| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
When uclibc is built with static PIE support the _dl_load_base variable
shared between the libc-tls.c and reloc_static_pie.c creates the
dependency that requires linking reloc_static_pie.o into static
position-dependent executables resulting in the following build errors:
gcc -static test.c -o test
...ld:
...usr/lib/libc.a(reloc_static_pie.os):(.text+0x0):
undefined reference to `_DYNAMIC'
Move _dl_load_base definition to libc-tls.c to resolve this dependency
and fix static PDE build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
on mips
Updated config to allow compilation of rcrt1.o for mips and modified it's crt1.S to perform relocates in __start.
The mips architecture performs relocations differently then most other architectures. reloc_static_pie was rewritten, taking code from dl-startup.c, in order to perfrom the additional relocations. Modifications were made to mips' dl-startup.h to allow for the use of contained macros without including _start definition.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
on aarch64
Updated config to allow compilation of rcrt1.o for aarch64 and modified it's crt1.S to relocate dynamic section prior to __uClibc_main.
Disabled stack protector when compiling reloc_static_pie.c to avoid TLS access prior to it being setup.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
There is a real-world usage of RUSAGE_THREAD by the pistache project,
https://github.com/oktal/pistache.
Reported-By: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
on i386, x86_64, and arm.
This patch adds the generation of rcrt1.o which is used by gcc when compiling with the --static-pie flag.
rcrt1.o differs from crt1.o and Scrt1.o in that it the executable has a dynamic section but no relocations have been performed prior to _start being called.
crt1.o assumes there to be no dynamic relocations, and Scrt1.o has all relocations performed prior to execution by lsdo.
The new reloc_static_pie function handles parsing the dynamic section, and performing the relocations in a architecture agnostic method.
It also sets _dl_load_base which is used when initalizing TLS to ensure loading from the proper location.
This allows for easier porting of static-pie support to additional architectures as only modifications to crt1.S to find the load address are required.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
Implement getcontext, makecontext, setcontext and swapcontext.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
getaddrinfo() returns addresses from, at least, ip(7) and ipv6(7),
but _addr() always uses sin_addr from struct sockaddr_in;
we're saved from wild unsoundness (or incompatibility)
by virtue of struct sockaddr_in6 having an always-0 u32 sin6_flowinfo
at the same offset, so we end up returning 0 anyway,
but in a round-about and definitely unintended way
Instead, limit the request to AF_INET, and fall through to the end
early, returning the default id=0
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
|
|
Explicitly include stdint header as logic uses INT[64]_MAX, just
in case for future, even though the chain of headers from existing
includes brings in the definition indirectly as of now.
Cross check for time gap between prngplus reseeding, periodically,
has the internal state is being consumed, so that if there is too
much time gap, then prng reseeding can be forced, before the normal
reseed window is reached. This is useful for long running programs
which trigger dns queries only intermittently.
If clock_gettime is not available, then reseed more frequently, by
default. A platform developer may change the reseed frequence, to
be bit more less often in this case, if needed, by tweaking the
defines in the source.
Signed-off-by: hanishkvc <hanishkvc@gmail.com>
|
|
This borrows getloadavg.c from musl.
getloadavg pops up often. Recently llvm and rust are dependent on it.
glibc and musl have it and no-one actually checks if it's available in your libc.
It's just become way easier to add it in uclibc-ng rather than patch everything else.
Signed-off-by: Lance Fredrickson <lancethepants@gmail.com>
|
|
This macro exists since Linux 2.6.25 [1] and is defined in glibc
since 2.14 [2] for sparc and most supported architectures.
RLIMIT_RTTIME has been added later for mips [3] and alpha [4].
For example, RLIMIT_RTTIME is needed to build qemu 7.0.0 with
Linux user-land emulation support [5].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=78f2c7db6068fd6ef75b8c120f04a388848eacb5
[2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=67f86a251e0d36107fe28999281d46e76941c7b9
[3] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=8969f4df1a526aa60dd0bc1c4736cf02104d4a05
[4] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=53c2cb7641bd866398156625ef672bbd2d78a0d8
[5] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=244fd08323088db73590ff2317dfe86f810b51d7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
|
|
Dns lookup logic has been updated to provide a configurable compile
time selection of dns query id generation logics, including random,
where possible, instead of the previous simple counter mode.
