summaryrefslogtreecommitdiff
path: root/libc/sysdeps
AgeCommit message (Collapse)Author
2016-07-31deduplicate jmpbuf-unwind.hWaldemar Brodkorb
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-17cleanup CALL_MCOUNT / PROFWaldemar Brodkorb
As this is only implemented for a few architecture and not well tested, just remove it.
2016-07-17x86_64: remove dead code, SHARED is not defined when compilingWaldemar Brodkorb
2016-07-17cleanup PTR_MANGLE/PTR_DEMANGLE supportWaldemar Brodkorb
As this is only implemented for a few architecture and not well tested, just remove it. Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-17mips: add regdef.h glibc compatibility headerWaldemar Brodkorb
2016-07-03arm: cleanup redundant macros for syscallsWaldemar Brodkorb
In uClibc-ng the syscall macros are in bits/syscalls.h.
2016-06-30nds32: add support for new architectureWaldemar Brodkorb
Add support for Andes Technology NDS32 architecture. See here http://www.andestech.com/en/index/index.htm for more informaton. Verification of the port from an older uClibc port was done on a sponsored AG101p board. The testsuite only has 5 errors, three are related to an existing bug in dlclose() with LT.old, also happening on cris32 and m68k. Failures to fallocate/posix_fallocate are unresolved. Thanks to Andes Technology sponsoring the hardware and being very helpful while doing the uClibc-ng porting. Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-06-25bits/sigset.h: Fix _EXTERN_INLINE redefinitionLeonid Lisovskiy
Commit 251a3c19cb "sleep: employ __USE_EXTERN_INLINES (with necessary fixes)" introduces following problems: 1. __USE_EXTERN_INLINES forcibly enabled build fails ... LD libuClibc-1.0.15.so libc/libc_so.a(cmsg_nxthdr.os): In function `__GI___cmsg_nxthdr': cmsg_nxthdr.c:(.text.__GI___cmsg_nxthdr+0x0): multiple definition of `__GI___cmsg_nxthdr' libc/libc_so.a(close.os):close.c:(.text.__GI___cmsg_nxthdr+0x0): first defined here libc/libc_so.a(creat.os): In function `__GI___cmsg_nxthdr': creat.c:(.text.__GI___cmsg_nxthdr+0x0): multiple definition of `__GI___cmsg_nxthdr' libc/libc_so.a(close.os):close.c:(.text.__GI___cmsg_nxthdr+0x0): first defined here ... 2. libuargp wrongly contains __cmsg_nxthdr/__sigismember/__sigdelset/__sigaddset global symbols on platforms which includes signal.h from sys/procfs.h As result, static linking will fail: TEST_LINK argp/ bug-argp1 /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libc.a(sigsetops.os): In function `__GI___sigismember': sigsetops.c:(.text+0x0): multiple definition of `__sigismember' /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libuargp.a(argp-xinl.os):argp-xinl.c:(.text+0x0): first defined here /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libc.a(sigsetops.os): In function `__GI___sigaddset': sigsetops.c:(.text+0x28): multiple definition of `__sigaddset' /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libuargp.a(argp-xinl.os):argp-xinl.c:(.text+0x28): first defined here /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libc.a(sigsetops.os): In function `__GI___sigdelset': sigsetops.c:(.text+0x4c): multiple definition of `__sigdelset' /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libuargp.a(argp-xinl.os):argp-xinl.c:(.text+0x4c): first defined here We have to partially revert 251a3c19cb to fix problems above. It is safe to do this after commit 162cfaea20 *: inline constant __sig{add,del}set and __sigismember since we are able to use new inlines from within libc and leave the rest of world(__USE_EXTERN_INLINES) equal to glibc now. Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-06-23ARC: Enable shared crt1Vineet Gupta
Currently crt1 takes address of functions (main,_init,_fini) directly which doesn't generate truely position independent code, but zero based values instead. e.g. | __start: | ... | add_s r2,sp,0x4 | mov_s r0, main generates to | 000156ec <__start>: | ... | 156f4: add_s r2,sp,0x4 | 156f6: mov_s r0,0x15f7c | ... | 00015f7c <main>: | 15f7c: push_s blink This works just fine for the normal (non PIE) dynamic executables since they are loaded at address 0. However this is not true for PIE executables. So for Scrt1 we use a true position independent way when taking function addresses. Cc: uclibc@uclibc.org <uclibc@uclibc.org> Cc: devel@uclibc-ng.org <devel@uclibc-ng.org> Cc: Cupertino Miranda <cmiranda@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-06-23ARC: Implement .note.ABI-tag section in crt1.SAnton Kolesov
Linux Standard Base specifies section .note.ABI-tag that can be considered as a marker for ELF files targeted to Linux systems. See https://refspecs.linuxfoundation.org/LSB_1.2.0/gLSB/noteabitag.html This section, for example, is used by the GDB to identify Linux ELFs as compared to baremetal ELFs that do not have this section. Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
2016-06-19or1k: add dummy sys/user.h for straceWaldemar Brodkorb
2016-06-07ssp: remove SSP legacy codeWaldemar Brodkorb
Nobody should use gcc 3.3 nowadays.
