| Age | Commit message (Collapse) | Author |
|---|
|
Threads currently have 2-4 MiB stacks by default (depending on the
platform). This is fine on MMU platforms, where this stack space is not
actually allocated until it is used, but tends to waste a large amount
of memory on no-MMU platforms.
This patch adds a PTHREADS_STACK_DEFAULT_SIZE Kconfig option that allows
the user to override the default stack size at build time. This allows
the user to select a reasonable default stack size for the software that
runs on their system, and avoids the need to patch every package to add
calls to pthread_attr_setstacksize().
An alternative to this patch would be to change the hardcoded default
stack size on no-MMU platforms, but it is difficult to choose an
appropriate value because the minimum required stack depends on the
software in use. This would also be a breaking change.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
|
|
Fix the [-Warray-parameter=] warning for __sigsetjmp generated by GCC 11 and
later GCC versions:
|
| warning: argument 1 of type 'struct __jmp_buf_tag *' declared as a pointer [-Warray-parameter=]
| extern int __sigsetjmp (struct __jmp_buf_tag *__env, int __savemask) __THROWNL;
| ...
| note: previously declared as an array 'struct __jmp_buf_tag[1]'
| extern int __sigsetjmp (struct __jmp_buf_tag __env[1], int __savemask)
|
Use the same fix as in glibc. The fix is to move the struct __jmp_buf_tag
definition to a separate bits/ header so it can be included in
pthread.h, to allow to use an array (as in setjmp.h) rather than a pointer
in the declaration.
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
When uclibc is built with static PIE support the _dl_load_base variable
shared between the libc-tls.c and reloc_static_pie.c creates the
dependency that requires linking reloc_static_pie.o into static
position-dependent executables resulting in the following build errors:
gcc -static test.c -o test
...ld:
...usr/lib/libc.a(reloc_static_pie.os):(.text+0x0):
undefined reference to `_DYNAMIC'
Move _dl_load_base definition to libc-tls.c to resolve this dependency
and fix static PDE build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Static PIE ELFs may be loaded on noMMU linux platforms with FDPIC
support, but they don't have adjustable brk, and thus cannot allocate
memory for the TLS. Use mmap instead of sbrk to allocate initial TLS
memory when building with static PIE support for noMMU.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
on i386, x86_64, and arm.
This patch adds the generation of rcrt1.o which is used by gcc when compiling with the --static-pie flag.
rcrt1.o differs from crt1.o and Scrt1.o in that it the executable has a dynamic section but no relocations have been performed prior to _start being called.
crt1.o assumes there to be no dynamic relocations, and Scrt1.o has all relocations performed prior to execution by lsdo.
The new reloc_static_pie function handles parsing the dynamic section, and performing the relocations in a architecture agnostic method.
It also sets _dl_load_base which is used when initalizing TLS to ensure loading from the proper location.
This allows for easier porting of static-pie support to additional architectures as only modifications to crt1.S to find the load address are required.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
TLS)
Create timer thread with sufficiant stack size (take into account
allocated space for thread-local-storage), for this backport glibc
commit 'Create internal threads with sufficient stack size' ([1],
[2]) introducing __pthread_get_minstack() and use it in
__start_helper_thread().
Fixes timer_create() in case of linking with library using large
TLS area (e.g openblas, see [3]).
[1] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=2c1094bd700e63a8d7f547b3f5495bedb55c0a08
[2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=630f4cc3aa019ede55976ea561f1a7af2f068639
[3] http://lists.busybox.net/pipermail/buildroot/2021-April/308281.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
|
|
This commit adds support for Kalray VLIW family (kvx)
Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the
third of the KV family has the following features:
32/64 bits execution mode
6-issue VLIW architecture
64 x 64bits general purpose registers
SIMD instructions
little-endian
In order to build a usable toolchain, build scripts are provided at the
following address: https://github.com/kalray/build-scripts.
Kalray uses FOSS which is available at https://github.com/kalray
This includes Linux kernel, uClibc-ng, gcc, binutils, etc.
Signed-off-by: Clément Léger <cleger@kalray.eu>
Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu>
Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu>
Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu>
Signed-off-by: Marius Gligor <mgligor@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
This reverts commit 5b58a1ebd89a4f05778441814e81817c82193fa3.
This breaks all static builds earlier to gcc 10 :(
Bad testing on my side.
|
|
Starting with GCC-10 multiple definitions of global variables by will be
rejected.
https://gcc.gnu.org/gcc-10/porting_to.html
This fixes multiple definitions of _dl_pagesize and _dl_tls_static_size
while attempting static linking.
