summaryrefslogtreecommitdiff
path: root/libc/sysdeps
AgeCommit message (Collapse)Author
2023-09-28riscv64: define __NR_riscv_flush_icache if not availableWaldemar Brodkorb
2023-09-15fork: generate stub on no-MMU systemsBen Wolsieffer
fork() can be implemented using either the fork or clone syscalls on MMU systems. Therefore the stub is only generated if neither __NR_fork nor __NR_clone are defined. The stub code manually undefines __NR_fork on no-MMU systems in an attempt to enable the stub, but this doesn't work because __NR_clone is still defined. It is not appropriate to undefine __NR_clone because clone is available on no-MMU, it is just not capable of implementing fork. This patch directly enables the fork stub if __ARCH_USE_MMU__ is not defined. This eliminates the need to undefine __NR_fork, so this code is removed Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
2023-09-14kvx: fix asm syntaxPaul Iannetta
Previously kvx assembler considered all separators (",", "?", "=", "[]") to be the same, this is not the case anymore hence we need to fix all the misformed assembly. Signed-off-by: Paul Iannetta <piannetta@kalray.eu> Acked-by: Yann Sionneau <ysionneau@kalray.eu> Tested-by: Yann Sionneau <ysionneau@kalray.eu> Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2023-09-14kvx: use a custom stat.h headerYann Sionneau
Use a custom stat.h header for kvx arch. This makes sure it is aligned with Linux kernel one. Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2023-09-14kvx: define that kvx port supports statx syscallYann Sionneau
Define that kvx Linux port supports statx syscall. Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2023-09-14kvx: align specification of user regsYann Sionneau
Align the specification of the ptrace interface with how it is specified on RISC-V. Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2023-09-14kvx: atomic: rework using compiler builtinsYann Sionneau
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2023-09-14fstatat: add wrapper that uses statx for non-legacy archYann Sionneau
Add fstatat wrapper that uses statx for non-legacy arch. This allows non-legacy arch to opt-out from defining the old stat* syscalls by not defining __ARCH_WANT_NEW_STAT in their arch/xxx/include/asm/unistd.h Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2023-09-14add support for systems without legacy setrlimit/getrlimit syscallsYann Sionneau
Those must have the recent prlimit64 syscall which exists since Linux 3.2. This patch is necessary for non-legacy architectures that wish to remove support for legacy setrlimit/getrlimit syscalls. The non-legacy arch are those who opt-out via non defining __ARCH_WANT_SET_GET_RLIMIT in their arch/xxx/include/uapi/asm/unistd.h setrlimit and getrlimit are then emulated via the new prlimit64 syscall. Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2023-09-14fstat: add missing return value statement for the statx wrapping caseYann Sionneau
Add missing return value statement to fstat for the statx wrapping case. Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2023-09-14fstatat64: define it as a wrapper of statx if the kernel does not support ↵Yann Sionneau
fstatat64 syscall Define fstatat64 as a wrapper of statx if the kernel does not support fstatat64 syscall This is the case for non-legacy architectures that don't define __ARCH_WANT_NEW_STAT in their linux arch/xxx/include/asm/unistd.h Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2023-08-14gettimeofday() only include ldso.h if vdso support is activatedlordrasmus
2023-08-14c6x compile fix vdso supportlordrasmus
2023-08-12arm: add hwcap header fileWaldemar Brodkorb
2023-08-09fcntl.h: declare f_owner_ex for all architecturesWaldemar Brodkorb
2023-08-08aarch64: add hwcap header fileWaldemar Brodkorb
2023-08-06powerpc: fix conflicting definitions with newer Linux kernelWaldemar Brodkorb
2023-08-02add missing wchar.h, fixes a compile error with openadkWaldemar Brodkorb
2023-07-14[PATCH] libc/sysdeps/linux/common/bits/wchar.h: resync with glibc, fix build ↵Waldemar Brodkorb
