summaryrefslogtreecommitdiff
path: root/libc/sysdeps
AgeCommit message (Collapse)Author
2007-09-15pull from Blackfin repo: cleanup string funcsMike Frysinger
2007-09-15forgot to add this with previous sparc commit ...Mike Frysinger
2007-09-15use gcc input constraints to avoid often duplicated reloads when making syscallsMike Frysinger
2007-09-15if __NR__newselect and __NR_select are unavailable, fall back to __NR_pselect6Mike Frysinger
2007-09-15Blue Swirl writes:Mike Frysinger
I got the library to compile with the attached patches, though dynamic loader crashes early. In buildroot I changed the architecture name by hand from sparc to sparc64, otherwise the compiler produced 32-bit files with V9 (64-bit) instructions. This configuration is not supported by QEMU, so I aimed for pure 64-bit. I think Sparc64 option needs to be added to buildroot. The _Qp_ ops seem to be required by the ABI. This and setjmp patches are just hacks to get the compilation further. The _Qp_ ops can be found in glibc, would it be OK to use those? V9 assembler requires declarations for global register use. The mem* functions in sparc32 directory did not work. They are actually used only by the hybrid 32-bit + V9 CPU configuration.
2007-09-15Atsushi Nemoto writes:Mike Frysinger
In MIPS syscall(2), .cpload was added to an the error path, but it was not enough for ABIs other then O32. Use SETUP_GP, SETUP_GP64 and RESTORE_GP64 to handle all ABIs. This patch fixes an error path of MIPS pipe(2) too.
2007-07-29Remove stray code alignment (.align 16 and .align 4 directives)Denis Vlasenko
from i386 and x86_64.
2007-07-18include/sys/mman.h says that msync exists only on MMU.Denis Vlasenko
Make msync.c agree on this.
2007-07-18Enable all of the remaining baud rates. All of the other architectures have ↵"Steven J. Hill"
them enabled, so let's go all the way. There was a quick discussion on IRC about making the max baud rate configurable. That requires a bunch of #ifdef salting throughout all of the 'termios.h' files for the pre-processor to chew on. I'm going to pass on that for now.
2007-07-12Fix broken syscall() function since the original patch did not work."Steven J. Hill"
2007-06-24- make sure to define _LIBC in libc-symbols.h before including anythingBernhard Reutner-Fischer
else. - internal_function is only used inside libc, so do not define it in uClibc_arch_features.h on i386 if we are outside of libc.
2007-06-13Carmelo AMOROSO <carmelo.amoroso@st.com> writes:Joakim Tjernlund
Hi All, this patch fixes a mismatch in ucontext struct between uClibc and kernel. In this way a signal handler installed by sigaction can access to the whole machine state correctly. This can be applied both to trunk and nptl branch
2007-05-31Atsushi Nemoto writes:Mike Frysinger
Current MIPS readahead(), posix_fadvise(), posix_fadvise64() do not match with kernel on all ABIs. On O32 ABI, a padding is needed before a long long argument. On N32/N64, a long long argument should be passed via a single register.
2007-05-31Atsushi Nemoto writes:Mike Frysinger
http://www.opengroup.org/onlinepubs/009695399/functions/posix_fadvise.html states it returns error code instead of setting errno.
2007-05-25Jean-Christian de Rivaz writes:Mike Frysinger
I actually suspect this code into the file uClibc/libc/sysdeps/linux/common/poll.c: tval.tv_nsec = (timeout % 1000) *1000; <==== make only usec! From milisecond this really needs a * 1000000 to make nanosecond. Without this a 1100 milisecond timeout is converted into a 1 seconde and 100 microsecond timeout! This can explain the weird result of the test code.
2007-05-25Remove the arch specific mmap impl. for Powerpc. The common one will do.Joakim Tjernlund
2007-05-24Fix MIPS syscall() and pipe functions to set errno correctly as reported by ↵"Steven J. Hill"
Daniel Jacobowitz on the mailing list. More information available at <http://www.uclibc.org/lists/uclibc/2007-May/017968.html> .
2007-05-24Fix ARM EABI signal unwinding to accomodate signal frame layout between ↵"Steven J. Hill"
Linux kernel versions as reported by Joseph S. Myers on the mailing list. More information available at <http://www.uclibc.org/lists/uclibc/2007-May/017971.html> .
2007-05-15Restored indentation.Peter Kjellerstedt
2007-05-15Made it compile again.Peter Kjellerstedt
2007-05-15Fix arm mmap when using mmap2 syscall. Fixes bug #1303Khem Raj
2007-04-30Carmelo AMOROSO writes:Mike Frysinger
running LTP test suite on uClibc-nptl for sh4 I found a bug into pread and pwrite functions. When the offset is negative it is not correctly handled due to a missing shift operation, so it is passed to the syscall as the highest unsigned positive value.
