summaryrefslogtreecommitdiff
path: root/libc/sysdeps
AgeCommit message (Collapse)Author
2011-02-09sync bits/socket.h PF_* / AF_* values with 2.6.38-rc3Peter Korsgaard
A number of new address / protocol families have been added over the years, so sync with Linux 2.6.38-rc3, adding CAN, ISDN, Phonet, Zigbee, .. which are starting to be used by applications. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-02-09arm: mv nptl specific atomic impl to common placeBernhard Reutner-Fischer
Thanks to Nitin Garg for notincing! Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-02-01nios2: Name architecture correctly in endian.h headerTobias Klauser
Nios II is not i386 :-) Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2011-01-29nptl/mips64: Fix build when using mips64 and ABIs other than o32Khem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-01-15cris: Fix build issuesKhem Raj
Thanks Waldemar Brodkorb for reporting Signed-off-by: Khem Raj <raj.khem@gmail.com>
2010-12-27sparc: check for log double support in gccKonrad Eisele
To compile the quad float emulation library gcc needs __LONG_DOUBLE_128__ macro defined. Check first, if not supported then revert to the qp_ops.c stubs Signed-off-by: Konrad Eisele <konrad@gaisler.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2010-12-17libm_sh: add optimised assembly implementation of lroundf and lrintfChristian Bruel
* libc/sysdeps/linux/sh/sysdep.h: Add LOCAL macro * libm/sh/sh4/Makefile.arch: Include asm source in the build * libm/sh/sh4/s_lrintf.S [NEW]: optimised asm lrintf * libm/sh/sh4/s_lroundf.S [NEW]: optimised asm lroundf Signed-off-by: Christian Bruel <christian.bruel@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-12-15sh_fpu: Do not allow inclusion of fpu_control on not SH4 coreCarmelo Amoroso
Instead of emitting a warning even when compiling for SH4, stop compilation with an #error directive when not on SH4 core. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-11-18Adding quad float gcc intrinsic implementation for SPARCAustin Foxley
Sparc-Gcc generates q_xxx intrinsic calls for quad float ("long double") code. The routines from glibc's glibc-2.9/sysdeps/sparc/sparc32/soft-fp/* where taken and ported to uclibc. Signed-off-by: Konrad Eisele <konrad@gaisler.com> Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2010-11-10microblaze: build infrastructureSteven J. Magnani
Fix Microblaze config and makefiles. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-10microblaze: thread supportSteven J. Magnani
Header files needed to build linuxthreads.old for microblaze. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-10microblaze: misc headersSteven J. Magnani
Other header files for uClibc compilation. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-10microblaze: kernel headersSteven J. Magnani
Sync kernel header definitions with those used in recent mainline kernels. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-10microblaze: Restore soft-floatSteven J. Magnani
Software floating point for microblaze. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-10microblaze: vfork/clone interfaceSteven J. Magnani
Fix the microblaze vfork() and clone() implementations. Add support for clone2(). Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-10microblaze: syscall interfaceSteven J. Magnani
Fix the microblaze syscall interface. Recent mainline kernels no longer carry userland code to invoke syscalls and microblaze can use the uClibc generic code. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-10microblaze: Fix crt bootstrapSteven J. Magnani
Rework crt bootstrap to work with the new __uClibc_main(), and hardwire crt init/fini code since the awk approach to generating it on the fly doesn't work for microblaze. The output from the gcc 4.1.2 compiler is scrambled so that the tags expected by the awk script to bracket the init/fini entry and exit code no longer do. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-10microblaze: Fix setjmp/longjmpSteven J. Magnani
Some state and registers are missing from setjmp/longjmp handling. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-10-31libm: improve readability of math.h; expand comments and docsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-10-27Fix msync() redefinition for noMMU buildBernhard Reutner-Fischer
An architecture that _may_ have a MMU (and thus implements the msync syscall), but for which the kernel and uClibc are built as noMMU, we have a stub for msync. Thanks to Steven J. Magnani for noticing. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-10-27mips: fix errno setting after syscallAlexander Gordeev
If there was an error during syscall then after it's completion a3 register holds a non-zero value and v0 holds an actual error code which should be saved in errno. This can be achieved by calling __syscall_error with the value from v0 as a parameter. So this value should be stored in a0, but the appropriate assembly instructions are missing. Fixed this now by adding "move a0, v0". I think it was once fixed by 58c5f8ba4cdf62342d05a546d15404cbbb3c4e07 but then something went wrong. Again... Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-10-22*: inline constant __sig{add,del}set and __sigismemberDenys Vlasenko
text data bss dec hex filename - 318 4 0 322 142 libc/pwd_grp/lckpwdf.o + 312 4 0 316 13c libc/pwd_grp/lckpwdf.o - 166 0 1 167 a7 libc/stdlib/abort.o + 157 0 1 158 9e libc/stdlib/abort.o - 42 0 0 42 2a libc/sysdeps/linux/common/pause.o + 27 0 0 27 1b libc/sysdeps/linux/common/pause.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
2010-10-22remove superfluous libc_hidden_proto(memcpy) and #includeDenys Vlasenko
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
2010-10-22sleep: employ __USE_EXTERN_INLINES (with necessary fixes)Denys Vlasenko
__USE_EXTERN_INLINES was unused and had bit-rotted, had to fix it when it didn't work as intended at first. text data bss dec hex filename - 168 0 0 168 a8 libc/unistd/sleep.o + 146 0 0 146 92 libc/unistd/sleep.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
2010-10-01sparc: pipe.SAustin Foxley