issue with gcc 12 The current definition of __WCHAR_MIN and __WCHAR_MAX are only correct when wchar_t is an int. This is not the case on ARM/AArch64 where wchar_t is an unsigned int, or some other architectures where wchar_t is a long. The current incorrect definition causes a build issue for example when building mpd, which uses boost, with gcc 12.x: In file included from /home/thomas/buildroot/aarch64/host/aarch64-buildroot-linux-uclibc/sysroot/usr/include/boost/integer.hpp:20, from /home/thomas/buildroot/aarch64/host/aarch64-buildroot-linux-uclibc/sysroot/usr/include/boost/crc.hpp:42, from ../src/storage/StorageState.cxx:43: /home/thomas/buildroot/aarch64/host/aarch64-buildroot-linux-uclibc/sysroot/usr/include/boost/integer_traits.hpp:105:69: error: narrowing conversion of ‘-2147483648’ from ‘int’ to ‘wchar_t’ [-Wnarrowing] 105 | public detail::integer_traits_base<wchar_t, WCHAR_MIN, WCHAR_MAX> | ^ This issue was fixed in glibc in 2013, see bug report https://sourceware.org/bugzilla/show_bug.cgi?id=15036, and upstream commit https://sourceware.org/git/?p=glibc.git;a=commit;h=052aff95782fefe9c63566471063e8b20836bfb8. Since the i386-specific definition of __WCHAR_MIN and __WCHAR_MAX was also removed at the same time in glibc, we do the same as part of this commit. Reported-by: Clément Ramirez <clement.ramirez@bootlin.com> With-some-useful-help-from: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-05-10gettimeofday: fix static buildWaldemar Brodkorb
2023-03-13Emulate 'futimesat' when __NR_futimesat is not available.Elliot Thomas
2023-02-03riscv64: fix linking with binutils 2.40Waldemar Brodkorb
See here for details: https://sourceware.org/bugzilla/show_bug.cgi?id=28509
2023-01-22Defined MAP_FIXED_NOREPLACElinted
Added definition for MAP_FIXED_NOREPLACE which was added in kernel 4.17 Signed-off-by: linted <linted@users.noreply.github.com>
2022-12-19gettimeofday() vdso supportramin
2022-12-19sycall macro for vdso supportramin
2022-11-20RISC-V 32-bit supportustcymgu@gmail.com
Added 32-bit RISC-V support. I have managed to get 32-bit RISC-V No-MMU Linux running based on mainstream buildroot. It's nice to have uclibc support this 32-bit No-MMU target. There's no substantial code change except definations and config options. Signed-off-by: Yimin Gu <ustcymgu@gmail.com>
2022-10-14Static pie support for ppclinted
Modified config files and crt1.S to support static pie elf generation. Signed-off-by: linted <linted@users.noreply.github.com>
2022-10-14arc: add optimized string functions for ARCv3Pavel Kozlov
Add ability to use optimized versions of string functions for ARCv3 32-bit CPUs with UCLIBC_HAS_STRING_ARCH_OPT option. Add optimized memcpy/memset/memcmp code for ARCv3 CPUs based on the code from newlib and adapt for ARCv3 existed optimized strchr/strcmp/strcpy/strlen. Link to the Synopsys newlib repo with code for ARCv3 on GitHub: https://github.com/foss-for-synopsys-dwc-arc-processors/newlib Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
2022-09-27arc: add support for ARCv3 32-bit processorsSergey Matyukevich
New ARCv3 ISA includes both 64-bit and 32-bit CPU family. This patch adds support for 32-bit ARCv3 HS5x processors. Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
2022-09-27arc: add asm macrosSergey Matyukevich
Add a header file with assembler macros to be able to handle in one place the differences between ARCv2 and ARCv3 ISAs. It is a preparatory step before the introduction of support for ARCv3 CPUs. Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
2022-09-21xtensa: add static pie supportMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-09-07Added support for creation of Static Position-Independent Executables (PIE) ↵linted
on mips Updated config to allow compilation of rcrt1.o for mips and modified it's crt1.S to perform relocates in __start. The mips architecture performs relocations differently then most other architectures. reloc_static_pie was rewritten, taking code from dl-startup.c, in order to perfrom the additional relocations. Modifications were made to mips' dl-startup.h to allow for the use of contained macros without including _start definition. Signed-off-by: linted <linted@users.noreply.github.com>
