summaryrefslogtreecommitdiff
path: root/libc/sysdeps/linux
AgeCommit message (Collapse)Author
2007-09-15pull from Blackfin repo: optimized byteswap funcs!Mike Frysinger
2007-09-15pull from Blackfin repo: cleanup string funcsMike Frysinger
2007-09-15forgot to add this with previous sparc commit ...Mike Frysinger
2007-09-15use gcc input constraints to avoid often duplicated reloads when making syscallsMike Frysinger
2007-09-15if __NR__newselect and __NR_select are unavailable, fall back to __NR_pselect6Mike Frysinger
2007-09-15Blue Swirl writes:Mike Frysinger
I got the library to compile with the attached patches, though dynamic loader crashes early. In buildroot I changed the architecture name by hand from sparc to sparc64, otherwise the compiler produced 32-bit files with V9 (64-bit) instructions. This configuration is not supported by QEMU, so I aimed for pure 64-bit. I think Sparc64 option needs to be added to buildroot. The _Qp_ ops seem to be required by the ABI. This and setjmp patches are just hacks to get the compilation further. The _Qp_ ops can be found in glibc, would it be OK to use those? V9 assembler requires declarations for global register use. The mem* functions in sparc32 directory did not work. They are actually used only by the hybrid 32-bit + V9 CPU configuration.
2007-09-15Atsushi Nemoto writes:Mike Frysinger
In MIPS syscall(2), .cpload was added to an the error path, but it was not enough for ABIs other then O32. Use SETUP_GP, SETUP_GP64 and RESTORE_GP64 to handle all ABIs. This patch fixes an error path of MIPS pipe(2) too.
2007-07-29Remove stray code alignment (.align 16 and .align 4 directives)Denis Vlasenko
from i386 and x86_64.
2007-07-18include/sys/mman.h says that msync exists only on MMU.Denis Vlasenko
Make msync.c agree on this.
2007-07-18Enable all of the remaining baud rates. All of the other architectures have ↵"Steven J. Hill"
them enabled, so let's go all the way. There was a quick discussion on IRC about making the max baud rate configurable. That requires a bunch of #ifdef salting throughout all of the 'termios.h' files for the pre-processor to chew on. I'm going to pass on that for now.
2007-07-12Fix broken syscall() function since the original patch did not work."Steven J. Hill"
2007-06-24- make sure to define _LIBC in libc-symbols.h before including anythingBernhard Reutner-Fischer
else. - internal_function is only used inside libc, so do not define it in uClibc_arch_features.h on i386 if we are outside of libc.
2007-06-13Carmelo AMOROSO <carmelo.amoroso@st.com> writes:Joakim Tjernlund
Hi All, this patch fixes a mismatch in ucontext struct between uClibc and kernel. In this way a signal handler installed by sigaction can access to the whole machine state correctly. This can be applied both to trunk and nptl branch
2007-05-31Atsushi Nemoto writes:Mike Frysinger
Current MIPS readahead(), posix_fadvise(), posix_fadvise64() do not match with kernel on all ABIs. On O32 ABI, a padding is needed before a long long argument. On N32/N64, a long long argument should be passed via a single register.
2007-05-31Atsushi Nemoto writes:Mike Frysinger
http://www.opengroup.org/onlinepubs/009695399/functions/posix_fadvise.html states it returns error code instead of setting errno.
2007-05-25Jean-Christian de Rivaz writes:Mike Frysinger
I actually suspect this code into the file uClibc/libc/sysdeps/linux/common/poll.c: tval.tv_nsec = (timeout % 1000) *1000; <==== make only usec! From milisecond this really needs a * 1000000 to make nanosecond. Without this a 1100 milisecond timeout is converted into a 1 seconde and 100 microsecond timeout! This can explain the weird result of the test code.
2007-05-25Remove the arch specific mmap impl. for Powerpc. The common one will do.Joakim Tjernlund
2007-05-24Fix MIPS syscall() and pipe functions to set errno correctly as reported by ↵"Steven J. Hill"
Daniel Jacobowitz on the mailing list. More information available at <http://www.uclibc.org/lists/uclibc/2007-May/017968.html> .
2007-05-24Fix ARM EABI signal unwinding to accomodate signal frame layout between ↵"Steven J. Hill"
Linux kernel versions as reported by Joseph S. Myers on the mailing list. More information available at <http://www.uclibc.org/lists/uclibc/2007-May/017971.html> .
2007-05-15Restored indentation.Peter Kjellerstedt
2007-05-15Made it compile again.Peter Kjellerstedt
2007-05-15Fix arm mmap when using mmap2 syscall. Fixes bug #1303Khem Raj
2007-04-30Carmelo AMOROSO writes:Mike Frysinger
running LTP test suite on uClibc-nptl for sh4 I found a bug into pread and pwrite functions. When the offset is negative it is not correctly handled due to a missing shift operation, so it is passed to the syscall as the highest unsigned positive value.
