| Age | Commit message (Collapse) | Author |
|---|
|
This function haven't have prologue/epilogue/cfi directives etc.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
With time64 enabled we use statx() system call and the appropriate
routines for results conversion. There is no need in `__ts32_struct`
anymore.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
By some reason sparc ld.so cannot work properly with
statx() system call, so fallback to regular stat() family in ld.so.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
Linux kernel returns -1ULL as RLIM64_INFINITY for all cpus.
Fix RLIM64_INFINTIY and 64-bit variant of RLIM_INFINITY macro for
sparc, mips, alpha, as for these CPUs the library uses different
value than what the kernel sets and it can cause incorrect
RLIM64_INFINTY check.
Because alpha is a 64-bit arch, fix the RLIM_INFINITY macro twice
(the value should be the same with and without __USE_FILE_OFFSET64
definition) to match the prlimit64 syscall in the kernel.
Previous implementation of setrlimit/getrlimit functions didn't use
prlimit64 syscall and didn't receive RLIM64_INFINTIY from the kernel,
RLIM64_INFINTY macro was used by the library itself to mimic the
64-bit rlimit in the getrlimit64/setrlimit64 functions, that allowed
to have RLIM64_INFINTIY different from what the kernel sets.
New implementation of setrlimit/getrlimit uses prlimit64 and checks
for RLIM64_INFINITY value and must have equal RLIM64_INFINITY
definition with what the kernel uses.
This issue is indicated by the tst-rlim/tst-rlim64 tests
on sparc/mips32/alpha, tests return 23 (UNSUPPORTED) because of
incorrect RLIM_INFINTY check for available rlimit type.
This patch will require rebuild of sparc/mips32/alpha binaries that
explicitly use RLIM64_INFINTY or 64-bit variant of RLIM_INFINITY
(if binary for 32-bit CPU was built with _FILE_OFFSET_BITS=64) to
update the macro value.
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
There is a real-world usage of RUSAGE_THREAD by the pistache project,
https://github.com/oktal/pistache.
Reported-By: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
This macro exists since Linux 2.6.25 [1] and is defined in glibc
since 2.14 [2] for sparc and most supported architectures.
RLIMIT_RTTIME has been added later for mips [3] and alpha [4].
For example, RLIMIT_RTTIME is needed to build qemu 7.0.0 with
Linux user-land emulation support [5].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=78f2c7db6068fd6ef75b8c120f04a388848eacb5
[2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=67f86a251e0d36107fe28999281d46e76941c7b9
[3] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=8969f4df1a526aa60dd0bc1c4736cf02104d4a05
[4] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=53c2cb7641bd866398156625ef672bbd2d78a0d8
[5] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=244fd08323088db73590ff2317dfe86f810b51d7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
|
|
Since Linux 3.11, O_TMPFILE allows to create unnamed files that can be
linked later on. It is internally defined as (O_TMPFILE | O_DIRECTORY)
to make it fail on old kernels.
Copying definitions from glibc for O_TMPFILE is not enough to support
O_TMPFILE; The open() wrapper also need to pass the mode when the flag
contains O_TMPFILE, otherwise, it will pass mode 000 which will succeed
but yield unexpected results.
openat() is curiously not affected since it passes the mode
unconditionally..