2022-08-08Added support for creation of Static Position-Independent Executables (PIE) ↵linted
on aarch64 Updated config to allow compilation of rcrt1.o for aarch64 and modified it's crt1.S to relocate dynamic section prior to __uClibc_main. Disabled stack protector when compiling reloc_static_pie.c to avoid TLS access prior to it being setup. Signed-off-by: linted <linted@users.noreply.github.com>
2022-08-08resource.h: add missing RUSAGE_THREADWaldemar Brodkorb
There is a real-world usage of RUSAGE_THREAD by the pistache project, https://github.com/oktal/pistache. Reported-By: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-07-26Added support for creation of Static Position-Independent Executables (PIE) ↵linted
on i386, x86_64, and arm. This patch adds the generation of rcrt1.o which is used by gcc when compiling with the --static-pie flag. rcrt1.o differs from crt1.o and Scrt1.o in that it the executable has a dynamic section but no relocations have been performed prior to _start being called. crt1.o assumes there to be no dynamic relocations, and Scrt1.o has all relocations performed prior to execution by lsdo. The new reloc_static_pie function handles parsing the dynamic section, and performing the relocations in a architecture agnostic method. It also sets _dl_load_base which is used when initalizing TLS to ensure loading from the proper location. This allows for easier porting of static-pie support to additional architectures as only modifications to crt1.S to find the load address are required. Signed-off-by: linted <linted@users.noreply.github.com>
2022-06-20xtensa: implement user context manipulation functionsMax Filippov
Implement getcontext, makecontext, setcontext and swapcontext. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-05-20define RLIMIT_RTTIME, bump RLIMIT_NLIMITSRomain Naour
This macro exists since Linux 2.6.25 [1] and is defined in glibc since 2.14 [2] for sparc and most supported architectures. RLIMIT_RTTIME has been added later for mips [3] and alpha [4]. For example, RLIMIT_RTTIME is needed to build qemu 7.0.0 with Linux user-land emulation support [5]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=78f2c7db6068fd6ef75b8c120f04a388848eacb5 [2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=67f86a251e0d36107fe28999281d46e76941c7b9 [3] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=8969f4df1a526aa60dd0bc1c4736cf02104d4a05 [4] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=53c2cb7641bd866398156625ef672bbd2d78a0d8 [5] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=244fd08323088db73590ff2317dfe86f810b51d7 Signed-off-by: Romain Naour <romain.naour@gmail.com>
2022-02-27guard prlimit, reported by Lance FredricksonWaldemar Brodkorb
2022-01-28sched.h: Add SCHED_DEADLINEPetr Vorel
Defined in kernel v3.14, commit aab03e05e8f7 ("sched/deadline: Add SCHED_DEADLINE structures & implementation") Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
2022-01-21add prlimit syscall wrapper, now for realWaldemar Brodkorb
2022-01-21add prlimit syscall wrapperWaldemar Brodkorb
2022-01-21nds32: sync with binutils 2.37, gcc 11.2 and linux 5.10.93 changesWaldemar Brodkorb
2022-01-10arc: fix signal handler restorerSergey Matyukevich
When MD_FALLBACK_FRAME_STATE_FOR handler in libgcc unwind code checks the second instruction opcode in __default_rt_sa_restorer function, it expects to see the following values for ARC cores: - 0x7ee0781e for ARCv2 LE - 0x003f226f for ARC700 LE ARC700 value correspond to trap0 instruction. ARCv2 value corresponds to the following code: traps_0 j_s [blink] However, unlike glibc, uClibc implementation of __default_rt_sa_restorer for ARC does not have that jump. Hence libgcc unwind code is not able to recognize signal frame correctly on ARCv2 and completes too early. This change fixes libgcc unwinding over signal frame on ARCv2 adding missing jump to __default_rt_sa_restorer. Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
2021-12-24Fix some warnings due to type issuesYann Sionneau
