summaryrefslogtreecommitdiff
path: root/libc/sysdeps/linux/sh
AgeCommit message (Collapse)Author
2010-02-09nptl: sysdep headers re-factoringCarmelo Amoroso
This patch will re-factor and simplify sysdep headers handling for nptl branch. The reason is to use some useful macros in asm code (i.e. ENTRY()) that are available only into nptl branch because are defined in sysdep.h header under the nptl folder even if they are not related to NPTL at all (this was likely due to a bad choice done at the early stage of NPTL porting). This is a required steps for integrating into master branch some asm code available in nptl branch for sh4. The main changes are described below: nptl/sysdeps/generic/sysdep.h (moved) ---> libc/sysdeps/linux/common/sysdep.h nptl/sysdeps/arm/sysdep.h (moved) ---> libc/sysdeps/linux/arm/sysdep.h nptl/sysdeps/sh/sysdep.h ---------------------| nptl/sysdeps/unix/sh/sysdep.h ----------------| nptl/sysdeps/unix/sysv/linux/sh/sysdep.h -----| nptl/sysdeps/unix/sysv/linux/sh/sh4/sysdep.h -| |(merged) ---> libc/sysdeps/linux/sh nptl/sysdeps/unix/sysdep.h (deleted) Similarly the mips and arm sysdep.h should be merged and updated as for sh arch. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2009-12-03sh: Add a prototype for the gcc __set_fpscr internal functionCarmelo Amoroso
The sh port uses the gcc __set_fpscr internal function, but neither gcc nor glibc creates a prototype for it. This leads to a bunch of random warnings about implicit decls during the build. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2009-11-28Merge remote branch 'origin/master' into nptlAustin Foxley
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2009-11-23bits/mmap.h: unify ala linux asm-generic effortsMike Frysinger
Most ports have the same exact mman bit defines, so let's unify things like the linux kernel has with the asm-generic efforts. A few ports are left behind as they are non-trivial to merge -- the arch maintainers can tackle it if they care. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-17whitespace fixesAustin Foxley
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2009-10-17sh specific bits needed for nptlAustin Foxley
* unified atomic.h compare and exchange macros * clone.S with RESET_PID support * sh specific versions of pread/pwrite with cancellation support * check SHARED instead of PIC Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2009-10-14Fix SH bits/kernel_types.h for new kernel headers.Joseph Myers
Recent SH kernel headers merge 32-bit and 64-bit headers, changing the include guards on asm/posix_types.h in the process; update uClibc code depending on those include guards. Signed-off-by: Joseph Myers <joseph@codesourcery.com>
2009-10-07clean up O_CLOEXEC handlingMike Frysinger
Drop the "#ifndef O_CLOEXEC" cruft, enable O_CLOEXEC in most fcntl.h headers, and import __ASSUME_O_CLOEXEC from glibc. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-18trim Experimentally off and uncommented hiddenBernhard Reutner-Fischer
sed -i -e '/Experimentally off - /d' $(grep -rl "Experimentally off - " *) sed -i -e '/^\/\*[[:space:]]*libc_hidden_proto(/d' $(grep -rl "libc_hidden_proto" *) should be a nop Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-09-17always define float_t as floatBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-09-15sh/user.h: clean up conflicts from kernel user.hAndrew Stubbs
This patch makes sufficient modifications to the SH sys/user.h to be able to build and run gdbserver with Linux kernel 2.6.30. The problem is that both the kernel and library headers define the same symbols, thus making it impossible in include both headers. The patch undefines the kernel symbols in favour of the library symbols. Signed-off-by: Andrew Stubbs <ams@codesourcery.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-08-30honour NO_LONG_DOUBLE_MATHBernhard Reutner-Fischer
This fixes compilation errors on hosts that turn off long double support for C99 like powerpc32. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-07-29build: Include Makefile.commonarch from common Makefile.inCarmelo Amoroso
Avoid including akefile.commonarch in each Makefile.arch. Include it instead from Makefile.in just after the arch specific Makefile.arch Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2009-07-26enable nanosecond stat support for everyoneMike Frysinger
Fill out the stat structure so that the nanosecond resolution support is always available. There is a small code size increase for a few ports (three additional assignments in xstatconv), but otherwise everything should remain the same. While we're here, punt __old_kernel_stat from the few headers that still define it as it is unused in uClibc and causes compile errors after these nanosecond changes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-09syscall(): create a common version based on INLINE_SYSCALL_NCS()Mike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-09syscall: unify part 2: NCS varietyMike Frysinger
Declare common NCS (non-constant syscall) variants and convert the existing ports over to this. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-09sh: Change __HAVE_SHARED__ to __PIC__Peter Griffin
Generate PIC relocations when __PIC__ is defined rather than __HAVE_SHARED__ (like other architectures). Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2009-07-08syscall: unify common syscall definesMike Frysinger