2007-04-02fixes from Carmelo AMOROSO to depend less on kernel headersMike Frysinger
2007-03-31Update comment regarding passing dl_fini.Joakim Tjernlund
2007-03-29Revert last change until we figure out the correct fix.Rob Landley
2007-03-28Make the code match the comments. (I narrowed down the bug, Khem Raj Rob Landley
pointed out the solution. This fixes a segfault for me on exit from a statically linked "hello world".)
2007-03-19Joseph S. Myers writes:Joakim Tjernlund
On PowerPC, r13 is used for a small data pointer and needs to be set up from _SDA_BASE_ (defined by the linker) at startup. This is needed for the GCC testcase gcc.target/powerpc/980827-1.c to work. This patch fixes that testcase (verified for both static and dynamic linking).
2007-03-18Bernd Schmidt writes: The following patch is needed for libc to be able to ↵Mike Frysinger
emulate poll with ppoll.
2007-03-14dont include asm/user.hMike Frysinger
2007-03-13Using local variable 'result' caused problems with lseek64 syscall failing ↵Khem Raj
with gcc 4.2. Renaming to make it a bit uncommon name.
2007-03-12fix from upstream blackfin repo for sigsetjmpMike Frysinger
2007-03-11Patch from Al Stone to fix ia64:Rob Landley
The attached patch works around some compilation failures on ia64 caused by the use of the C preprocessor ## operator, and allows the ia64 default configuration to build again -- or, at least get as far as an x86 build does (the current source tree has some problems compiling because of conflicting type declarations for __kernel_dev_t).
2007-03-08Sync kernel_stat64 with kernel. Thanks to Daniel Jacobowitz for hints.Khem Raj
2007-03-08Patch from Khem Raj that fixes running gcc on arm for me. (Otherwise itRob Landley
says "virtual memory exhausted" trying to build hello world.)
2007-03-08svn 17941/17943 broke the build. 18032 made the threaded case compile Rob Landley
again, this makes the non-threaded case compile again. I have no idea if this is the proper fix, I'm just tired if it not compiling for two weeks.
2007-03-07Sync sh's procfs.h with glibc, fixes gdbserver.Paul Mundt
Patch from Carmelo Amoroso <carmelo73@gmail.com>.
2007-03-07Fix PLTJMP() token pasting build error, patch fromPaul Mundt
Carmelo Amoroso <carmelo73@gmail.com>.
2007-03-06I always miss svn add.Khem Raj
2007-03-06Add posix_fadvise posix_fadvise64 for arm.Khem Raj
Import INTERNAL_SYSCALL macro for i386 from glibc. Use above macro in posix_fadvise implementation if an arch defines it.
2007-03-01Fix compiler warning about shadowed declaration.Khem Raj
2007-03-01Should be __sigset_t instead of sigset_t.Khem Raj
2007-02-28add support for ppoll() and emulate poll() with it when __NR_poll does not existMike Frysinger
2007-02-28Add a hack for compiling a 32 bit user space with a 64 bit kernel on x86_64Eric Andersen
2007-02-28ifdef out RTLD defines we dont actually support nor are in POSIXMike Frysinger
2007-02-15Atsushi Nemoto writes:Mike Frysinger
When I imported INLINE_SYSCALL, etc. from glibc, I just copied whole macros for each ABI. Actually, except for argument type (long vs. long long), internal_syscall[0-4] are identical for all ABI, and internal_syscall[5-6] for N32/N64 are identical for N32/N64. And I just disabled FORCE_FRAME_POINTER since it had caused build failure, but including <alloca.h> can solve it. Here is a patch to handle these issues, plus asm/__asm__ and volatile/__volatile__ conversion. Thanks for Peter S. Mazinger who did basic work of this cleanup.
2007-02-13Add missing bits/fenv.h that got lost in the e500 port.Joakim Tjernlund
clean up E500 math support somewhat. From Steve Papacharalambous with mods by me.
2007-02-12Impl. linux syscalls sched_getaffinity/sched_setaffinity butJoakim Tjernlund
protect its use by #ifdef INTERNAL_SYSCALL since not all arch's has INTERNAL_SYSCALL. All arch's not having INTERNAL_SYSCALL in libc/sysdeps/linux/<arch>/bits/syscalls.h should get an update from glibc.
2007-02-12Updates from glibc.Joakim Tjernlund
2007-02-12Rehash the PowerPC e500 port to avoid creating symlinks Joakim Tjernlund
in the powerpc arch code and make more code common with classic PowerPC. From Steve Papacharalambous Lets hope I didn't break something.
2007-02-12Atsushi Nemoto writes:Mike Frysinger
Current ucontext_t does not match with kernel's definition. Also, on N32 ABI, we can not use kernel's struct sigcontext since kernel's sizeof(long) and user's sizeof(long) is differ. For both data structure, just importing header files from recent glibc fixes the mismatch. So here is a patch importing sys/ucontext.h and bits/sigcontext.t from glibc-2.5.