This should make dns poison attempts more difficult. The uclibc
developers wish to thank the white hat teams which alerted the
community about the possible weakness in the dns path, given the
increased resources with adversaries today.
Given that embedded systems may or may not have sources for trying
to generate random numbers, and also to try and keep the load on
the system low, by default it uses the standard random prng based
logic to indirectly generate the ids.
However if either urandom or else if realtime clock is available on
the target, then the same is used to reseed the prng periodically
in a slightly non deterministic manner. Also additional transform
(one way where possible) is used to avoid directly exposing the
internal random sequence.
The dns lookup logic maintains its own state wrt the random prng
functions, so that other users of the library's random prng are
not affected wrt their operations with the prng.
Note to Platform developers:
If you want to change from the default prngplus based logic, to one
of the other logics provided, then during compile/config time you can
switch to one of these additional choices wrt dns query id generation,
by using make config and companions.
If your platform doesnt support urandom nor a realtime clock backed
by a source with sufficient resolution, and or for some reason if you
want to revert to previous simple counter, rather than the transformed
random prng plus logic, you can force the same at compile time by
selecting SimpleCounter mode.
If you want to increase the randomness of the generated ids, and dont
mind the increased system load and latency then you could select the
Urandom mode during config. Do note that it will be dipping into the
entropy pool maintained by ur system.
If your target has a system realtime clock available and exposed to
user space, and inturn if you want to keep the underlying logic simple,
you could try using the clock option from the config. However do note
that the clock should have nanosecond resolution to help generate ids
which are plausibly random. Also improvements to processor and or io
performance can affect this.
Wrt the URandom and Clock modes, if there is a failure with generation
of the next random value, the logic tries to fallback to simple counter
mode.
If you want to change the underlying logic to make it more random
and or more simple, look at dnsrand_setup and dnsrand_next.
Signed-off-by: hanishkvc <hanishkvc@gmail.com>
|
|
The ARM implementation of memset has a bug when the fill-value is negative or outside the
[0, 255] range. To reproduce:
char array[256];
memset(array, -5, 256);
This is supposed to fill the array with int8 values -5, -5, -5, ... . On ARM, this does
not work because the implementation assumes the high bytes of the fill-value argument are
already zero. However in this test case they are filled with 1-bits. The aarch64 and x86_64
implementations do not have this problem: they first convert the fill-value to an unsigned
byte following the specification of memset.
With GCC one can use `memset(ptr, (-5 & 0xFF), size)` as a workaround, but for clang
users that does not work: clang optimizes the `& 0xFF` away because it assumes that
memset will do it.
Signed-off-by: Tom Bannink <tombannink@gmail.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
|
|
|
|
Defined in kernel v3.14, commit
aab03e05e8f7 ("sched/deadline: Add SCHED_DEADLINE structures & implementation")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
|
|
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
|
|
|
|
|
|
|
|
When MD_FALLBACK_FRAME_STATE_FOR handler in libgcc unwind code checks
the second instruction opcode in __default_rt_sa_restorer function,
it expects to see the following values for ARC cores:
- 0x7ee0781e for ARCv2 LE
- 0x003f226f for ARC700 LE
ARC700 value correspond to trap0 instruction. ARCv2 value corresponds
to the following code:
traps_0
j_s [blink]
However, unlike glibc, uClibc implementation of __default_rt_sa_restorer
for ARC does not have that jump. Hence libgcc unwind code is not able
to recognize signal frame correctly on ARCv2 and completes too early.