return value of pipe on success is supposed to be 0 Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2010-09-20nptl: Fix libpthread build when UCLIBC_LINUX_SPECIFIC is disabledCarmelo Amoroso
NPTL library needs both madvise and statfs symbols, that are guarded by UCLIBC_LINUX_SPECIFIC option. This fix provides these symbols too when NPTL is used, indipendently by UCLIBC_LINUX_SPECIFIC choice. Otherwise libpthread link fails as below: LD libpthread-0.9.32-git.so libpthread/nptl/libpthread_so.a(pthread_create.oS): In function `__free_tcb': pthread_create.c:(.text+0x1184): undefined reference to `madvise' libpthread/nptl/libpthread_so.a(sem_open.oS): In function `__where_is_shmfs': sem_open.c:(.text+0x764): undefined reference to `statfs' collect2: ld returned 1 exit status make: *** [lib/libpthread.so] Error 1 Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-09-16nptl_sh: Fix compiler warning due to shadowed variableCarmelo Amoroso
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-09-15libc: Fix cancellation handling in some C functionsSalvatore Cro
According to POSIX.1-2008 standard, the following syscalls shall be cancellation points : waitid, sleep, fdatasync, ppoll. Further, if generic syscall is not available and stubs are configured, provide the stub implementation for function. Signed-off-by: Salvatore Cro <salvatore.cro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-08-31libc: Provide both getpgid and __getpgid symbolsCarmelo Amoroso
Indeed unistd.h header does export '__getpgid' by default, while uClibc provide only 'getpgid' implementation. The 'getpgid' symbol is exported by standard header if __USE_XOPEN_EXTENDED is defined. This patch alignes uClibc implementation with standard header (matching with glibc behaviour). Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-08-06nptl i686: avoid cpp problems with thunk sectionBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-08-05math: isnan is a C99 featureHenning Heinold
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de>
2010-08-02nptl: _POSIX_IPV6 depends on UCLIBC_HAS_IPV6Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-07-27new helper funcs for alloca/malloc with mmu/nommuMike Frysinger
The rpc rcmd code has some ugly ifdef mazes to handle mmu/nommu differences just to select alloca or malloc. Unify those with some helper macros in a new header, and then convert the rcmd code over to it. This is all geared towards fixing the getdents helper functions which only use alloca() atm. Now that we have helper functions, convert the getdents functions over too. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Steven J. Magnani <steve@digidescorp.com>
2010-07-27remove trailing comma in enumBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-07-27lutimes: add lutimes supportVladimir Zapolskiy
This patch adds lutimes library call support. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-07-26bfin: pull in common/sysdep.hMike Frysinger
Fixes random build errors in linux/common/. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-26msync: skip if syscall is missingMike Frysinger
Some arches skip the msync syscall as it is useless (like nommu). So don't require it to build. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-26nommu: fix building of fork.c when stubs are disabledMike Frysinger
We scrub the fork() prototype for nommu/no stubs, so attempting to get its type isn't going to work. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-26bfin: add exec stack markings to assembly filesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-21arm/crt1.S: Avoid dependency on PC+4 or PC+8Khem Raj
* fix a problem with Thumb PIE binaries, where the GOT was located incorrectly because of an offset 8 Signed-off-by: Khem Raj <raj.khem@gmail.com>
2010-07-15arm: Macros in sysdeps/linux/arm also needed to be changed to accept _a1 to ↵Khem Raj
__a1 renaming. Signed-off-by: Khem Raj <raj.khem@gmail.com>
2010-07-14silence shadow warningsBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-07-09include/param.h: Dont use ARG_MAX from kernel headersKhem Raj
* Use getrlimit for ARG_MAX in sysconf on nptl. * Define NCARGS directly instead of ARG_MAX Signed-off-by: Khem Raj <raj.khem@gmail.com>
2010-07-07arm: Silence warning about shadow declarationsKhem Raj
libc/inet/socketcalls.c: In function ‘__libc_recvfrom’: libc/inet/socketcalls.c:229:1: warning: declaration of ‘_sys_result’ shadows a previous local libc/inet/socketcalls.c:229:1: warning: shadowed declaration is here Signed-off-by: Khem Raj <raj.khem@gmail.com>
2010-07-06nptl: fix buildsysBernhard Reutner-Fischer
Now automatically picks the correct (arch and subarch specific) impls in favour of generic impls. make O=/tmp/objs PREFIX=/my/sysroot -j works now as expected (both out-of-tree as well as parallel-safe). Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-07-06Revert "don't make __errno_location / __h_errno_location hidden"Austin Foxley
This reverts commit 0d6ee549bc86fd330672a79d9a87d2c3825eea67. We need to find a solution that will work in shared and static libraries Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2010-07-05don't make __errno_location / __h_errno_location hiddenPeter Korsgaard
Closes #2089 (https://bugs.busybox.net/show_bug.cgi?id=2089) __errno_location / __h_errno_location access has to go through the PLT like malloc/free, so the linuxthread variants gets used instead when compiling with -pthread. Based on http://github.com/mat-c/uClibc/commit/328d392c54aa5dc2b8e7f398a419087de497de2b Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2010-07-03remove extra comma in lock macroAustin Foxley
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2010-06-30mips/syscall-error: Choose the correct version for setting up errno.Khem Raj
* Current function is a C protype and PSEUDO macro does not transfer syscall return parameters to correct argument registers for a C function. This causes problem with syscalls setting wrong value for errno when they encounter an error. * Fixes PR/2089 for mips/nptl Signed-off-by: Khem Raj <raj.khem@gmail.com>
2010-06-29remove redundant args to do_lnBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>