Of course this only occurs when compiling something that requires these
symbols.
First patch submission so hopefully all done correctly.
thanks,
Lance Fredrickson
From e0686f7c03ce8e51ccffefeb6365e50311e6dd10 Mon Sep 17 00:00:00 2001
From: lancethepants <lancethepants@gmail.com>
Date: Wed, 15 Jul 2020 13:09:26 -0600
Subject: [PATCH] Starting with GCC-10 multiple definitions of global variables
by will be rejected. This fixes multiple definitions of _dl_pagesize and
_dl_tls_static_size while attempting static linking.
|
|
Add XCHAL definitions for S32C1I and EXCLUSIVE options to
xtensa-config.h, include it in places that implement atomic operations
and add implementations with exclusive access option opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Rename various spare fields in structs to include a namespace
This should avoid accidental clashes with uses of the __unused symbol
in upstream projects. eg currently it causes a compile error in dhcpcd 8.x
due to their re-use of the __unused symbol as a macro
This follows the style of glibc which does something equivalent
|
|
|
|
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
basically from or1k port of uClibc-ng, with fixes for structures in
pthreadtypes.h from 64 bit architectures.
18 testsuite failures counted.
|
|
The return type of syscall() is long so __syscall_error, which is jumped
to by syscall handlers to stash an error number into errno, must return
long too otherwhise it returs 4294967295L instead of -1L. For example,
syscall for x86_64 is defined in libc/sysdeps/linux/x86_64/syscall.S as
syscall:
movq %rdi, %rax /* Syscall number -> rax. */
movq %rsi, %rdi /* shift arg1 - arg5. */
movq %rdx, %rsi
movq %rcx, %rdx
movq %r8, %r10
movq %r9, %r8
movq 8(%rsp),%r9 /* arg6 is on the stack. */
syscall /* Do the system call. */
cmpq $-4095, %rax /* Check %rax for error. */
jae __syscall_error /* Branch forward if it failed. */
ret /* Return to caller. */
In libc/sysdeps/linux/x86_64/__syscall_error.c, __syscall_error is
defined as
int __syscall_error(void) attribute_hidden;
int __syscall_error(void)
{
register int err_no __asm__ ("%rcx");
__asm__ ("mov %rax, %rcx\n\t"
"neg %rcx");
__set_errno(err_no);
return -1;
}
So __syscall_error returns -1 as a 32-bit int in a 64-bit register, %rax
(0x00000000ffffffff, whose decimal value is decimal 4294967295) and a
test like this always returns false:
if (syscall(number, ...) == -1)
foo();
Fix the error by making __syscall_error return a long, like syscall().
The problem can be circumvented by the caller by coercing the returned
value to int before comparing it to -1:
if ((int) syscall(number, ...) == -1)
foo();
The same problem probably occurs on other 64-bit systems but so far only
x86_64 was tested, so this change must be considered experimental.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
|
|
This patch seems needed in builds where
- SHARED is not defined (no shared lib support)
- and USE_TLS is set
Without this patch, static_dtv is free'ed.
See the following backtrace:
0 __do_check_chunk (p=0x52638 <fork_handler_pool+2296>) at libc/stdlib/malloc-standard/malloc.c:80
1 0x0000000000017fa0 in __do_check_inuse_chunk (p=0x52638 <fork_handler_pool+2296>) at libc/stdlib/malloc-standard/malloc.c:143
2 0x0000000000017354 in free (mem=0x52648 <static_dtv>) at libc/stdlib/malloc-standard/free.c:293
3 0x000000000002d5b0 in _dl_deallocate_tls (tcb=0x58690, dealloc_tcb=false) at libpthread/nptl/sysdeps/generic/dl-tls.c:588
4 0x0000000000021c0c in __deallocate_stack (pd=0x58000) at libpthread/nptl/allocatestack.c:717
5 0x0000000000024408 in __free_tcb (pd=0x58000) at libpthread/nptl/pthread_create.c:217
6 0x00000000000200ac in pthread_join (threadid=360448, thread_return=0x0 <k1c_start>) at libpthread/nptl/pthread_join.c:109
7 0x0000000000010354 in tf (a=0x58000) at tst-basic3.c:42
8 0x00000000000247c8 in start_thread (arg=0x4000200960) at libpthread/nptl/pthread_create.c:285
9 0x0000000000026560 in ?? ()
This backtrace is obtained while debugging tst-basic3 from the uclibc-ng nptl testsuite.