2016-06-07microblaze: remove unused dead codeWaldemar Brodkorb
These files are not used, no regression found while running the testsuite.
2016-06-03ppc: cleanup unsupported ppc64 codeWaldemar Brodkorb
Remove ppc64 bits and bytes, as we don't support ppc64 and it makes the code more readable without the dead code.
2016-05-28sparc: remove unused 64 bit support codeWaldemar Brodkorb
2016-05-24microblaze: fix setjmp/longjmpWaldemar Brodkorb
Sync mostly with GNU libc implementation of setjmp/longjmp. Just generate PIC compatible code, so no difference for static builds are made. Add sysdep.h with some handy assembly macros used inside setjmp.S/__longjmp.S. This unbreaks dynamic linker support, first test suite run only shows 10 errors, which doesn't look so bad.
2016-05-18remove linuxthreads.new, rename linuxthreads.oldWaldemar Brodkorb
Linuxthreads.new isn't really useful with the existence of NPTL/TLS for well supported architectures. There is no reason to use LT.new for ARM/MIPS or other architectures supporting NPTL/TLS. It is not available for noMMU architectures like Blackfin or FR-V. To simplify the live of the few uClibc-ng developers, LT.new is removed and LT.old is renamed to LT. LINUXTHREADS_OLD -> UCLIBC_HAS_LINUXTHREADS
2016-04-26sparc: add deprecated context switching functionsWaldemar Brodkorb
Ported over from glibc mostly without changes. Lightly tested with mongrel2 in qemu-system-sparc.
2016-04-17remove unused defines for lm32/or1kWaldemar Brodkorb
2016-04-15replace FSF addresses with URLsNikola Forró
License notices in most of the source files refer to an outdated FSF address. Replace it with URL, like in the rest of the source files.Signed-off-by: Nikola Forró <nforro@redhat.com>
2016-04-11simplify getpagesize, do not depend on kernel macrosWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2016-03-31bits/byteswap-common.h: import recent headers from glibcAnthony G. Basile
On systems where uClibc doesn't provide an arch specific byteswap.h, we fall back on bits/byteswap-common.h. However, there is a bug in this header in the __bswap_constant_64(x) macro. If, for example, a double is passed, we get 'invalid operands to binary &' in which we mismatch a 'double' and 'long long unsigned int'. The newer glibc headers fix this and so we import them. Also, since the inclusion of byteswap.h is not appropriate for assembly code, we guard a portion of endian.h which uses byteswap.h from inclusion in any assembly. This is needed, for example, for f2fs-tools 1.6.0 on 32-bit big endian PowerPC. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2016-03-31arm: simplify handling of Thumb related optionsThomas Petazzoni
Currently, the Thumb support on ARM has three related Config.in options, which are not trivial for users to understand, and are in fact not needed: - The USE_BX option is not needed: knowing whether BX is available or not is easy. If you have an ARM > v4 or ARMv4T, then BX is available, otherwise it's not. This is the logic used in glibc. - The USE_LDREXSTREX option is not needed: whenever Thumb2 is available, ldrex/strex are available, so we can simply rely on __thumb2__ to determine whether ldrex/strex should be used, without requiring a Config.in option. - Once USE_BX and USE_LDREXSTREX are removed, the only thing left that COMPILE_IN_THUMB does is to set -mthumb. This makes the option unnecessary, as on ARM at least, the user is already supposed to pass -march=<foo> or other compiler options tuning the library for a specific ARM variant. There is no reason to do otherwise for Thumb, which allows to get rid of the COMPILE_IN_THUMB option. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-31xtensa: fix __sigsetjmp call12 caseMax Filippov