Unify all the common syscall defines in syscalls-common.h and scrub all the duplicated code from relevant ports. This should also make converting existing ports to INLINE_SYSCALL() much easier as they don't have to get lost in all the unrelated noise, as well as creating new ports. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-03uClibc_arch_features: sync defines between portsMike Frysinger
Make sure each arch has the same complete list to make comparing between them easier. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-02sh: add cacheflush syscall wrapperCarmelo Amoroso
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2009-05-05Add position independent code for crt1.S.Carmelo Amoroso
This will generate a Scrt1.o that is linked to executabled when compiled as PIE code (position independent executable) without requiring relocation in .text section (not allowed on uclibc/sh4). Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com>
2009-02-23Use gcc built-in defines for detecting SH cores instead ofCarmelo Amoroso
uclibc config option macros (aligning SH to all other archs). Changes applied as below: __CONFIG_SH4__ -> __SH4__ __CONFIG_SH2__ -> __sh2__ __CONFIG_SH2A__ -> __SH2A__ Note: pay attention to capital letters Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2009-02-20Fix my previous commit to use preprocessor in the right way !Carmelo Amoroso
2009-02-20Fix typo.Carmelo Amoroso
2009-02-20sh: Fix __SH_SYSCALL_TRAP_BASE for SH2A architectureCarmelo Amoroso
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
2008-12-10*: remove some __libc_XXX functions:Denis Vlasenko
__libc_accept __libc_close __libc_connect __libc_creat __libc_creat64 __libc_fsync __libc_lseek __libc_lseek64 __libc_msync __libc_nanosleep __libc_open __libc_open64 __libc_pause __libc_read __libc_readv __libc_recv __libc_recvfrom __libc_recvmsg __libc_send __libc_sendmsg __libc_sendto __libc_tcdrain __libc_wait __libc_waitpid __libc_write __libc_writev They were removed from glibc 1 May 2004: http://sources.redhat.com/ml/libc-hacker/2004-05/msg00001.html
2008-11-27Make __UCLIBC_HAVE_ASM_CFI_DIRECTIVES__ visible in case the archCarmelo Amoroso
supports this feature. SH4 will use this in some aseembly files for the NPTL implementation. Add now safely on trunk. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2008-11-21fix ioperm build problems caused by libc_hidden_proto removalDenis Vlasenko
2008-11-20Last portion of libc_hidden_proto removal.Denis Vlasenko
Appears to build fine (several .configs tried)
2008-11-20next portion of libc_hidden_proto removalDenis Vlasenko
2008-11-15- Remove linux-specific prototypes if asked to.Bernhard Reutner-Fischer
2008-11-15- revert wrong r24049Bernhard Reutner-Fischer
2008-11-15- Remove linux-specific prototypes if asked to.Bernhard Reutner-Fischer
2008-10-28- trim superfluous ';'. No objcode changesBernhard Reutner-Fischer
2008-10-22- remove superfluous ';'. No objcode changes.Bernhard Reutner-Fischer
2008-10-03- add long double math wrappers (Ned Ludd)Bernhard Reutner-Fischer
2008-10-03- use c89-style commentsBernhard Reutner-Fischer
Closes issue #5194
2008-09-25sh: Fix SYSCALL_INST_STRx to work for SH-2[A] core by using theCarmelo Amoroso
__SH_SYSCALL_TRAP_BASE macro. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2008-09-16Add INTERNAL_SYSCALL macros for shCarmelo Amoroso
2008-09-16- add sync_file_range()Bernhard Reutner-Fischer
Tested successfully on i386..
2008-09-04Follow sh asm convention to indent the instruction into the delay slot.Carmelo Amoroso
(glibc community refused to apply a my patch for this :-) )
2008-09-04Kill off the GOT lookup for init/fini in the sh crti.S. This wasPaul Mundt
inversely conditional on __HAVE_SHARED__, which has been broken since the time it was copied in originally. The compiler properly generates the GOT references on its own, negating the entire purpose for the init/fini reference.
2008-08-08Fix SH ldso sequence startup.Carmelo Amoroso
Pass via r4 the rtld finalizer _dl_fini to the user application. This will be the 6^ arg of __uClibc_main and will be registered with 'atexit'. In this way the dynamic linker will be able to call destructors defined within the loaded DSOs. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Add missing 7th arg "stack_end". add comment of undocumented usage of r4. fix comment of expected __uClibc_main() prototype. Signed-off-by: Yoshii Takashi <yoshii.takashi@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org>
2008-07-23- trim any trailing whitespaceBernhard Reutner-Fischer
2008-07-23- fix inline keywordBernhard Reutner-Fischer
2008-07-23- fix asm and volatile keywordsBernhard Reutner-Fischer
2008-07-08sh4 don't need to cope with older RLIMIT implementation.Carmelo Amoroso
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2008-05-03- add missing #endifBernhard Reutner-Fischer
2008-05-03- implement splice,vmsplice,tee for all archesBernhard Reutner-Fischer
- synch F_LINUX_SPECIFIC_BASE related fcntls for all arches
2008-01-17A patch from our Blackfin repository, originally from Jie Zhang. This fixesBernd Schmidt
a problem where the linker was trying to use the wrong symbol name for the init function. Define SYMBOL_PREFIX as _ in Rules.mak for h8300, bfin, i960, microblaze, and v850. Add -D__UCLIBC_UNDERSCORES__ in CFLAGS for targets which define SYMBOL_PREFIX as _. Remove defines and undefs from uClibc_arch_features.h of each target. Add $(SYMBOL_PREFIX) to __uClibc_init when passed by ld option -init.