which do not exist
in uclibc, as a result wrong file (libm-test.inc) was used instead.
Test failure was not showing the error result, user had to
fish it out from some .out files.
I added libm-test-ulps-ARCH files from recent glibc,
this filtered out a lot of false positives.
For example, cosf(M_PI_6l * 4.0) ideally should be -0.5,
we are getting -0.50000005047356477217, and this isn't
a failure (the difference is one lowest bit of mantissa).
"make check UCLIBC_ONLY=1 VERBOSE=1" still fails,
but not as catastrophically as before.
For the record, the failure occurs on the stage where we check
32-bit float functions, these tests fail:
Failure: Test: modf (NaN, &x) == NaN
Failure: Test: ilogb (NaN) == FP_ILOGBNAN plus exceptions allowed
Failure: Test: scalb (2.0, 0.5) == NaN plus invalid exception
Failure: Test: scalb (3.0, -2.5) == NaN plus invalid exception
Failure: Test: scalb (0, NaN) == NaN
Failure: Test: scalb (1, NaN) == NaN
Failure: Test: scalb (0, inf) == NaN plus invalid exception
Failure: Test: scalb (-0, inf) == NaN plus invalid exception
Failure: Test: scalb (1, inf) == inf
Failure: Test: scalb (-1, inf) == -inf
Failure: Test: scalb (inf, -inf) == NaN plus invalid exception
Failure: Test: scalb (-inf, -inf) == NaN plus invalid exception
Failure: Test: scalb (1, NaN) == NaN
Failure: Test: scalb (0, NaN) == NaN
Failure: Test: scalb (inf, NaN) == NaN
Failure: Test: pow (1, NaN) == 1
Failure: Test: pow (1, inf) == 1
Failure: Test: pow (-1, inf) == 1
Failure: Test: pow (1, -inf) == 1
Failure: Test: pow (-1, -inf) == 1
Failure: Test: rint (0.5) == 0.0
Failure: Test: rint (1.5) == 2.0
Failure: Test: rint (2.5) == 2.0
Failure: Test: rint (3.5) == 4.0
Failure: Test: rint (4.5) == 4.0
Failure: Test: rint (-0.5) == -0.0
Failure: Test: rint (-1.5) == -2.0
Failure: Test: rint (-2.5) == -2.0
Failure: Test: rint (-3.5) == -4.0
Failure: Test: rint (-4.5) == -4.0
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
add testcase from
http://sourceware.org/bugzilla/show_bug.cgi?id=4407
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Test build system modified to be similar to uClibc one:
* test custom logic moved from Makefile to a new Makefile.in (to be included
by Makefile).
* Makefile same for all tests and just used for including all other needed
makefiles.
Signed-off-by: Salvatore Cro <salvatore.cro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
|
|
|
|
|
|
so that it is easier to modify, sort, etc;
use __ in filenames of wrappers which wrap __functions
(it may be useful to have function and file names ALWAYS match);
remove names of not implemented wrappers (it was generating useless
empty .o files).
libm/ldouble_wrappers.c: comment out the wrapper which is
not compiled anyway
test/math/compile_test.c: improve this test, it was optimizing out some calls,
and we don't want that.
No actual code changes.
|
|
*: fix everything which prevents above from building
|
|
support is not enabled in uclibc to fix build.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
test/Rules.mak: don't pass target options to host build
test/math/basic-test.c: fix test build error
patching file test/unistd/errno.c: fix test build warning
|
|
|
|
|
|
|
|
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
find out what works/fails
|
|
make process
|
|
|
|
|
|
|
|
|
|
rm.patch:
* Define $(RM) as rm -f in Rules.mak and test/Rules.mak
(this is the same definition as gmake uses by default).
* Change all occurrences of rm and rm -f into $(RM).
|
|
|
|
many unsupported tests disabled for the moment.
-Erik
|
|
|
|
|
|
|