Register window saving loop in __sigsetjmp incorrectly calculates offset in the jmp_buf in case it was called with call12. The bug was introduced in commit f4b1b7ade7971141 "xtensa: fix setjmp that didn't save all registers correctly". Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-03-10ia64: sync with glibc headersWaldemar Brodkorb
2016-02-29arm: fix __JMP_BUF_SP definitionMax Filippov
__JMP_BUF_SP is the index of a stack pointer slot in the __jmp_buf. According to ARM __sigsetjmp code it does not depend on configuration parameter __UCLIBC_HAS_FPU__. Make its definition unconditional. __JMP_BUF_SP is used in the unwind_stop through the _JMPBUF_CFA_UNWINDS_ADJ macro, this change fixes cleanup routines call on thread cancellation in configurations with hard FP. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-02-24xtensa: fix stack unwinding over __default_sa_restorerMax Filippov
For some xtensa cores generated code gets arranged so that __default_sa_restorer immediately follows preceding function. E.g.: 40a1b: c03340 sub a3, a3, a4 40a1e: f01d retw.n 00040a20 <__default_sa_restorer>: 40a20: e1a022 movi a2, 225 40a23: 005000 syscall ... Contents of the .eh_frame section: ... 000007f4 00000014 000007f8 FDE cie=00000000 pc=0004076c..00040a20 DW_CFA_advance_loc4: 3 to 0004076f DW_CFA_def_cfa_offset: 48 Due to the way xtensa libgcc uw_frame_state_for calls _Unwind_Find_FDE for non-signal frames, FDE for the previous function is found during thread cancellation signal stack unwinding in that case. Signal stack frame is not recognized and is not unwound properly, breaking cleanup routines calling for cancelled thread. Insert padding before the __default_sa_restorer so that no FDE is found for it, MD_FALLBACK_FRAME_STATE_FOR is called by uw_frame_state_for and the frame is correctly recognized as signal frame. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-02-07frv: resurrect port somehow, totally untestedWaldemar Brodkorb
The FR-V port is really broken, and I have no emulator or hardware for this platform. I tried to get some hardware from RedHat, who made the FR-V port initially. Unfortunately Fujitsi didn't agreed to sent me some of their unused spare hardware lying @RedHat. As I invested some time to get stuff compiled, I decided to add the code and may be anytime later I can gain access to some emulator or hardware. GDB simulator for FR-V doesn't support booting Linux AFAIK.
2016-01-31mips: fix clashing symbolsWaldemar Brodkorb
ISC bind9 uses ptrsize, better use something else. Reported-By: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-01-31Provide __adjtimex() alias, like glibc.Leonid Lisovskiy
Althought recent versions of sofware don't require it, old ntpd wants - see http://bugs.ntp.org/show_bug.cgi?id=769 Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com> Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-01-30add exp10() from glibcWaldemar Brodkorb
Some software make use of exp10, so add it. Basic testing with LTP. Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-01-27nios2: allow to build toolchainWaldemar Brodkorb
At least allow to compile a toolchain targeting nios2 without MMU.
2016-01-25hppa: unbreak toolchain buildingWaldemar Brodkorb
At least allow to build a toolchain for hppa. Sync some headers with glibc.