2007-04-02fixes from Carmelo AMOROSO to depend less on kernel headersMike Frysinger
2007-03-31Update comment regarding passing dl_fini.Joakim Tjernlund
2007-03-29Revert last change until we figure out the correct fix.Rob Landley
2007-03-28Make the code match the comments. (I narrowed down the bug, Khem Raj Rob Landley
pointed out the solution. This fixes a segfault for me on exit from a statically linked "hello world".)
2007-03-19Joseph S. Myers writes:Joakim Tjernlund
On PowerPC, r13 is used for a small data pointer and needs to be set up from _SDA_BASE_ (defined by the linker) at startup. This is needed for the GCC testcase gcc.target/powerpc/980827-1.c to work. This patch fixes that testcase (verified for both static and dynamic linking).
2007-03-18Bernd Schmidt writes: The following patch is needed for libc to be able to ↵Mike Frysinger
emulate poll with ppoll.
2007-03-14dont include asm/user.hMike Frysinger
2007-03-13Using local variable 'result' caused problems with lseek64 syscall failing ↵Khem Raj
with gcc 4.2. Renaming to make it a bit uncommon name.
2007-03-12fix from upstream blackfin repo for sigsetjmpMike Frysinger
2007-03-11Patch from Al Stone to fix ia64:Rob Landley
The attached patch works around some compilation failures on ia64 caused by the use of the C preprocessor ## operator, and allows the ia64 default configuration to build again -- or, at least get as far as an x86 build does (the current source tree has some problems compiling because of conflicting type declarations for __kernel_dev_t).
2007-03-08Sync kernel_stat64 with kernel. Thanks to Daniel Jacobowitz for hints.Khem Raj
2007-03-08Patch from Khem Raj that fixes running gcc on arm for me. (Otherwise itRob Landley
says "virtual memory exhausted" trying to build hello world.)
2007-03-08svn 17941/17943 broke the build. 18032 made the threaded case compile Rob Landley
again, this makes the non-threaded case compile again. I have no idea if this is the proper fix, I'm just tired if it not compiling for two weeks.
2007-03-07Sync sh's procfs.h with glibc, fixes gdbserver.Paul Mundt
Patch from Carmelo Amoroso <carmelo73@gmail.com>.
2007-03-07Fix PLTJMP() token pasting build error, patch fromPaul Mundt
Carmelo Amoroso <carmelo73@gmail.com>.
2007-03-06I always miss svn add.Khem Raj
2007-03-06Add posix_fadvise posix_fadvise64 for arm.Khem Raj
Import INTERNAL_SYSCALL macro for i386 from glibc. Use above macro in posix_fadvise implementation if an arch defines it.
2007-03-01Fix compiler warning about shadowed declaration.Khem Raj
2007-03-01Should be __sigset_t instead of sigset_t.Khem Raj
2007-02-28add support for ppoll() and emulate poll() with it when __NR_poll does not existMike Frysinger
2007-02-28Add a hack for compiling a 32 bit user space with a 64 bit kernel on x86_64Eric Andersen
2007-02-28ifdef out RTLD defines we dont actually support nor are in POSIXMike Frysinger
2007-02-15Atsushi Nemoto writes:Mike Frysinger
When I imported INLINE_SYSCALL, etc. from glibc, I just copied whole macros for each ABI. Actually, except for argument type (long vs. long long), internal_syscall[0-4] are identical for all ABI, and internal_syscall[5-6] for N32/N64 are identical for N32/N64. And I just disabled FORCE_FRAME_POINTER since it had caused build failure, but including <alloca.h> can solve it. Here is a patch to handle these issues, plus asm/__asm__ and volatile/__volatile__ conversion. Thanks for Peter S. Mazinger who did basic work of this cleanup.
2007-02-13Add missing bits/fenv.h that got lost in the e500 port.Joakim Tjernlund
clean up E500 math support somewhat. From Steve Papacharalambous with mods by me.
2007-02-12Impl. linux syscalls sched_getaffinity/sched_setaffinity butJoakim Tjernlund
protect its use by #ifdef INTERNAL_SYSCALL since not all arch's has INTERNAL_SYSCALL. All arch's not having INTERNAL_SYSCALL in libc/sysdeps/linux/<arch>/bits/syscalls.h should get an update from glibc.
2007-02-12Updates from glibc.Joakim Tjernlund
2007-02-12Rehash the PowerPC e500 port to avoid creating symlinks Joakim Tjernlund
in the powerpc arch code and make more code common with classic PowerPC. From Steve Papacharalambous Lets hope I didn't break something.