It aborts because of the assert in malloc:
https://elixir.bootlin.com/uclibc-ng/v1.0.31/source/libc/stdlib/malloc-standard/malloc.c#L80
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Replace sbrk with mmap since this commit disables sbrk area
for FDPIC MMU-less platform:
fs/binfmt_elf_fdpic.c: fix brk area overlap with stack on NOMMU
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/fs/binfmt_elf_fdpic.c?id=4ac313111018cb44ecc250445de5ccb93026a980
* libpthread/nptl/sysdeps/generic/libc-tls.c (__libc_setup_tls):
Handle __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
busybox init checks it has pid 1, but getpid() returns another value
when building busybox statically. This is because the corresponding
area is not cleared when allocated (it is allocated with
MAP_UNINITIALIZED, whose behavior depends on the Linux kernel's
CONFIG_MMAP_ALLOW_UNINITIALIZED).
This patch fixes the problem by explicitly clearing the memory area.
* libpthread/nptl/sysdeps/generic/libc-tls.c (__libc_tls_setup):
Clear tlsblock.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
phdr->p_vaddr of TLS segment is not a valid value for FDPIC so we can
either translate phdr->p_vaddr using loadmap (not easy here) or use a
new linker script defined symbol, whih this patch does.
* libpthread/nptl/sysdeps/generic/libc-tls.c (__tdata_start): Declare.
(__libc_setup_tls): Support __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
They do not work on MMU-less systems.
For atfork, implement a hidden function that always returns EPERM.
* libpthread/nptl/sysdeps/unix/sysv/linux/fork.c: Disable if
__ARCH_USE_MMU__ is not defined.
* libpthread/nptl/sysdeps/unix/sysv/linux/libc_pthread_init.c
(__libc_pthread_init): Handle __ARCH_USE_MMU__.
* libpthread/nptl/sysdeps/unix/sysv/linux/register-atfork.c: Likewise.
* libpthread/nptl/sysdeps/unix/sysv/linux/unregister-atfork.c: Likewise.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
|
|
In libc/sysdeps/linux/common/bits/uClibc_pthread.h:
extern void weak_function _pthread_cleanup_push_defer(...)
This *weak_function* declaration will cause nptl/cleanup_defer_compat.c:
strong_alias (...) !!!FAIL!!!, because it include pthreadP.h->pthread.h
->uClibc_pthread.h
That means:
Readelf -s libpthread/nptl/cleanup_defer_compat.o you will get:
18: 00000000 198 FUNC WEAK DEFAULT 1 _pthread_cleanup_push_def
Readelf -s libc/misc/internals/__uClibc_main.o you will also get:
32: 00000038 58 FUNC WEAK DEFAULT 1 _pthread_cleanup_push_def
Final: gcc malloc_pthread_test.c -lpthread
The libc/stdlib/malloc-standard/malloc.c:839 (__MALLOC_LOCK->
_pthread_cleanup_push_def) will use the one in __uClibc_main.o
!!!not in cleanup_defer_compat.o!!!, becasue two cleanup_defer_compat in
libc.a with the same weak declarations and the __uClibc_main.o is close
to front.
====
All of malloc/free will failed in muti-threads' race conditions
probabilistic.
As it happens, uClibc-0.9.33.2 is OK, Becasue:
It's seperated in libpthread.a and libc.a, and the libc.a is the
last lib for ld internal-cmd, and malloc will get right cleanup_defer_compat
from libpthread.a.
This BUG is from 2016-09-24 to now:
>>>
commit 29ff9055c80efe77a7130767a9fcb3ab8c67e8ce
Author: Waldemar Brodkorb <wbx@uclibc-ng.org>
Date: Sat Sep 24 02:55:31 2016 +0200
use a single libc and deduplicate threading code
Similar to musl libc a single libc has many benefits and solves
some open issues with uClibc-ng.
- no pthread_mutex_* weak symbols exported anymore
- applications no longer failing to link when either
-lrt or -lpthread are missing for dynamic and static linking mode
- smaller C library
- slightly better runtime performance
<<<
Perharps we need carefully check all of the impact about that commit.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Only mips/x86/x86_64 needs a special version of lowlevellock.h.
No regressions found.
|
|
Port over NPTL/TLS support from GNU C Library.
In the first step only the slower syscall is used for TLS
access. The uClibc-ng testsuite shows 79 errors, so their
is room for bugfixes and improvements.
|
|
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
|
|
From or1k-glibc from blueCmd, his commit "Fix TLS, removed too much in
rebase".