This change fixes libgcc unwinding over signal frame on ARCv2 adding
missing jump to __default_rt_sa_restorer.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
|
|
Fixes those two warnings:
In file included from <command-line>:
libc/sysdeps/linux/common/openat64.c:18:33: warning: 'openat64' alias between functions of incompatible types 'int(int, const char *, int, ...)' and 'int(int, const char *, int, mode_t)' {aka 'int(int, const char *, int, unsigned int)'} [-Wattribute-alias=]
18 | strong_alias_untyped(__openat64,openat64)
| ^~~~~~~~
./include/libc-symbols.h:177:31: note: in definition of macro '_strong_alias_untyped'
177 | extern __typeof (aliasname) aliasname __attribute__ ((alias (#name))) __attribute_copy__ (name);
| ^~~~~~~~~
libc/sysdeps/linux/common/openat64.c:18:1: note: in expansion of macro 'strong_alias_untyped'
18 | strong_alias_untyped(__openat64,openat64)
| ^~~~~~~~~~~~~~~~~~~~
libc/sysdeps/linux/common/openat64.c:14:12: note: aliased declaration here
14 | static int __openat64(int fd, const char *file, int oflag, mode_t mode)
| ^~~~~~~~~~
and
CC libc/sysdeps/linux/common/stat.os
libc/sysdeps/linux/common/stat.c: In function 'stat':
libc/sysdeps/linux/common/stat.c:28:40: warning: passing argument 3 of 'fstatat64' from incompatible pointer type [-Wincompatible-pointer-types]
28 | return fstatat64(AT_FDCWD, file_name, buf, 0);
| ^~~
| |
| struct stat *
In file included from libc/sysdeps/linux/common/stat.c:11:
./include/sys/stat.h:258:35: note: expected 'struct stat64 * restrict' but argument is of type 'struct stat *'
258 | struct stat64 *__restrict __buf, int __flag)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
- use the provided __res_state() method instead of direct access
to struct __res_state pointer &_res/*__resp
- change the __UCLIBC_HAS_TLS__ protected __res_state() implementation
to the one where the comment 'When threaded, _res may be a per-thread
variable.' indicates this should be used with threads/TLS enabled
Fixes the following segfaults with buildroot raspberrypi3_64_defconfig
(uclibc, -Os, Note: runs fine using the raspberrypi3_defconfig):
$ /usr/sbin/ntpd -n -d
1970-01-01T00:01:49 ntpd[249]: INIT: ntpd ntpsec-1.2.0 2021-11-03T20:39:50Z: Starting
1970-01-01T00:01:49 ntpd[249]: INIT: Command line: /usr/sbin/ntpd -n -d
1970-01-01T00:01:49 ntpd[249]: INIT: precision = 7.240 usec (-17)
1970-01-01T00:01:49 ntpd[249]: INIT: successfully locked into RAM
1970-01-01T00:01:49 ntpd[249]: CONFIG: readconfig: parsing file: /etc/ntp.conf
1970-01-01T00:01:49 ntpd[249]: CONFIG: restrict nopeer ignored
1970-01-01T00:01:49 ntpd[249]: INIT: Using SO_TIMESTAMPNS
1970-01-01T00:01:49 ntpd[249]: IO: Listen and drop on 0 v6wildcard [::]:123
1970-01-01T00:01:49 ntpd[249]: IO: Listen and drop on 1 v4wildcard 0.0.0.0:123
1970-01-01T00:01:49 ntpd[249]: IO: Listen normally on 2 lo 127.0.0.1:123
1970-01-01T00:01:49 ntpd[249]: IO: Listen normally on 3 eth0 172.16.0.30:123
1970-01-01T00:01:49 ntpd[249]: IO: Listen normally on 4 lo [::1]:123
1970-01-01T00:01:49 ntpd[249]: IO: Listen normally on 5 eth0 [fe80::ba27:ebff:fea6:340%2]:123
1970-01-01T00:01:49 ntpd[249]: IO: Listening on routing socket on fd #22 for interface updates
1970-01-01T00:01:50 ntpd[249]: SYNC: Found 10 servers, suggest minsane at least 3
1970-01-01T00:01:50 ntpd[249]: INIT: MRU 10922 entries, 13 hash bits, 65536 bytes
1970-01-01T00:01:50 ntpd[249]: statistics directory /var/NTP/ does not exist or is unwriteable, error No such file or directory
1970-01-01T00:01:51 ntpd[249]: DNS: dns_probe: 0.pool.ntp.org, cast_flags:8, flags:101
Segmentation fault (core dumped)
$ ./host/bin/aarch64-buildroot-linux-uclibc-gdb ./build/ntpsec-1_2_0/build/main/ntpd/ntpd core
Core was generated by `/usr/sbin/ntpd -n -d'.
Program terminated with signal SIGSEGV, Segmentation fault.
