| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Add __LEAF to all __THROW, introduce non-leaf __THROWNL
Adjust affected spots accordingly.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Otherwise we have a broken scenario with non-threading builds.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
include/bits/sigset.h:219:62: warning: right-hand operand of comma expression has no effect [-Wunused-value]
include/bits/sigset.h:210:63: warning: right-hand operand of comma expression has no effect [-Wunused-value]
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Currently UCLIBC_SYSCALL_ALIGN_64BIT is not explicitly handled. Fix that
and make sure the special handling is done for powerpc/xtensa which use
UCLIBC_SYSCALL_ALIGN_64BIT but don't use hole punched syscall handler in
kernel.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
arm/powerpc/xtensa pass @advice as 2nd arg to syscall (vs. canonical 4th)
Current code however does this for UCLIBC_SYSCALL_ALIGN_64BIT which
powerpc/xtensa also happen to define.
This is not true for ARCv2 ISA and possibly other arch of future with
64-bit even register requirement, which uses the standard syscall
handler in kernel.
Fix that by providing 2 variants of SYSCALL_ALIGN_64BIT
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This is next gen Instruction Set Architecture from Synopsys and basis
for the ARC HS family of processors.
http://www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor&elq_mid=5732&elq_cid=458802
http://www.synopsys.com/IP/ProcessorIP/ARCProcessors/arc-hs/Pages/default.aspx
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Not relevant anymore since commit e8cc14e59ed3f66b84e,
"libc: rename TRUNCATE64_HAS_4_ARGS to SYSCALL_ALIGN_64BIT"
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
ARC CPU may have MMU page size of 4/8(default)/16k.
uClibc needs to have page size configured accodring to HW it will be run on.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix copy'n paste error for ppc64 and other sync_file_range2 arches
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
mknod() in glibc/eglibc will check the argument, like this,
...
if (k_dev != dev) {
__set_errno (EINVAL);
return -1;
}
...
So add argument check in uclibc's mknod() too.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The GNU variant of getopt() previously had no way to turn off
getopt_long() support.
|
|
Rename _timer[12] to si_tid and si_overrun to fix compilation of
strace-4.9+
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
statfs() is a Linux-specific function. When building without
UCLIBC_LINUX_SPECIFIC set, libc_hidden_proto(statfs) in
include/sys/statfs.h is unmatched with libc_hidden_def(statfs)
in libc/sysdeps/linux/common/statfs.c, leading to a compile
error. This patch fixes this, as well as adds statfs() to the
list of Linux-specific functions in extra/Configs/Config.in.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
add fmovem{x,.d,.*} ISA conditional
Fixes assembler errors for 5206.
isa_a, isa_b (or a+, don't remember) do not have emx, use em.d there.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Update sys/ptrace.h to latest glibc release for a lot of missing
definitions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Update sys/ptrace.h to latest glibc release for a lot of missing
definitions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
define NOT_IN_libc / IS_IN_libxxx appropriately
to fix pthread_once
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
We add the Linux-specific function fallocate() which allows the user to
directly manipulate allocate space for a file. fallocate() can operate
in different modes, but the default mode is equivalent to posix_fallocate()
which is specified in POSIX.1.
Recent releases of e2fsprogs 1.42.11 and above expect fallocate64() to be
available.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
We cannot override individual functions on a per-arch basis otherwise
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The sparc64/sparcv9 code is incomplete. Furthermore there is
no real embedded hardware for sparc64 available, so better remove
it until someone comes up with a complete port.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
otherwise you get compile warnings, when building for m68k.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This reverts commit f51fb26dbcceee9e48d10facc830bd4a549f6cc2.
This fixes linking error for sparc build.
While building a sparc system you get following linking error:
libc/sysdeps/linux/sparc/pipe.S:54: undefined reference to `__GI___errno_location'
Removing the HIDDEN_JUMPTARGET fixes the issue, while using gcc 4.8.3/binutils 2.24.
The definition of __errno_location was changed recently here:
http://git.uclibc.org/uClibc/commit/?id=8f550715c2b211036fc273add3cb5219397ed312
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When using something like this:
$ echo foo|grep foo|wc -l
with mksh shell, you get an runtime error.
Glibc and klibc does not do these extra check.
After removing this check using double pipes work fine.
Tested with Qemu 2.1.0.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
There was a runtime error in systems without large file support. Call
fseek(fd, 4096, SEEK_SET) has been failing with EINVAL, though it was
succeeding for offset = 4092. This has been happening because llseek system
call accepts 64-bit value as an offset argument and lseek function has been
ordering 32-bits words that form this offset value, according to the
endianness. However this ordering to match endianness is not required,
because llseek doesn't accept one 64-bit offset argument, it accepts two
32-bit offset argument, then stitches them into one following its
endianness. As a result on little endian system, order of words has been
swapped two time: in libc and in kernel. Thus call to fseek with offset 4096
(0x1000) was doing a system call to llseek with offset 0x1000_0000_0000. I'm
not entirely sure why then offset = 4092 hasn't been failing then.