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
|
|
Fix iteration over signals, synced with GNU C library code and
pending patches. Issues found when running dhcpcd with hook
scripts. (exit status 127)
Reported-By: kapeka <kapeka@bering-uclibc.de>
|
|
Follow the steps to build c-sky uclibc linux system:
1. git clone https://github.com/c-sky/buildroot.git
2. cd buildroot
3. make qemu_csky_ck810_uclibc_defconfig
4. make
Follow the buildroot/board/qemu/csky/readme.txt to run.
This buildroot toolchain is pre-build, But you can rebuild
the c-sky uclibc-ng alone and install it to the buildroot
sysroot manually.
We'll try our best to improve the uclibc-ng continuously.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
warning: unused variable 'self' [-Wunused-variable]
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Similar to a changeset planned in GNU C library remove
any assembly code from sysdep-cancel.h. This allows
to port to new architectures in a simpler way.
|
|
|
|
Following glibc commit a358c805300e358e30d4788a6f19c69988623a5c
|
|
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
For the linux kernel (since 2.6.12) MAKE_THREAD_CPUCLOCK
macro-like computation should be used to get clockid.
|
|
cleanup unused and unsupported code.
|
|
|
|
As reported by Buildroot developers these files causing static
linking issues. The original contribution with the ARM unwind-resume
rework and GNU libc sync was made before the combined libc change.
But the patch was applied later, after the libc change and
it seems the test coverage for static linking didn't catch it in
the regression testing. Remove the files.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
Ported over from GNU C Library and runtime tested in Qemu.
|
|
Follow GNU C Library from c579f48edba88380635ab98cb612030e3ed8691e
and remove the PID caching. These simplifies the architecture specific
assembly code.
The run of the test suite found no regressions, it even solves
some of the test failures for x86/x86_64/sparc.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
Acked-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
|
|
This commit includes following features.
1. Support NPTL/TLS
2. Add libm function which is used to handle FP rounding and excpetions
(ex: fclrexcpt,fedisblxcpti,feenablxcpt... )
3. Add *context function for operating user context
(ex: setcontext,getcontext,makecontext... )
4. Change the return flow from signal handler
5. Cleanup of old code
The testsuite only has 2 errors, tst-cpuclock1 and tst-cputimer1,
which are related to timing accuracy. (math and locale tests are disabled)
Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com>
|
|
uClibc-ng 1.0.20 fixed static linking with "libdl" by adding all libdl functions
into the libc. On xtensa, though, libdl contains an unresolved reference that is
satisfied by the ld.so - which is not a part of the linking in a static case.
Signed-off-by: Alexey Neyman <stilor@att.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
As __UCLIBC_HAS_GETTEXT_AWARENESS__ is never defined, this is
mostly dead code. It is planned to integrate libiconv-tiny
and gettext-tiny into uClibc-ng after the next release, so
that more software packages can be used without modification.
Remove any _/_N macro usage.
|
|
|
|
Since librt and libpthread are now integrated into libc, including
unwind-resume and unwind-forcedunwind implementations of unwind code
makes no sense. Only unwind-forcedunwind is now included with
functions hidden to avoid them overriding the ones from libgcc_s.
* libpthread/nptl/sysdeps/generic/unwind-resume.h: New. Define
generic PERSONALITY_PROTO and PERSONALITY_ARGS and set
HAVE_ARCH_UNWIND_RESUME to 0.
* libpthread/nptl/sysdeps/pthread/unwind-resume.c: Move...
* libpthread/nptl/sysdeps/generic/unwind-resume.c: ... here. Include
generic implementation of _Unwind_Resume on the condition that
!HAVE_ARCH_UNWIND_RESUME. Make functions hidden to prevent them
from overriding libgcc_s's ones.
* libpthread/nptl/sysdeps/pthread/unwind-forcedunwind.c: Likewise.
* libpthread/nptl/sysdeps/arm/unwind-resume.h: New. Define
ARM-specific PERSONALITY_PROTO and PERSONALITY_ARGS and set
HAVE_ARCH_UNWIND_RESUME to 1.
* libpthread/nptl/sysdeps/arm/arm-unwind-resume.c,
* libpthread/nptl/sysdeps/arm/pt-arm-unwind-resume.c,
* libpthread/nptl/sysdeps/arm/rt-arm-unwind-resume.c: New.
ARM-specific implementations of _Unwind_Resume resp. for libc,
libpthread and librt.
* libpthread/nptl/sysdeps/Makefile.commonarch: Remove both
arm-unwind-resume and rt-arm-unwind-resume from
libpthread_arch_CSRC.
* libpthread/nptl/sysdeps/unix/sysv/linux/arm/unwind-forcedunwind.c,
* libpthread/nptl/sysdeps/unix/sysv/linux/arm/unwind-resume.c: Remove.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
|
|
|