(gdb) where
#0 0x0000007f8ff1f150 in res_sync_func () at libc/inet/resolv.c:3356
#1 0x0000007f8ff1c468 in __open_nameservers () at libc/inet/resolv.c:949
#2 0x0000007f8ff1b498 in __dns_lookup (name=0x55943c67f0 "0.pool.ntp.org",
type=1, outpacket=0x7f8fe91c48, a=0x7f8fe91c08) at libc/inet/resolv.c:1134
#3 0x0000007f8ff1d744 in __GI_gethostbyname_r (
name=0x55943c67f0 "0.pool.ntp.org", result_buf=0x7f8fe92628,
buf=0x7f8fe91d90 "", buflen=992, result=0x7f8fe92670,
h_errnop=0x7f8fe92668) at libc/inet/resolv.c:1966
#4 0x0000007f8ff1d9a0 in __GI_gethostbyname2_r (
name=0x55943c67f0 "0.pool.ntp.org", family=2, result_buf=0x7f8fe92628,
buf=0x7f8fe91d70 "0.pool.ntp.org", buflen=1024, result=0x7f8fe92670,
h_errnop=0x7f8fe92668) at libc/inet/resolv.c:2065
#5 0x0000007f8ff16924 in gaih_inet (name=0x55943c67f0 "0.pool.ntp.org",
service=0x7f8fe92828, req=0x7f8fe92890, pai=0x7f8fe92838)
at libc/inet/getaddrinfo.c:596
#6 0x0000007f8ff17624 in __GI_getaddrinfo (
name=0x55943c67f0 "0.pool.ntp.org",
service=0x5582eb8acd "\377H\213D$\bL\211\367H\213\260\270",
hints=0x7f8fe92890, pai=0x5582ee1bf8) at libc/inet/getaddrinfo.c:957
#7 0x0000005582ea60f4 in _start ()
(gdb) p _res
$1 = {options = 0, nsaddr_list = {{sin_family = 0, sin_port = 0, sin_addr = {
s_addr = 0}, sin_zero = "\000\000\000\000\000\000\000"}, {
sin_family = 0, sin_port = 0, sin_addr = {s_addr = 0},
sin_zero = "\000\000\000\000\000\000\000"}, {sin_family = 0,
sin_port = 0, sin_addr = {s_addr = 0},
sin_zero = "\000\000\000\000\000\000\000"}}, dnsrch = {0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0}, nscount = 0 '\000', ndots = 0 '\000',
retrans = 0 '\000', retry = 0 '\000', defdname = '\000' <repeats 255 times>,
nsort = 0 '\000', pfcode = 0, id = 0, res_h_errno = 0, sort_list = {{addr = {
s_addr = 0}, mask = 0}, {addr = {s_addr = 0}, mask = 0}, {addr = {
s_addr = 0}, mask = 0}, {addr = {s_addr = 0}, mask = 0}, {addr = {
s_addr = 0}, mask = 0}, {addr = {s_addr = 0}, mask = 0}, {addr = {
s_addr = 0}, mask = 0}, {addr = {s_addr = 0}, mask = 0}, {addr = {
s_addr = 0}, mask = 0}, {addr = {s_addr = 0}, mask = 0}}, _u = {
_ext = {nsaddrs = {0x0, 0x0, 0x0}, nscount = 0 '\000', nstimes = {0, 0,
0}, nssocks = {0, 0, 0}, nscount6 = 0, nsinit = 0}}}
(gdb) p &_res
$2 = (struct __res_state *) 0x7f8ff8fd98 <_res>
(gdb) p rp
$3 = (struct __res_state *) 0x7fffffffff
And the following uclibc code at libc/inet/resolv.c:3356:
3345 static void res_sync_func(void)
3346 {
3347 struct __res_state *rp = &(_res);
3348 int n;
3349
3350 /* If we didn't get malloc failure earlier... */
3351 if (__nameserver != (void*) &__local_nameserver) {
3352 /* TODO:
3353 * if (__nameservers < rp->nscount) - try to grow __nameserver[]?