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
|
|
The F_DUPFD_CLOEXEC flag was added in POSIX 2008.09.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
|
|
Rename various spare fields in structs to include a namespace
This should avoid accidental clashes with uses of the __unused symbol
in upstream projects. eg currently it causes a compile error in dhcpcd 8.x
due to their re-use of the __unused symbol as a macro
This follows the style of glibc which does something equivalent
|
|
Similar to glibc commit
https://sourceware.org/git/?p=glibc.git;a=commit;h=6bbfc5c09fc5b5e3d4a0cddbbd4e2e457767dae7
we need to handle Linux kernel change, which removed stat64 family from default syscall set.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Waldemar Brodkorb <wbrodkorb@conet.de>
|
|
The return type of syscall() is long so __syscall_error, which is jumped
to by syscall handlers to stash an error number into errno, must return
long too otherwhise it returs 4294967295L instead of -1L. For example,
syscall for x86_64 is defined in libc/sysdeps/linux/x86_64/syscall.S as
syscall:
movq %rdi, %rax /* Syscall number -> rax. */
movq %rsi, %rdi /* shift arg1 - arg5. */
movq %rdx, %rsi
movq %rcx, %rdx
movq %r8, %r10
movq %r9, %r8
movq 8(%rsp),%r9 /* arg6 is on the stack. */
syscall /* Do the system call. */
cmpq $-4095, %rax /* Check %rax for error. */
jae __syscall_error /* Branch forward if it failed. */
ret /* Return to caller. */
In libc/sysdeps/linux/x86_64/__syscall_error.c, __syscall_error is
defined as
int __syscall_error(void) attribute_hidden;
int __syscall_error(void)
{
register int err_no __asm__ ("%rcx");
__asm__ ("mov %rax, %rcx\n\t"
"neg %rcx");
__set_errno(err_no);
return -1;
}
So __syscall_error returns -1 as a 32-bit int in a 64-bit register, %rax
(0x00000000ffffffff, whose decimal value is decimal 4294967295) and a
test like this always returns false:
if (syscall(number, ...) == -1)
foo();
Fix the error by making __syscall_error return a long, like syscall().
The problem can be circumvented by the caller by coercing the returned
value to int before comparing it to -1:
if ((int) syscall(number, ...) == -1)
foo();
The same problem probably occurs on other 64-bit systems but so far only
x86_64 was tested, so this change must be considered experimental.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
|
|
uClibc-ng don't build with gcc 9.1 [1] due to a new check that
"catch illegal asm constraint usage" [2].
gcc 9.1 print this error:
"invalid hard register usage between earlyclobber operand and input operand"
The asm constraint is present in uClibc since it support sparc (back in 2002)[3].
Note: There is no such constraint is Glibc counterpart code [4].
[1] https://gitlab.com/kubu93/toolchains-builder/-/jobs/205435757
[2] https://github.com/gcc-mirror/gcc/commit/b782636f28f5c378897c238081d28d7a4a6ca578
[3] https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?id=3b6d086531102b6d09ce852feb1e370d5dca3ce9
[4]
+https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/sparc/sysdep.h;h=981b2a26b7a91093f821c97876
+e55bc4be2d9f8a;hb=HEAD
|
|
From glibc commit 9aa5c222b9e0409143410a02b6364a3b25dbf028
[BZ #22919]
|
|
Sync with GNU C library and consolidate duplicate non
architecture specific defines.
MAP_UNINITIALIZED is only defined to 0x4000000 and used by
the Linux kernel when CONFIG_MMAP_ALLOW_UNINITIALIZED is enabled.
CONFIG_MMAP_ALLOW_UNINITIALIZED is only available for nommu.
See Documentation/nommu-mmap.txt.
|
|
Remove enum __ptrace_flags along with the only constant it contains,
PTRACE_SEIZE_DEVEL, from Linux's sys/ptrace.h files.
Following GNU C library commit:
60e2846e2633a990bdf474004a373bde54c0bc5f
|
|
|
|
Sync with GNU C library. Found while trying to compile
linux-rdma to uClibc-ng.
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
|
|
Remove a lot of unused 64 Bit header stuff.
|
|
If you enable these wrappers, be sure you don't need long double
precision on your embedded device, as these only enables
long double warpper functions to the existing double math
functions. Required to build some software as lvm2.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Patch fetched from GNU libc mailinglist.
|
|
Follow GNU C Library from c579f48edba88380635ab98cb612030e3ed8691e
and remove the PID caching. These simplifies the architecture specific
assembly code.
The run of the test suite found no regressions, it even solves
some of the test failures for x86/x86_64/sparc.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
Acked-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
|
|
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
As this is only implemented for a few architecture and not well
tested, just remove it.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
|
|
Ported over from glibc mostly without changes.
Lightly tested with mongrel2 in qemu-system-sparc.
|
|
Both architectures are more or less deprecated.
No Linux upstream support, no gcc support for uClinux.
|
|
Only alpha, hppa and sparc need non-default value.
|
|
I mailed with Jan-Benedict Glaw, it seems VAX on Linux
is really a lot of work todo and uClibc support didn't work ever.
|
|
.globl can be used for every architecture so remove the define.