2016-01-12Suppress warning "_GNU_SOURCE" redefinedWaldemar Brodkorb
libc/sysdeps/linux/common/euidaccess.c:1:1: warning: "_GNU_SOURCE" redefined In file included from <command-line>:0: ./include/libc-symbols.h:52:1: warning: this is the location of the previous definition Signed-Off-By: Leonid Lisovskiy <lly.dev@gmail.com>
2016-01-10h8300: O_DIRECT and O_DIRECTORY swapping.Yoshinori Sato
Different define of latest kernel. kernel define is #define O_DIRECT 00040000 /* direct disk access hint */ #define O_DIRECTORY 00200000 /* must be a directory */ Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-10Add implementation for copysignl for i386Waldemar Brodkorb
Patch from OpenWrt. Reported-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-01-10Provide XTI __t_scalar_t types, like glibcWaldemar Brodkorb
Reported-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-01-06Remove alias.Yoshinori Sato
open_cancel and open2_cancel have diffrent argument on open. So can't alias this functions. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-06openat argument fix.Yoshinori Sato
If argument passing to register case (ex. -mregparam=3). This case set all parameters set to register from caller. But callee refer to stack. So can't get parameter. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-06__ARCH_HAS_DEPRECATED_SYSCALLS__ case fix. getdents is deprecated.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-06h8300: vfork flags update.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-06extra/Configs/Config.in: add syncfs() to Linux-specific functionsAnthony G. Basile
syncfs() was recently added (commit dfa593d4d). But man sync(2) specifies that syncfs() is Linux-specific. This was overlooked in the original commit so we add it to the set of Linux-specific functions supported by uClibc. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2016-01-02lm32: fix testsuite compile problemsWaldemar Brodkorb
One test fails to compile with a gcc ICE, so disable it for now.
2016-01-02lm32: add missing typesWaldemar Brodkorb
2016-01-02remove deprecated architectures v850/i960Waldemar Brodkorb
Both architectures are more or less deprecated. No Linux upstream support, no gcc support for uClinux.
2016-01-01Add argp implementationSalvatore Cro
Argp is an advanced support for parsing unix-style argument vectors. In addition to the common getopt interface, it provides automatic response to `--help' and `--version' options and use of custom parser in conjunction with argp native option parser, among others. Argp support is required by elfutils package and prelink. In uClibc argp functionalities has been moved from C library to libuargp.so Further the libc.so linker script contains an AS_NEEDED entry so that it doesn't need to link libuargp.so explicitely. Disable argp test if feature disabled. Signed-off-by: Salvatore Cro <salvatore.cro@st.com> Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-01-01Fix "pselect: Use linux pselect6 syscall when available"Leonid Lisovskiy
Commit e3c3bf2b58 introduce use of pselect6, but has following disadvantages: * Use of userspace types in args67 structure - it breaks, for example, configs when 32-bit uClibc-ng compiled against 64-bit kernel. Syscall will always return EINVAL. We must use __kernel_* types and __SYSCALL_SIGSET_T_SIZE. * It have excess checks for NSEC_PER_SEC. Original code from select() implementation has struct timeval => struct timespec conversion, kernel select() syscall implementation do the same. But none of libc versions (glibc, eglibc, musl) I know, perform similar checks for pselect() - there is no structure fields conversions, just struct timespec through all the calls. To have such checks in uClibc-ng we need one example, at least. * It is possible to avoid extra userspace reads from kernel code if sigmask == NULL. I suggest to do it, for a few bytes cost. * Commit didn't add test case to testsuite. Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2015-12-29xtensa: fix vfork return address calculationsMax Filippov
vfork internally unwinds stack up one frame, saving the original return address in the a3 of the unwound frame. To do this in windowed ABI it needs to exchange two topmost bits of the original return address and of the helper entry point. Current code doesn't do it correctly for addresses above 0x40000000, resulting in illegal instruction exception for configurations that put code high, e.g. for noMMU. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-12-22pselect: Use linux pselect syscall when availableNicolas S. Dade
Linux has a pselect syscall since 2.6.something. Using it rather than emulating it with sigprocmask+select+sigprocmask is smaller code, and works properly. (The emulation has race conditions when unblocked signals arrive before or after the select) The tv.nsec >= 1E9 handling comes from uclibc's linux select() implementation, which itself uses pselect() internally if the pselect syscall exists. I though it would be good to do the same here. Note that although the libc pselect() API has 6 arguments, the linux kernel syscall as 7 arguments. There is an extra, somewhat vestigial, sizeof the signal mask argument. Signed-off-by: Nicolas S. Dade <nic.dade@gmail.com>
2015-12-22Do define some IPv6 related symbols even with IPv6 disabledWaldemar Brodkorb
Fixes compilation of some faulty applictions. Patch from Freetz.org Reported-by: Leonid Lisovskiy <lly.dev@gmail.com>