3354 */
3355 #ifdef __UCLIBC_HAS_IPV6__
3356 if (__nameservers > rp->_u._ext.nscount)
3357 __nameservers = rp->_u._ext.nscount;
3358 n = __nameservers;
The special thing about ntpsec is the DNS lookup in an extra thread
and/or the call to res_init(), see ntpsec-1_2_0/ntpd/ntp_dns.c:
69 msyslog(LOG_INFO, "DNS: dns_probe: %s, cast_flags:%x, flags:%x%s",
70 hostname, pp->cast_flags, pp->cfg.flags, busy);
71 if (NULL != active) /* normally redundant */
72 return false;
73
74 active = pp;
75
76 sigfillset(&block_mask);
77 pthread_sigmask(SIG_BLOCK, &block_mask, &saved_sig_mask);
78 rc = pthread_create(&worker, NULL, dns_lookup, pp);
and
165 static void* dns_lookup(void* arg)
166 {
167 struct peer *pp = (struct peer *) arg;
168 struct addrinfo hints;
169
170 #ifdef HAVE_SECCOMP_H
171 setup_SIGSYS_trap(); /* enable trap for this thread */
172 #endif
173
174 #ifdef HAVE_RES_INIT
175 /* Reload DNS servers from /etc/resolv.conf in case DHCP has updated it.
176 * We only need to do this occasionally, but it's not expensive
177 * and simpler to do it every time than it is to figure out when
178 * to do it.
179 * This res_init() covers NTS too.
180 */
181 res_init();
182 #endif
183
184 if (pp->cfg.flags & FLAG_NTS) {
185 #ifndef DISABLE_NTS
186 nts_probe(pp);
187 #endif
188 } else {
189 ZERO(hints);
190 hints.ai_protocol = IPPROTO_UDP;
191 hints.ai_socktype = SOCK_DGRAM;
192 hints.ai_family = AF(&pp->srcadr);
193 gai_rc = getaddrinfo(pp->hostname, NTP_PORTA, &hints, &answer);
194 }
$ /usr/lib/uclibc-ng-test/test/inet/tst-res
Segmentation fault (core dumped)
$ ./host/bin/aarch64-buildroot-linux-uclibc-gdb ./build/uclibc-ng-test-0844445e7358eb10e716155b55b0fb23e88d644a/test/inet/tst-res core
Core was generated by `/usr/lib/uclibc-ng-test/test/inet/tst-res'.
Program terminated with signal SIGSEGV, Segmentation fault.
(gdb) where
#0 __GI___res_init () at libc/inet/resolv.c:3514
#1 0x0000005591e507e4 in main (argc=<optimized out>, argv=<optimized out>)
at tst-res.c:20
First reported here:
https://lore.kernel.org/buildroot/20211028230131.5f50d6e7@gmx.net/
https://www.mail-archive.com/devel@uclibc-ng.org/msg01085.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
|
|
|
|
… using the same rules glibc does
also call __hnbad in some places to check answers
|
|
they merely call dn_{comp,expand} slightly rearranging the arguments
Signed-off-by: mirabilos <mirabilos@evolvis.org>
|
|
Signed-off-by: mirabilos <mirabilos@evolvis.org>
|
|
Minimal-invasive change: just ifdeffing away the older code.
There is no reason to have two different sets of functions doing
the same thing, one used in half the code and another, doing less
escaping, in the other half; just use one.
Signed-off-by: mirabilos <mirabilos@evolvis.org>
|
|
default
This patch fixes segfault of all user space processes (including init, which caused a panic) on recent buildroot powerpc32 builds.
The issue has been reported by Romain Naour in this thread: https://mailman.uclibc-ng.org/pipermail/devel/2021-May/002068.html
Recent buildroot toolchain enables secure PLT in powerpc gcc.
The latter will then supply -msecure-plt to gas invocations by default.
Recent buildroot also enables PIE by defaults.
For the secure PLT to work in PIC, the r30 register needs to point to the GOT.
Old "bss plt" was just a one-instruction-wide PLT slot, pointed-to by a R_PPC_JMP_SLOT relocation, which was written on-the-fly to contain a branch instruction to the correct address. It therefore had to stay writable.
New secure PLT only contains read-only code which loads the branch address from the writable GOT.