Fixes those two warnings: In file included from <command-line>: libc/sysdeps/linux/common/openat64.c:18:33: warning: 'openat64' alias between functions of incompatible types 'int(int, const char *, int, ...)' and 'int(int, const char *, int, mode_t)' {aka 'int(int, const char *, int, unsigned int)'} [-Wattribute-alias=] 18 | strong_alias_untyped(__openat64,openat64) | ^~~~~~~~ ./include/libc-symbols.h:177:31: note: in definition of macro '_strong_alias_untyped' 177 | extern __typeof (aliasname) aliasname __attribute__ ((alias (#name))) __attribute_copy__ (name); | ^~~~~~~~~ libc/sysdeps/linux/common/openat64.c:18:1: note: in expansion of macro 'strong_alias_untyped' 18 | strong_alias_untyped(__openat64,openat64) | ^~~~~~~~~~~~~~~~~~~~ libc/sysdeps/linux/common/openat64.c:14:12: note: aliased declaration here 14 | static int __openat64(int fd, const char *file, int oflag, mode_t mode) | ^~~~~~~~~~ and CC libc/sysdeps/linux/common/stat.os libc/sysdeps/linux/common/stat.c: In function 'stat': libc/sysdeps/linux/common/stat.c:28:40: warning: passing argument 3 of 'fstatat64' from incompatible pointer type [-Wincompatible-pointer-types] 28 | return fstatat64(AT_FDCWD, file_name, buf, 0); | ^~~ | | | struct stat * In file included from libc/sysdeps/linux/common/stat.c:11: ./include/sys/stat.h:258:35: note: expected 'struct stat64 * restrict' but argument is of type 'struct stat *' 258 | struct stat64 *__restrict __buf, int __flag) | ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~ Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2021-12-24kvx: fix warning about __BITS_PER_LONG not being definedYann Sionneau
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2021-06-04powerpc: fix PIE/PIC builds with newer gcc/binutils which use secureplt by ↵Yann Sionneau
default This patch fixes segfault of all user space processes (including init, which caused a panic) on recent buildroot powerpc32 builds. The issue has been reported by Romain Naour in this thread: https://mailman.uclibc-ng.org/pipermail/devel/2021-May/002068.html Recent buildroot toolchain enables secure PLT in powerpc gcc. The latter will then supply -msecure-plt to gas invocations by default. Recent buildroot also enables PIE by defaults. For the secure PLT to work in PIC, the r30 register needs to point to the GOT. Old "bss plt" was just a one-instruction-wide PLT slot, pointed-to by a R_PPC_JMP_SLOT relocation, which was written on-the-fly to contain a branch instruction to the correct address. It therefore had to stay writable. New secure PLT only contains read-only code which loads the branch address from the writable GOT. Note: secure PLT without PIC does not need r30 to be set. Because offset between plt stub code and got is known at link-time. In this case the PLT entry looks like: 1009b3e0 <__uClibc_main@plt>: 1009b3e0: 3d 60 10 0e lis r11,4110 1009b3e4: 81 6b 03 74 lwz r11,884(r11) 1009b3e8: 7d 69 03 a6 mtctr r11 1009b3ec: 4e 80 04 20 bctr Whereas secure PLT with PIC - offset between plt and got is unknown at link-time - looks like this: 000af800 <00000000.plt_pic32.__uClibc_main>: af800: 81 7e 03 80 lwz r11,896(r30) af804: 7d 69 03 a6 mtctr r11 af808: 4e 80 04 20 bctr af80c: 60 00 00 00 nop Signed-off-by: Yann Sionneau <yann@sionneau.net>
2021-04-09open: Add support for O_TMPFILENicolas Cavallari
Since Linux 3.11, O_TMPFILE allows to create unnamed files that can be linked later on. It is internally defined as (O_TMPFILE | O_DIRECTORY) to make it fail on old kernels. Copying definitions from glibc for O_TMPFILE is not enough to support O_TMPFILE; The open() wrapper also need to pass the mode when the flag contains O_TMPFILE, otherwise, it will pass mode 000 which will succeed but yield unexpected results. openat() is curiously not affected since it passes the mode unconditionally.. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
2021-02-19fcntl.h: Make F_DUPFD_CLOEXEC if _USE_XOPEN2K8Paul Cercueil
The F_DUPFD_CLOEXEC flag was added in POSIX 2008.09. Signed-off-by: Paul Cercueil <paul@crapouillou.net>
2021-01-28use renameat2 syscall, when renameat isn't availableWaldemar Brodkorb
2021-01-27fix umount2 compilation for alpha on Linux 5.xWaldemar Brodkorb
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 20:04:03 +0000