Age | Commit message (Collapse) | Author |
|
The guards in posix_types.h are called _ASM_NIOS2_POSIX_TYPES_H, so
correctly use them here. Otherwise we wont be able to build uClibc
with headers exported from the current nios2 kernel.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Do not use __ipc_pid_t, since that is not visible after install.
Provide and use shmatt_t.
Add missing __END_DECLS.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
This adds support for the TI C6X family of processors.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com>
Signed-off-by: Bernd Schmidt <bernds@codesourcery.com>
|
|
guard the prototype with _LIBC, it is only for internal use
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Add support to use errno.h in ldso.
Move __set_errno into _LIBC guard.
Remove uClibc_errno.h, unused.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Simplify guard of uClibc internals, since _LIBC sections are removed on install.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
STRICT_HEADERS
Remove ucontext.h if SUSV4_LEGACY is not set and fix it's references.
Guard sigstack structure with SUSV4_LEGACY and STRICT_HEADERS.
Disable sigstack function prototype, it is not provided by uClibc.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Remove error handling from getegid/getgid/geteuid/getuid/getppid/getpid/getpgrp
Use strong_alias if fallbacks are needed
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
We use enosys_stub only in this file so make it static
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Avoid using strong_alias in ssp, some archs dislike it.
Make stack_chk_guard static.
Export __stack_smash_handler only if compatibility option is enabled.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Add some missing prototypes
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
NPTL build did not use the correct bits/sigthread.h, use a common version
avoiding this.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
ARM disables by default the support for ASM CFI directives.
Anyway using an old version of binutils that does not support some new
pseudo-op, the build fails as below:
AS libpthread/nptl/sysdeps/unix/sysv/linux/close.oS
libpthread/nptl/sysdeps/unix/sysv/linux/close.S: Assembler messages:
libpthread/nptl/sysdeps/unix/sysv/linux/close.S:9: Error: unknown pseudo-op: `.cfi_sections'
The problem is that the .cfi_sections pseudo should be wrapped by a macro
that expands to nothing when the CFI is off.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
CC: Khem Ray <ray.khem@gmail.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
We want to access the frame pointer, so do so directly rather than
"overflowing" the pregs array and ending up at the fp member.
This fixes the Blackfin build warnings:
libpthread/linuxthreads.old/ptlongjmp.c: In function 'pthread_cleanup_upto':
libpthread/linuxthreads.old/ptlongjmp.c:35: warning: array subscript is above array bounds
libpthread/linuxthreads.old/ptlongjmp.c:56: warning: array subscript is above array bounds
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Newer gcc's will generate a call to cacheflush when updating jump tables,
and that has to be done in kernel space (to avoid hardware anomalies). So
make sure uClibc provides that symbol.
Signed-off-by: Steve Kilbane <steve@whitecrow.demon.co.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Once we pull in the header, we're forced to declare the syscall with
all the right types.
Signed-off-by: Steve Kilbane <steve@whitecrow.demon.co.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Somehow Makefile.in ended in there, remove it.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
0f85b228 used 'filter-pout' instead of 'filter-out'. Fix that.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Commits 1f6601a and 094d82d introduced the "else ifeq" construct, which
requires GNU make v3.81 or higher. This breaks the build on RHEL4 hosts.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
See GCC PR47577; TODO: Remove them.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
A number of new address / protocol families have been added over the
years, so sync with Linux 2.6.38-rc3, adding CAN, ISDN, Phonet, Zigbee, ..
which are starting to be used by applications.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Thanks to Nitin Garg for notincing!
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Nios II is not i386 :-)
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Thanks Waldemar Brodkorb for reporting
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
To compile the quad float emulation library gcc needs
__LONG_DOUBLE_128__ macro defined. Check first, if not
supported then revert to the qp_ops.c stubs
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* libc/sysdeps/linux/sh/sysdep.h: Add LOCAL macro
* libm/sh/sh4/Makefile.arch: Include asm source in the build
* libm/sh/sh4/s_lrintf.S [NEW]: optimised asm lrintf
* libm/sh/sh4/s_lroundf.S [NEW]: optimised asm lroundf
Signed-off-by: Christian Bruel <christian.bruel@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Instead of emitting a warning even when compiling for SH4, stop
compilation with an #error directive when not on SH4 core.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Sparc-Gcc generates q_xxx intrinsic calls for quad float ("long double")
code. The routines from glibc's glibc-2.9/sysdeps/sparc/sparc32/soft-fp/*
where taken and ported to uclibc.
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Fix Microblaze config and makefiles.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Header files needed to build linuxthreads.old for microblaze.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Other header files for uClibc compilation.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Sync kernel header definitions with those used in recent mainline kernels.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Software floating point for microblaze.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix the microblaze vfork() and clone() implementations.
Add support for clone2().
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix the microblaze syscall interface.
Recent mainline kernels no longer carry userland code to invoke syscalls
and microblaze can use the uClibc generic code.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Rework crt bootstrap to work with the new __uClibc_main(),
and hardwire crt init/fini code since the awk approach to generating it on
the fly doesn't work for microblaze. The output from the gcc 4.1.2 compiler
is scrambled so that the tags expected by the awk script to bracket the
init/fini entry and exit code no longer do.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Some state and registers are missing from setjmp/longjmp handling.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
An architecture that _may_ have a MMU (and thus implements
the msync syscall), but for which the kernel and uClibc are built as
noMMU, we have a stub for msync.
Thanks to Steven J. Magnani for noticing.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If there was an error during syscall then after it's completion a3
register holds a non-zero value and v0 holds an actual error code which
should be saved in errno. This can be achieved by calling
__syscall_error with the value from v0 as a parameter. So this value
should be stored in a0, but the appropriate assembly instructions are
missing. Fixed this now by adding "move a0, v0".
I think it was once fixed by 58c5f8ba4cdf62342d05a546d15404cbbb3c4e07
but then something went wrong. Again...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
text data bss dec hex filename
- 318 4 0 322 142 libc/pwd_grp/lckpwdf.o
+ 312 4 0 316 13c libc/pwd_grp/lckpwdf.o
- 166 0 1 167 a7 libc/stdlib/abort.o
+ 157 0 1 158 9e libc/stdlib/abort.o
- 42 0 0 42 2a libc/sysdeps/linux/common/pause.o
+ 27 0 0 27 1b libc/sysdeps/linux/common/pause.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|