Sync with GNU C library.
|
|
It's even no longer required for non-ported ppc64
architecture. Sync with GNU C library.
This simplify the macros in include/libc-symbols.h.
|
|
uClibc doesn't define signal info for the SIGSYS signal which is issued
in case of hitting a syscall prohibited by seccomp.
This is sad as it makes debugging seccomp filter policies impossible on
some architectures (at least ARM and PowerPC, maybe also others) which
do not coincidentally set si_value.sival_int as the syscall number.
To fix this, import the definitions and macros needed from glibc.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Otherwise we have a broken scenario with non-threading builds.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Update sys/ptrace.h to latest glibc release for a lot of missing
definitions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The sparc64/sparcv9 code is incomplete. Furthermore there is
no real embedded hardware for sparc64 available, so better remove
it until someone comes up with a complete port.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This reverts commit f51fb26dbcceee9e48d10facc830bd4a549f6cc2.
This fixes linking error for sparc build.
While building a sparc system you get following linking error:
libc/sysdeps/linux/sparc/pipe.S:54: undefined reference to `__GI___errno_location'
Removing the HIDDEN_JUMPTARGET fixes the issue, while using gcc 4.8.3/binutils 2.24.
The definition of __errno_location was changed recently here:
http://git.uclibc.org/uClibc/commit/?id=8f550715c2b211036fc273add3cb5219397ed312
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When using something like this:
$ echo foo|grep foo|wc -l
with mksh shell, you get an runtime error.
Glibc and klibc does not do these extra check.
After removing this check using double pipes work fine.
Tested with Qemu 2.1.0.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Add "__pid_t _tid" member which is used for some packages, like rt-test
for instance, which fails with an error like this one:
src/cyclictest/cyclictest.c:638:9: error: 'union <anonymous>' has no
member named '_tid'
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
As in timerfd.h, eventfd.h needs arch-specific definition files.
alpha, mips and sparc needs separate file, all the other arch
will use common definition.
This problem is already fixed in glibc.
Also sanitize and provide bits for hppa.
Make sure not to install the new bits/eventfd unless eventfd support is
enabled.
Signed-off-by: Hiroaki KAWAI <kawai@stratosphere.co.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The reason truncate64 takes 4 args on some arches is that their ABI
requires 64bit values to be aligned on register pair boundaries.
Since this alignment affects more than just truncate64, rename the
define to properly document its purpose. This also allows us to
expand it to the other impacted syscalls (which will be done in a
follow up commit).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The name was changed to include a trailing 'D' when it went into the
kernel.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This drops __signed, __volatile, and __const. Only the latter was
used in the code base, and for uClibc, not consistently. Much of
the code used plain "const" which meant "__const" was useless.
Really, the point of this is to stay in sync with what glibc did.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This matches a similar change made to glibc.
No functional changes here.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Linux 3.4 added __kernel_long_t and __kernel_ulong_t and various
exported header files were updated to use these new types. Add the
definitions for __kernel_long_t and __kernel_ulong_t to the relevant
kernel_types.h headers.
This change was automated with the following scriptlet
git grep --name-only 'typedef.*__kernel_old_dev_t' \
| xargs sed -i '/typedef.*__kernel_old_dev_t/ a\
typedef long\t\t__kernel_long_t;\
typedef unsigned long\t__kernel_ulong_t;'
Whitespace in arm, avr32, hppa, sparc was then manually fixed up.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
--
Here's a cleaned up patch which should get the whitespace right. I'm a
bit iffy about the sparc changes they make sense to me but it's not a
platform I have access to.
I can break this up per arch or per maintainer if requested.
libc/sysdeps/linux/alpha/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/arm/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/avr32/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/bfin/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/c6x/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/cris/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/e1/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/h8300/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/hppa/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/i386/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/ia64/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/m68k/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/microblaze/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/mips/bits/kernel_types.h | 4 ++++
libc/sysdeps/linux/nios2/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/powerpc/bits/kernel_types.h | 4 ++++
libc/sysdeps/linux/sh/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/sh64/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/sparc/bits/kernel_types.h | 4 ++++
libc/sysdeps/linux/v850/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/x86_64/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/xtensa/bits/kernel_types.h | 2 ++
22 files changed, 50 insertions(+)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