Note: secure PLT without PIC does not need r30 to be set. Because offset between plt stub code and got is known at link-time. In this case the PLT entry looks like:
1009b3e0 <__uClibc_main@plt>:
1009b3e0: 3d 60 10 0e lis r11,4110
1009b3e4: 81 6b 03 74 lwz r11,884(r11)
1009b3e8: 7d 69 03 a6 mtctr r11
1009b3ec: 4e 80 04 20 bctr
Whereas secure PLT with PIC - offset between plt and got is unknown at link-time - looks like this:
000af800 <00000000.plt_pic32.__uClibc_main>:
af800: 81 7e 03 80 lwz r11,896(r30)
af804: 7d 69 03 a6 mtctr r11
af808: 4e 80 04 20 bctr
af80c: 60 00 00 00 nop
Signed-off-by: Yann Sionneau <yann@sionneau.net>
|
|
Since Linux 3.11, O_TMPFILE allows to create unnamed files that can be
linked later on. It is internally defined as (O_TMPFILE | O_DIRECTORY)
to make it fail on old kernels.
Copying definitions from glibc for O_TMPFILE is not enough to support
O_TMPFILE; The open() wrapper also need to pass the mode when the flag
contains O_TMPFILE, otherwise, it will pass mode 000 which will succeed
but yield unexpected results.
openat() is curiously not affected since it passes the mode
unconditionally..
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
|
|
The F_DUPFD_CLOEXEC flag was added in POSIX 2008.09.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
|
|
|
|
|
|
Building uclibc 1.0.37 for SuperH architecture with linux-headers 5.10.7
fails at libpthread level due to missing time-related data structures,
usually defined by the kernel.
Define those missing data structures in SuperH-specific kernel_types.h.
Context: building for sh4eb-r2d[1] and sh4-r2d[1] boards emulations for
QEMU using the buildroot image generation tool.
Regarding the issue, a patch[3] was already issued in the kernel some
time ago, which aimed to solve precisely this problem. After coming up
with a quick and dirty patch for buildroot modifying Linux headers[4],
some discussion was sparked on the subject with Linux folks[5]. Some
analyzing later, conclusion was that:
1) Previously mentioned patch[4] was fixing the symptom, not the ill
2) SuperH-specific code in uclibc could be patched instead, to solve
the problem for other use cases (e.g. building just a toolchain)
[1] https://git.buildroot.net/buildroot/tree/configs/qemu_sh4eb_r2d_defconfig?h=2020.02.9
[2] https://git.buildroot.net/buildroot/tree/configs/qemu_sh4_r2d_defconfig?h=2020.02.9
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fc94cf2092c7c1267fa2deb8388d624f50eba808
[4] https://git.buildroot.net/buildroot/commit/?id=742f37de8d0e3797698411dfc6a63bd7e98aafe2
[5] https://patchwork.kernel.org/project/linux-sh/patch/20210123165652.10884-1-geoffrey.legourrierec@gmail.com/
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
|
|
malloc-simple allocator
Two things are fixed by this commit:
1/ It is wrong to allocate an object of size > PTRDIFF_MAX.
It is explained in this thread: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63303
2/ There was a possible integer overflow in both malloc() and memalign() implementations
of stdlib/malloc-simple.
The malloc() integer overflow issue is fixed by the side effect of fixing the PTRDIFF_MAX issue.
The memalign() one is fixed by adding a comparison.
Signed-off-by: Yann Sionneau <yann@sionneau.net>
|
|
Previous implementation was respecting the man page description
of what the function should do.
Also the function does not seem to be defined by POSIX.
But... to be really useful the function needs to handle
option matching and not just substring matching.
This is copy pasted from glibc.
This fixes issue reported by https://github.com/wbx-github/uclibc-ng/issues/8
that can happen for instance there: https://github.com/frida/glib/blob/master/gio/gunixmounts.c#L622
Signed-off-by: Yann Sionneau <yann@sionneau.net>
|
|
This commit adds support for Kalray VLIW family (kvx)
Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the
third of the KV family has the following features:
32/64 bits execution mode
6-issue VLIW architecture
64 x 64bits general purpose registers
SIMD instructions
little-endian
In order to build a usable toolchain, build scripts are provided at the
following address: https://github.com/kalray/build-scripts.
Kalray uses FOSS which is available at https://github.com/kalray
This includes Linux kernel, uClibc-ng, gcc, binutils, etc.
