Age | Commit message (Collapse) | Author |
|
Removing them generally was not a good idea
This reverts commit 233c504cd940d9802226b6a3a092368b86978f5e.
|
|
sed -i -e '/\.size[[:space:]]/d' $(grep -l "\.size" libc/sysdeps/linux/*/crt*.[sSc])
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
* libc/sysdeps/linux/sh/sysdep.h: Add LOCAL macro
* libm/sh/sh4/Makefile.arch: Include asm source in the build
* libm/sh/sh4/s_lrintf.S [NEW]: optimised asm lrintf
* libm/sh/sh4/s_lroundf.S [NEW]: optimised asm lroundf
Signed-off-by: Christian Bruel <christian.bruel@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Instead of emitting a warning even when compiling for SH4, stop
compilation with an #error directive when not on SH4 core.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This patch will re-factor and simplify sysdep headers
handling for nptl branch.
The reason is to use some useful macros in asm code (i.e. ENTRY()) that are available
only into nptl branch because are defined in sysdep.h header under the nptl folder
even if they are not related to NPTL at all (this was likely due to a bad choice done
at the early stage of NPTL porting).
This is a required steps for integrating into master branch some asm code available in
nptl branch for sh4.
The main changes are described below:
nptl/sysdeps/generic/sysdep.h (moved) ---> libc/sysdeps/linux/common/sysdep.h
nptl/sysdeps/arm/sysdep.h (moved) ---> libc/sysdeps/linux/arm/sysdep.h
nptl/sysdeps/sh/sysdep.h ---------------------|
nptl/sysdeps/unix/sh/sysdep.h ----------------|
nptl/sysdeps/unix/sysv/linux/sh/sysdep.h -----|
nptl/sysdeps/unix/sysv/linux/sh/sh4/sysdep.h -|
|(merged) ---> libc/sysdeps/linux/sh
nptl/sysdeps/unix/sysdep.h (deleted)
Similarly the mips and arm sysdep.h should be merged and updated as for sh arch.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
The sh port uses the gcc __set_fpscr internal function, but neither gcc
nor glibc creates a prototype for it. This leads to a bunch of random
warnings about implicit decls during the build.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Most ports have the same exact mman bit defines, so let's unify things
like the linux kernel has with the asm-generic efforts.
A few ports are left behind as they are non-trivial to merge -- the arch
maintainers can tackle it if they care.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
* unified atomic.h compare and exchange macros
* clone.S with RESET_PID support
* sh specific versions of pread/pwrite with cancellation support
* check SHARED instead of PIC
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Recent SH kernel headers merge 32-bit and 64-bit headers, changing the
include guards on asm/posix_types.h in the process; update uClibc code
depending on those include guards.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
Drop the "#ifndef O_CLOEXEC" cruft, enable O_CLOEXEC in most fcntl.h
headers, and import __ASSUME_O_CLOEXEC from glibc.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
sed -i -e '/Experimentally off - /d' $(grep -rl "Experimentally off - " *)
sed -i -e '/^\/\*[[:space:]]*libc_hidden_proto(/d' $(grep -rl "libc_hidden_proto" *)
should be a nop
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This patch makes sufficient modifications to the SH sys/user.h to be
able to build and run gdbserver with Linux kernel 2.6.30.
The problem is that both the kernel and library headers define the same
symbols, thus making it impossible in include both headers. The patch
undefines the kernel symbols in favour of the library symbols.
Signed-off-by: Andrew Stubbs <ams@codesourcery.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This fixes compilation errors on hosts that turn off long double support
for C99 like powerpc32.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Avoid including akefile.commonarch in each Makefile.arch.
Include it instead from Makefile.in just after the arch specific
Makefile.arch
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Fill out the stat structure so that the nanosecond resolution support is
always available. There is a small code size increase for a few ports
(three additional assignments in xstatconv), but otherwise everything
should remain the same.
While we're here, punt __old_kernel_stat from the few headers that still
define it as it is unused in uClibc and causes compile errors after these
nanosecond changes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Declare common NCS (non-constant syscall) variants and convert the existing
ports over to this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Generate PIC relocations when __PIC__ is defined rather than
__HAVE_SHARED__ (like other architectures).
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Unify all the common syscall defines in syscalls-common.h and scrub all
the duplicated code from relevant ports. This should also make converting
existing ports to INLINE_SYSCALL() much easier as they don't have to get
lost in all the unrelated noise, as well as creating new ports.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Make sure each arch has the same complete list to make comparing between
them easier.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
This will generate a Scrt1.o that is linked to executabled
when compiled as PIE code (position independent executable) without
requiring relocation in .text section (not allowed on uclibc/sh4).
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com>
|
|
uclibc config option macros (aligning SH to all other archs).
Changes applied as below:
__CONFIG_SH4__ -> __SH4__
__CONFIG_SH2__ -> __sh2__
__CONFIG_SH2A__ -> __SH2A__
Note: pay attention to capital letters
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
|
|
|
|
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
|
|
__libc_accept __libc_close __libc_connect __libc_creat __libc_creat64
__libc_fsync __libc_lseek __libc_lseek64 __libc_msync __libc_nanosleep
__libc_open __libc_open64 __libc_pause __libc_read __libc_readv
__libc_recv __libc_recvfrom __libc_recvmsg
__libc_send __libc_sendmsg __libc_sendto
__libc_tcdrain __libc_wait __libc_waitpid __libc_write __libc_writev
They were removed from glibc 1 May 2004:
http://sources.redhat.com/ml/libc-hacker/2004-05/msg00001.html
|
|
supports this feature. SH4 will use this in some aseembly files
for the NPTL implementation. Add now safely on trunk.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
|
|
Appears to build fine (several .configs tried)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Closes issue #5194
|
|
__SH_SYSCALL_TRAP_BASE macro.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
|
|
Tested successfully on i386..
|
|
(glibc community refused to apply a my patch for this :-) )
|