Age | Commit message (Collapse) | Author |
|
* origin/master:
arm: fix the static link problem for ARM due to undefined __tls_get_addr
nios2: Name architecture correctly in endian.h header
nptl/mips64: Fix build when using mips64 and ABIs other than o32
mips: avoid segmentation fault when RLD_MAP is 0
libc: fix linker script generation for libubacktrace.so
stdio: fix diagnostic message
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Nios II is not i386 :-)
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* origin/master:
bump version to 0.9.32-rc2-git
release 0.9.32-rc2
nptl: Fix __USER_LABEL_PREFIX__ concatenatio
nptl: fix start_thread() for _STACK_GROWS_UP
ldso: get rid of _dl_lookup_hash
Add protected symbols support for all architectures
Revert "ldso/arm: Correct protected symbol resolution"
Revert "ldso_sh: add support for protected symbols to SH"
Revert "ldso/i386: support protected symbols"
cris: Fix build issues
syslog: fix 'everyone logs with user facility'
__psfs_parse_spec: always use long int for %p
buildsys: headers target should not depend on sysnum.h
buildsys: fix make release target
nptl: get rid of the last preprocessor warning when __ASSUME_TGKILL is not defined
remove uClibc_ctype.h if !LOCALE
Revert "Makefile.in: Add header to 'all' target"
nptl: get rid of preprocessor warning when __ASSUME_TGKILL is not defined
Conflicts:
ldso/include/dl-hash.h
ldso/ldso/arm/elfinterp.c
ldso/ldso/avr32/elfinterp.c
ldso/ldso/bfin/elfinterp.c
ldso/ldso/cris/elfinterp.c
ldso/ldso/dl-hash.c
ldso/ldso/i386/elfinterp.c
ldso/ldso/m68k/elfinterp.c
ldso/ldso/mips/elfinterp.c
ldso/ldso/powerpc/elfinterp.c
ldso/ldso/sh/elfinterp.c
ldso/ldso/sh64/elfinterp.c
ldso/ldso/sparc/elfinterp.c
ldso/ldso/x86_64/elfinterp.c
ldso/ldso/xtensa/elfinterp.c
ldso/libdl/libdl.c
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
harmless copy'n paste error in #error
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Thanks Waldemar Brodkorb for reporting
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
It's been found that on uclibc-based system most of the programs log with
'user' facility despite the calls to openlog() with other facilities explicitly
set. Most but not all. Investigating that I've found that the ones logging with
proper facilities used LOG_NDELAY in openlog(). The problem is that LogFacility
is overwritten in openlog_intern and LOG_USER is passed to it from vsyslog() no
matter what the program set with openlog().
Signed-off-by: Roman I Khimov <khimov@altell.ru>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
closes bug #3037
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
To compile the quad float emulation library gcc needs
__LONG_DOUBLE_128__ macro defined. Check first, if not
supported then revert to the qp_ops.c stubs
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* libc/sysdeps/linux/sh/sysdep.h: Add LOCAL macro
* libm/sh/sh4/Makefile.arch: Include asm source in the build
* libm/sh/sh4/s_lrintf.S [NEW]: optimised asm lrintf
* libm/sh/sh4/s_lroundf.S [NEW]: optimised asm lroundf
Signed-off-by: Christian Bruel <christian.bruel@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Instead of emitting a warning even when compiling for SH4, stop
compilation with an #error directive when not on SH4 core.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
This patch fixes a bug in the memcpy that doesn't save/restore
the FR12-FR15 registers (callee save registers in ST40 ABI) while
copying many cache lines with FPU in single paired precision mode
and by using all FPU registers (DR and XD).
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
|
|
strtoq should always return a quad_t and be an alias of strtol on
64 bit and strtoll on 32 bit.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Conflicts:
ldso/include/dl-hash.h
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
On x86_64, when WORDSIZE_COMPAT32 is enabled, the ut_tv field
of 'struct utmp' and 'struct utmpx' are defined as two nested structs
instead of being defined as 'struct timeval', so it is not possible to
directly assign the two ut_tv values.
