Age | Commit message (Collapse) | Author |
|
If backtrace support is turned on, build raise() and abort() with
unwind info (fixup 4c9b7f3c21ff21c199e54bfad2fdf3445fa4573d).
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Invalid signals have no handlers so when trying to restore the old
handler to a bad signal a SIGSEGV occurs. This is because the library
tries to store the old handler to an invalid memory area where it things
the bad signal lives.
URL: https://bugs.busybox.net/show_bug.cgi?id=4640
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Build raise and abort function with dwarf2 info by using
-fasynchronous-unwind-tables to make backtrace() working across a
call to abort.
A scenario where it could be useful is within a signal handler that
wants to dump a backtrace when catching some signal (i.e SIGABRT).
Without having abort & raise built with DWARF2 information, it is not
possible for the libgcc stack unwinder to walk through the call stack
out of the abort/raise function.
Impacts in terms of size are really limited
Current
text data bss dec hex filename
164 0 0 164 a4 ./libpthread/nptl/sysdeps/unix/sysv/linux/raise.os
164 0 0 164 a4 ./libpthread/nptl/sysdeps/unix/sysv/linux/raise.oS
220 24 4 248 f8 ./libc/stdlib/abort.os
With (-fasynchronous-unwind-tables)
text data bss dec hex filename
216 0 0 216 d8 ./libpthread/nptl/sysdeps/unix/sysv/linux/raise.os
216 0 0 216 d8 ./libpthread/nptl/sysdeps/unix/sysv/linux/raise.oS
280 24 4 308 134 ./libc/stdlib/abort.os
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Acked-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
fix bd3c1a2495cbcb51b606f8e4892fcd127f91e645 forgotten file.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
fix signed vs. unsigned comparison warnings while at it
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
sparc target has assembly implementations of clone.S that doesn't
get used, and thus the build breaks. Also, sparc is missing a header file in
pthreads.old that exists in pthreads.new.
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Resolver state is only available if DNS resolver is enabled.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
IPv4 should has 'V' capital letter.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
We need to define the rules for .S files so it
gets the include paths some architectures like mips
include headers
Some architectures e.g. SH have their own version
of pt-initfini.c so look for that first before resorting
to generic version of pt-initfini.c
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Extra / somehow does not match the target and complains that
$(top_builddir)libpthread/nptl/sysdeps/pthread/crti.o has no rules to
build
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
While there, fix epoll_pwait syscall, it takes 6 arguments
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
s/decriptor/descriptor/
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
use cancellation (with two 'l') uniformly.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
use __ret uniformly to avoid shadow warnings as seen on x86_64.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fixes compilation if NPTL is off.
I hope this doesn't break ARM EABI but cannot check ATM.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
This commit gives us a fully functioning NPTL on x86-64 by using the GOTOFF macro
as needed.
Signed-off-by: William Pitcock <nenolod@dereferenced.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This adds support for the TI C6X family of processors.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com>
Signed-off-by: Bernd Schmidt <bernds@codesourcery.com>
|
|
On C6X, the stack pointer points to a word that is not part of the current
function's stack frame. It may be overwritten by callees. Take this into
account when creating the stack for a cloned thread.
Signed-off-by: Bernd Schmidt <bernds@codesourcery.com>
|
|
This adds support for a new binary format, DSBT ELF, to the Makefiles.
Every shared library is assigned a DSBT index, and the link.so macro is
adjusted to ensure the correct linker argument is passed.
Configuration and ldso support will follow in separate commits.
Signed-off-by: Bernd Schmidt <bernds@codesourcery.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
IS_IN_LIBPTHREAD should be IS_IN_libpthread instead.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
STRICT_HEADERS
Remove ucontext.h if SUSV4_LEGACY is not set and fix it's references.
Guard sigstack structure with SUSV4_LEGACY and STRICT_HEADERS.
Disable sigstack function prototype, it is not provided by uClibc.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Add some missing prototypes
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
NPTL build did not use the correct bits/sigthread.h, use a common version
avoiding this.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Add some missing prototypes
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Avoid compile warnings about the use of undefined constants
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
ARM disables by default the support for ASM CFI directives.
Anyway using an old version of binutils that does not support some new
pseudo-op, the build fails as below:
AS libpthread/nptl/sysdeps/unix/sysv/linux/close.oS
libpthread/nptl/sysdeps/unix/sysv/linux/close.S: Assembler messages:
libpthread/nptl/sysdeps/unix/sysv/linux/close.S:9: Error: unknown pseudo-op: `.cfi_sections'
The problem is that the .cfi_sections pseudo should be wrapped by a macro
that expands to nothing when the CFI is off.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
CC: Khem Ray <ray.khem@gmail.com>
|
|
Because the nommu address space is flat, and the application stack can
literally be located anywhere, we cannot rely on the assumptions that the
mmu port gets away with. Namely, that the first thread's stack lives at
the top of memory and nothing will be created above it.
