Age | Commit message (Collapse) | Author |
|
fallocate system call must return 0 on success. On error, -1 is returned
and errno is set to indicate the error.
However there is an error in fallocate which is fixed by this patch - it
does not set errno and returns invalid value on error (it returns error
code instead of -1).
This error is detected in LTP's test kernel/syscalls/fallocate02:
----------->8----------
fallocate(..., 1, 0, 1024) failed, expected errno:9: TEST_ERRNO=0
fallocate(..., 1, -1024, 1024) failed, expected errno:22: TEST_ERRNO=0
fallocate(..., 1, 1024, -1024) failed, expected errno:22: TEST_ERRNO=0
fallocate(..., 1, 12288, 0) failed, expected errno:22: TEST_ERRNO=0
fallocate(..., 1, 12288, -1024) failed, expected errno:22: TEST_ERRNO=0
fallocate(..., 1, -24576, 1024) failed, expected errno:22: TEST_ERRNO=0
----------->8----------
Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
|
|
|
|
|
|
access to the jmp_buf structure occasionally happens asymmetrically:
fields defined in pointer size width (64 on N32) can be accessed as
32-bit words, but in that case, a̲l̲l̲ involved code must agree on that…
|
|
|
|
ret_ERRVAL is used by mq_timedsend and mq_timedreceive, it needs to be
defined to retw, otherwise error return from those functions segfaults.
This fixes the following testsuite failures:
.... tst-mqueue1
FAIL tst-mqueue1 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue2
FAIL tst-mqueue2 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue3
FAIL tst-mqueue3 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue4
FAIL tst-mqueue4 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue5
FAIL tst-mqueue5 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue6
FAIL tst-mqueue6 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Cancellable syscalls use call8 to call functions that enable/disable
cancellation, thus they cannot use the default FRAMESIZE.
Redefine FRAMESIZE for such syscalls.
This fixes the following testsuite failure:
.... tst-mqueue8
FAIL tst-mqueue8 got 1 expected 0
going to cancel mq_receive in-time
in-time mq_receive cancellation succeeded
going to cancel mq_receive early
Didn't expect signal from child: got `Segmentation fault'
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
into uClibc
|
|
|
|
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
- wire up new kernel
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
- remove symbol prefix
- new startup
- new clone syscall support
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
uClibc doesn't define signal info for the SIGSYS signal which is issued
in case of hitting a syscall prohibited by seccomp.
This is sad as it makes debugging seccomp filter policies impossible on
some architectures (at least ARM and PowerPC, maybe also others) which
do not coincidentally set si_value.sival_int as the syscall number.
To fix this, import the definitions and macros needed from glibc.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This reverts commit bd3eaf83ef1b4954b6c0e7ba8bbdd29b2cd4a833.
They are now implemented.
|
|
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
It seems the condition was reversed which lead to e.g. arm-920t being
confused
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When compiling python you get duplicate symbol problem.
Seen in the autobuilders of buildroot project.
|
|
|
|
In file included from ./include/sys/syscall.h:33:0,
from libc/sysdeps/linux/common/sync_file_range.c:10:
libc/sysdeps/linux/common/sync_file_range.c: In function '__sync_file_range_nocancel':
./include/bits/syscalls.h:144:16: error: conflicting types for '_v3'
register int _v3 __asm__ ("v3") = _v3tmp;
^
./libc/sysdeps/linux/arm/sysdep.h:281:7: note: in expansion of macro 'LOAD_ARGS_7'
LOAD_ARGS_##nr (args) \
^
./libc/sysdeps/linux/arm/sysdep.h:324:2: note: in expansion of macro 'INTERNAL_SYSCALL_RAW'
INTERNAL_SYSCALL_RAW(SYS_ify(name), err, nr, args)
^
./libc/sysdeps/linux/arm/sysdep.h:256:40: note: in expansion of macro 'INTERNAL_SYSCALL'
({ unsigned int _inline_sys_result = INTERNAL_SYSCALL (name, , nr, args); \
^
libc/sysdeps/linux/common/sync_file_range.c:32:9: note: in expansion of macro 'INLINE_SYSCALL'
return INLINE_SYSCALL(sync_file_range, 7, fd, 0,
^
In file included from ./libpthread/nptl/sysdeps/unix/sysv/linux/arm/sysdep-cancel.h:18:0,
from ./include/cancel.h:58,
from libc/sysdeps/linux/common/sync_file_range.c:15:
./libc/sysdeps/linux/arm/sysdep.h:280:21: note: previous definition of '_v3' was here
register int *_v3 __asm__ ("v3") = _sys_buf; \
...