This patch split the assignment by setting each fields (tv_sec, tv_usec)
of the ut_tv filed separately
It is als compatible with 'struct timeval' usage.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
about implicit declaration of memset in system()
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Patch attached:
Fix a bug in offset calculations when parsing /etc/hosts in resolv.c.
Formerly a miscalculation meant that having found the correct line, the code
was trashing its own result data.
Signed-off-by: Philip Nye <philipn@engarts.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Sparc-Gcc generates q_xxx intrinsic calls for quad float ("long double")
code. The routines from glibc's glibc-2.9/sysdeps/sparc/sparc32/soft-fp/*
where taken and ported to uclibc.
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Fix Microblaze config and makefiles.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Header files needed to build linuxthreads.old for microblaze.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Port optimized memcpy/memmove from the kernel.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Other header files for uClibc compilation.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Sync kernel header definitions with those used in recent mainline kernels.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Software floating point for microblaze.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix the microblaze vfork() and clone() implementations.
Add support for clone2().
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix the microblaze syscall interface.
Recent mainline kernels no longer carry userland code to invoke syscalls
and microblaze can use the uClibc generic code.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Rework crt bootstrap to work with the new __uClibc_main(),
and hardwire crt init/fini code since the awk approach to generating it on
the fly doesn't work for microblaze. The output from the gcc 4.1.2 compiler
is scrambled so that the tags expected by the awk script to bracket the
init/fini entry and exit code no longer do.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Some state and registers are missing from setjmp/longjmp handling.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
An architecture that _may_ have a MMU (and thus implements
the msync syscall), but for which the kernel and uClibc are built as
noMMU, we have a stub for msync.
Thanks to Steven J. Magnani for noticing.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If there was an error during syscall then after it's completion a3
register holds a non-zero value and v0 holds an actual error code which
should be saved in errno. This can be achieved by calling
__syscall_error with the value from v0 as a parameter. So this value
should be stored in a0, but the appropriate assembly instructions are
missing. Fixed this now by adding "move a0, v0".
I think it was once fixed by 58c5f8ba4cdf62342d05a546d15404cbbb3c4e07
but then something went wrong. Again...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
text data bss dec hex filename
- 318 4 0 322 142 libc/pwd_grp/lckpwdf.o
+ 312 4 0 316 13c libc/pwd_grp/lckpwdf.o
- 166 0 1 167 a7 libc/stdlib/abort.o
+ 157 0 1 158 9e libc/stdlib/abort.o
- 42 0 0 42 2a libc/sysdeps/linux/common/pause.o
+ 27 0 0 27 1b libc/sysdeps/linux/common/pause.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
...or rather, it WILL BE code shrink when gcc become clever enough
to not emit a second, useless XORing of ebx:
31 db xor %ebx,%ebx
85 c0 test %eax,%eax
74 11 je 73 <__GI_sleep+0x73>
31 db xor %ebx,%ebx <=== ?!
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
__USE_EXTERN_INLINES was unused and had bit-rotted, had to fix it
when it didn't work as intended at first.
text data bss dec hex filename
- 168 0 0 168 a8 libc/unistd/sleep.o
+ 146 0 0 146 92 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
text data bss dec hex filename
- 197 0 0 197 c5 libc/unistd/sleep.o
+ 168 0 0 168 a8 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
It can be easily reconstructed, since it's obvious
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Use less stack by using same "sigset_t set" object for new and saved
signal set, remove redundant clearing of set, and do not save/restore
errno around sigprocmask(SIG_SETMASK) - it never changes it.
While at it, improve comments and make code style consistent
across sleep.c file.
text data bss dec hex filename
- 242 0 0 242 f2 libc/unistd/sleep.o
+ 197 0 0 197 c5 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
No code changes according to objdump.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
objdump confirms that I did not mess it up.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Example:
--ppfs->maxposarg;
Verified with objdump that no code is changed
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
God knows this file is hard to read as-is, some readability improvement
is in order.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|