Currently, the code rounds the current stack up a page and sets that as
the "top" of the stack, and then marks the "bottom" of the stack as "1".
Then as new threads are created, this assumption is further refined by
slowly backing off the "bottom" when a new stack is created within the
range of the initial stack.
Simple ascii example (tid0 is the initial thread):
1 thread:
[bos tid0 stack tos]
2 threads:
[ tid0 stack ]
[tid1 stack]
3 threads:
[ tid0 stack ]
[tid1 stack]
[tid2 stack]
As you can kind of see, this algorithm operates on one basic assumption:
the initial top of stack calculation is the absolute top of the stack.
While this assumption was fairly safe in the original nommu days of yore
where the only file format was FLAT (which defaults to a 4KiB stack --
exactly 1 page), and memory was fairly tight, we can see that this falls
apart pretty quickly as soon as the initial stack is larger than a page.
The issue that crops up now is simple to hit: start an application with
an 8KiB stack, execute some functions that put pressure on the stack so
that it exceeds 4KiB, then start up some threads. The initial tos will
be rounded up by a page, but this is actually the middle of the stack.
Now when the initial thread returns from its functions (thus unwinding
the stack) and tries to call something which calls back into libpthread,
the thread_self() func fails to detect itself as the initial thread as
the current stack is now above the tos. The __pthread_find_self() func
kicks in, walks all the thread arrays, fails to find a hit, and then
walks into uninitialized memory for the thread descriptor. Use of this
garbage memory has obvious results -- things fall down & go boom.
To address this, I extend the current algorithm to automatically scale
back both the bottom and the top stack limits of the initial thread.
We use the current stack pointer at "thread boot time" only as a single
known point. The initial thread stack bottom is set to the bottom of
memory and the initial thread stack top is set to the top of memory.
Then as we create new stack threads, we figure out whether the new stack
is above or below the single known good address, and then scale back
either the tos or the bos accordingly.
Reviewed-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Thanks to Nitin Garg for notincing!
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Nitin Garg <nitingarg98@gmail.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The current C macro magic does not correctly concatenate the
__USER_LABEL_PREFIX__ string on architectures where it has a
non-empty value. We need to use __stringify to get the desired
behaviour.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
This patch adds a working implementation of pthread_create for architectures
where STACK_GROWS_UP.
Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
defined
A missing change in the previous commit.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
A sample of the warning reported while building for ARM that has not __ASSUME_TGKILL defined.
libpthread/nptl/sysdeps/unix/sysv/linux/raise.c: In function 'raise':
libpthread/nptl/sysdeps/unix/sysv/linux/raise.c:33:5: warning: "__ASSUME_TGKILL" is not defined
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Finally got around to testing out latest master and
noticed that some buildsystem work last summer broke
shared-builds of nptl on sparc.
A version of __syscall_error.c needs to be linked into
both libpthread and librt
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
With commit "resolv.c: add support for per thread res_state"
(aab4df0fb51660300559f5f29290709db2f7bfee) _res symbol is now marked
as hidden in an attempt to make the resolver per-thread.
Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
driver or ld itself
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
__pthread_once
We need to use __pthread_once_internal if available this macro is
therefore used to notify that.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
pt-*.c files
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
My change a49b3a18e463cbe8c94c41501e386e7f4c61609e fixed two
Unwind_Resume calls to go via PLT to avoid text relocations for PIC
builds. However, it looks the reason for upstream not using PLT calls
is that ebx gets clobbered. So we need to reload it.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Add __tls_get_addr function to static libc allowing to handle
local dynamic TLS access model.
On SH, linker optimizations are not required, so __tls_get_addr
can be called even in statically linked binaries.
Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
implementation"
This reverts commit 0c468129356f5ce6780e7369c271d74631ae03ba.
Indeed recent updates into buildsys managed to filter-out generic implementation
when arch specific one is defined, so duplicated symbols into the libc.a
In the meanwhile, do a minor fix into mips version not using relative path
to include <generic/libc-tls.c>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
libpthread/nptl/sysdeps/generic/libc-tls.c is built as well, so it does not need
that arch specific version of libc-tls.c (MIPS and ALPHA) includes it.
The arch libc-tls.s is aimed to provide the implementation of __tls_get_addr
for the static libc.a, because on these archs the linker relaxations are not
required and it could be possible to have local-dynamic access models in static
libraries as well.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|