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
No need to build crt when just generating headers
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
ucontext_i.h too depends on uClibc_config.h.
Update it to look like the other MANGLE generated files and tweak
prereqs
Fixes: make realclean ; make -j libc/misc/internals/__uClibc_main.i
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Only the stub warnings left for now.
|
|
No need to build crt when just generating headers
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
ucontext_i.h too depends on uClibc_config.h.
Update it to look like the other MANGLE generated files and tweak
prereqs
Fixes: make realclean ; make -j libc/misc/internals/__uClibc_main.i
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
|
|
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[updated changelog]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
when building uClibc with -O0 (DODEBUG build) the default sigrestorer
had some extra glue code generated for stack manipulation which was
messing up resume from signal path.
So annotate the function with -Os so that gcc would only generate the
bare min 2 instruction TRAP sequence
Reported-and-Debugged-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Note: _PATH_UTMPX == _PATH_UTMP and the utmp struct is identical to the
utmpx struct so this only changes the external API entrypoints and NOT
the underlying data source.
This saves about 500b (~1300b from previously ~1950) while at it.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Introduce a <sys/random.h> for it.
/* FIXME: aren't there a couple of __restrict and const missing ?
*/
extern int getrandom(void *__buf, size_t count, unsigned int flags)
__nonnull ((1)) __wur;
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Otherwise it creates wrong references from shared libs
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
https://dev.openwrt.org/browser/trunk/toolchain/uClibc/patches-0.9.33.2/616-mips_fix_stat_time.patch
When booting in Qemu you get for example failures from mdev -s otherwise.
|
|
Add __LEAF to all __THROW, introduce non-leaf __THROWNL
Adjust affected spots accordingly.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Sync with GNU libc, see here why r7 is not usable for
thumb mode:
https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/arm/sysdep.h;h=37eac192b1e2e7f53f112b16450b9ce57054e27f;hb=HEAD
Remove old OABI support.
Fixes build breakage for ARM noMMU builds.
Still no runtime testing.
|
|
|
|
Otherwise we have a broken scenario with non-threading builds.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
include/bits/sigset.h:219:62: warning: right-hand operand of comma expression has no effect [-Wunused-value]
include/bits/sigset.h:210:63: warning: right-hand operand of comma expression has no effect [-Wunused-value]
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
|
|
|
|
Currently UCLIBC_SYSCALL_ALIGN_64BIT is not explicitly handled. Fix that
and make sure the special handling is done for powerpc/xtensa which use
UCLIBC_SYSCALL_ALIGN_64BIT but don't use hole punched syscall handler in
kernel.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
arm/powerpc/xtensa pass @advice as 2nd arg to syscall (vs. canonical 4th)
Current code however does this for UCLIBC_SYSCALL_ALIGN_64BIT which
powerpc/xtensa also happen to define.
This is not true for ARCv2 ISA and possibly other arch of future with
64-bit even register requirement, which uses the standard syscall
handler in kernel.
Fix that by providing 2 variants of SYSCALL_ALIGN_64BIT
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This is next gen Instruction Set Architecture from Synopsys and basis
for the ARC HS family of processors.
http://www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor&elq_mid=5732&elq_cid=458802
http://www.synopsys.com/IP/ProcessorIP/ARCProcessors/arc-hs/Pages/default.aspx
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|