This patch removes malicious swap of words when calling llseek.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
commit 00571b43df2e "libc: posix_fadvise: restore implementation for xtensa"
enabled posix_fadvise() for all arches (it was just not generated
before).
However this also unearthed an issue introduced by ee84b8b400
"linux: posix_fadvise: use new SYSCALL_ALIGN_64BIT" which is to
referencing LFS'ish code (off64_t) w/o proper checks which causes build
to break for !LFS.
Fix this by calling posix_fadvise64() only for LFS case and open-code
it's equivalent for !LFS.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: markos Chandras <markos.chandras@gmail.com>
Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Typically kernel would set the TP register of newly created thread in
clone syscall with CLONE_SETTLS.
However this implies that:
* kernel knows of the exact TP register (which is already different for
ARCompact and ARCv2) and is a detail which becomes part of the ABI
* kernel also needs to handle the unlikely but possible case of !TLS
userspace (e.g. Android libc) case where TP reg is not reserved and
thus need not be mucked with (using ELF personality based detection)
It is better to confine this detail to userspace runtime and set TP reg
right after clone syscall returns.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Native GDB requires elf_fpregset_t to be defined, even if floating point
registers are absent. In this case we use empty structure. Additionally we
redefined prfpregset_t to use this new type.
And there has been an error: it was defined that user_regs_struct has 20
registers, while it has 40.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This showed up due to longstanding test/unistd/clone failure where post
clone, the callback was not exiting and rather falling thru in into main
program.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
- Use syscalls-common.h vers of INTERNAL_SYSCALL / INLINE_SYSCALL_NOERR
- INLINE_SYSCALL takes syscall name (e.g. write)
- {INLINE,INTERNAL}_SYSCALL_NCS macros take syscall num (__NR_write)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
For ARC builds atleast, __NR_xxx was not trickling into in open64.c
causing open64->openat a needless detour via open
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When x86_64 cpu contains 'cpu_has_xsave' flag(in kernel),call the
pthread_cancel will have a segmentation fault. Because gcc could
not find the end of stack in user signal stack.
Signed-off-by: Zhang Pu <glen4linux@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
As Will noticed, the header this check is currently done in
is asm-only, and is not meant to be included from C code.
This breaks compilation when compiled for a Thumb2-aware CPU.
Move the BX check to its own header, and revert 7a246fd.
Reported-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Will Newton <will.newton@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The conditional load needs to be made part of an IT block on Thumb2
cores.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Patch "LT.old: Make __errno_location/__h_errno_location thread safe"
uncovered yet another bug with static linking and errno (hopefully this
is last of them all).
Currently, __errno_location is declared weak but is defined strong.
While this provides with the desired weak semantics in dso, it
is subtly broken in static links.
Quoting Joern Rennecke (ARC gcc expert):
| I think the issue is that you declare the function as weak in the
| header file. That is a rare instance where you want the reference
| use declaration that differs a bit from the definition.
| If the reference uses a weakly declared function, that creates a
| weakref, i.e. the linker won't bother to look for this symbol at
| all - if it gets linked in for some other reason, fine,
| otherwise, it stays zero.
So the solution to declare strong, define weak.
Supporting data
-----------------
orig code: ARM mmap wrapper (LT.old build + my prev patch for errno)
_mmap:
@ args = 8, pretend = 0, frame = 0
@ frame_needed = 0, uses_anonymous_args = 0
stmfd sp!, {r4, r5, r7, lr}
ldr r5, [sp, #20]
movs ip, r5, asl #20
beq .L2
bl __errno_location(PLT)
mov r3, #22
str r3, [r0, #0]
mvn r0, #0
...
...
.weak __errno_location
A statically linked hello world program which uses mmap too.
As we can see__errno_location is completely gone - which is
semantically wrong - we need functional errno.
00008274 <__GI_mmap>:
8274: e92d40b0 push {r4, r5, r7, lr}
8278: e59d5014 ldr r5, [sp, #20]
827c: e1b0ca05 lsls ip, r5, #20
8280: 0a000004 beq 8298
8284: e320f000 nop {0}
^^^^^^^^^^
8288: e3a03016 mov r3, #22
828c: e5803000 str r3, [r0]
8290: e3e00000 mvn r0, #0
This in turn is due to a fixup in ARM ld which transforms branch-to-null
into a nop. It is better than crashing but still wrong since errno
handling is removed.
With the patch, errno_location is restored back in test program.
00008274 <__GI_mmap>:
8274: e92d40b0 push {r4, r5, r7, lr}
8278: e59d5014 ldr r5, [sp, #20]
827c: e1b0ca05 lsls ip, r5, #20
8280: 0a000004 beq 8298 <__GI_mmap+0x24>
8284: eb000010 bl 82cc <__errno_location>
8288: e3a03016 mov r3, #22
828c: e5803000 str r3, [r0]
Cc: Christian Ruppert <christian.ruppert@abilis.com>
CC: Francois Bedard <Francois.Bedard@synopsys.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Joern Rennecke <joern.rennecke@embecosm.com>
Cc: Jeremy Bennett <jeremy.bennett@embecosm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