Signed-off-by: Clément Léger <cleger@kalray.eu>
Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu>
Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu>
Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu>
Signed-off-by: Marius Gligor <mgligor@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Fixes this:
libc/string/generic/strlen.c: In function 'strlen':
libc/string/generic/strlen.c:31:31: warning: variable 'magic_bits' set but not used [-Wunused-but-set-variable]
unsigned long int longword, magic_bits, himagic, lomagic;
^~~~~~~~~~
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Fixes this:
libc/misc/internals/tempname.c: In function 'brain_damaged_fillrand':
libc/misc/internals/tempname.c:155:0: warning: "L" redefined
#define L ((UINT32_MAX % NUM_LETTERS + 1) % NUM_LETTERS)
In file included from ./libpthread/nptl/sysdeps/unix/sysv/linux/lowlevellock.h:24:0,
from ./include/bits/libc-lock.h:35,
from ./include/bits/stdio-lock.h:22,
from ./include/bits/uClibc_mutex.h:73,
from ./include/bits/uClibc_stdio.h:83,
from ./include/stdio.h:71,
from libc/misc/internals/tempname.c:35:
./libc/sysdeps/linux/kvx/sysdep.h:40:0: note: this is the location of the previous definition
# define L(name) $L##name
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Fixes this:
In file included from libc/misc/fnmatch/fnmatch.c:235:0:
libc/misc/fnmatch/fnmatch_loop.c: In function 'internal_fnmatch':
libc/misc/fnmatch/fnmatch_loop.c:207:21: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
CHAR *p_init = p;
^
libc/misc/fnmatch/fnmatch_loop.c:208:21: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
CHAR *n_init = n;
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Signed-off-by: akater <nuclearspace@gmail.com>
|
|
Kernel stat/stat64 structure and uClibc-ng ones were not
in sync regarding the timespec fields.
Kernel had them but uClibc did not expose it in some cases.
Man page says that stat struct should have timespec fields if:
* _POSIX_C_SOURCE is defined to 200809L or greater
or
* _XOPEN_SOURCE is defined to 700 or greater
or
* _BSD_SOURCE is defined
or
* _SVID_SOURCE is defined
In the case of buildroot vim build, neither _BSD_SOURCE nor _SVID_SOURCE were defined.
Only _POSIX_C_SOURCE and _XOPEN_SOURCE were defined.
uClibc-ng header only checked for _BSD_SOURCE and _SVID_SOURCE via __USE_MISC.
This patch adds a check to __USE_XOPEN2K8 which is defined
if _POSIX_C_SOURCE >= 200809L or _XOPEN_SOURCE >= 700
This for instance fixes a crash at startup of vim (not the busybox one) on aarch64 and all other
arch where in kernel STAT_HAVE_NSEC is set and where stat.h in uClibc-ng comes from libc/sysdeps/linux/common-generic/bits
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
This reverts commit 5b58a1ebd89a4f05778441814e81817c82193fa3.
This breaks all static builds earlier to gcc 10 :(
Bad testing on my side.
|
|
copied from musl 1.2.1.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
|
|
Always use the systemcall as uClibc-ng has no vdso support.
Tested with libffi and python in qemu-system-riscv64.
|
|
Reported-By: akater <nuclearspace@gmail.com>
|
|
Starting with GCC-10 multiple definitions of global variables by will be
rejected.
https://gcc.gnu.org/gcc-10/porting_to.html
This fixes multiple definitions of _dl_pagesize and _dl_tls_static_size
while attempting static linking.
Of course this only occurs when compiling something that requires these
symbols.
First patch submission so hopefully all done correctly.
thanks,
Lance Fredrickson
From e0686f7c03ce8e51ccffefeb6365e50311e6dd10 Mon Sep 17 00:00:00 2001
From: lancethepants <lancethepants@gmail.com>
Date: Wed, 15 Jul 2020 13:09:26 -0600
Subject: [PATCH] Starting with GCC-10 multiple definitions of global variables
by will be rejected. This fixes multiple definitions of _dl_pagesize and
_dl_tls_static_size while attempting static linking.
|
|
Add XCHAL definitions for S32C1I and EXCLUSIVE options to
xtensa-config.h, include it in places that implement atomic operations
and add implementations with exclusive access option opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Replace "a" constraints with "+m" to avoid forcing atomic variable
address into a register and let the compiler use non-zero offset in
load/store opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
