summaryrefslogtreecommitdiff
path: root/libc/sysdeps/linux/sh64
AgeCommit message (Collapse)Author
2014-08-25fcntl.h: Define F_SETPIPE_SZ and F_GETPIPE_SZKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-04-01libc: rename TRUNCATE64_HAS_4_ARGS to SYSCALL_ALIGN_64BITMike Frysinger
The reason truncate64 takes 4 args on some arches is that their ABI requires 64bit values to be aligned on register pair boundaries. Since this alignment affects more than just truncate64, rename the define to properly document its purpose. This also allows us to expand it to the other impacted syscalls (which will be done in a follow up commit). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-01-10buildsys: use kbuild styleBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-11-18Replace FSF snail mail address with URLsMike Frysinger
This matches a similar change made to glibc. No functional changes here. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-10-02libc/sysdeps: add __kernel_long and __kernel_ulongChris Packham
Linux 3.4 added __kernel_long_t and __kernel_ulong_t and various exported header files were updated to use these new types. Add the definitions for __kernel_long_t and __kernel_ulong_t to the relevant kernel_types.h headers. This change was automated with the following scriptlet git grep --name-only 'typedef.*__kernel_old_dev_t' \ | xargs sed -i '/typedef.*__kernel_old_dev_t/ a\ typedef long\t\t__kernel_long_t;\ typedef unsigned long\t__kernel_ulong_t;' Whitespace in arm, avr32, hppa, sparc was then manually fixed up. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> -- Here's a cleaned up patch which should get the whitespace right. I'm a bit iffy about the sparc changes they make sense to me but it's not a platform I have access to. I can break this up per arch or per maintainer if requested. libc/sysdeps/linux/alpha/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/arm/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/avr32/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/bfin/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/c6x/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/cris/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/e1/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/h8300/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/hppa/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/i386/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/ia64/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/m68k/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/microblaze/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/mips/bits/kernel_types.h | 4 ++++ libc/sysdeps/linux/nios2/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/powerpc/bits/kernel_types.h | 4 ++++ libc/sysdeps/linux/sh/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/sh64/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/sparc/bits/kernel_types.h | 4 ++++ libc/sysdeps/linux/v850/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/x86_64/bits/kernel_types.h | 2 ++ libc/sysdeps/linux/xtensa/bits/kernel_types.h | 2 ++ 22 files changed, 50 insertions(+) Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15cleanup bits/setjmp.h of stuff moved to jmpbuf-offsets.h and jmpbuf-unwind.hPeter S. Mazinger
Make sure we use the new jmpbuf-*.h headers While there, adapt the offset on microblaze and the _JMPBUF_UNWINDS macro on bfin, it seems, these were changed in the meantime. Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-05-10*/crtn.S: Remove .size directive for _init and _finiBernhard Reutner-Fischer
These are split across objects so setting size does not (and never did) work since the expression cannot be computed at assembly time. This avoids errors from recent (> 2.21) gas. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-05-05Revert "*/crt?.S: remove .size directives"Bernhard Reutner-Fischer
Removing them generally was not a good idea This reverts commit 233c504cd940d9802226b6a3a092368b86978f5e.
2011-05-04*/crt?.S: remove .size directivesBernhard Reutner-Fischer
sed -i -e '/\.size[[:space:]]/d' $(grep -l "\.size" libc/sysdeps/linux/*/crt*.[sSc]) Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-03-09bits/kernel_stat.h: no need for _LIBC guard, the file is not installed on targetPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
2009-11-23bits/mmap.h: unify ala linux asm-generic effortsMike Frysinger
Most ports have the same exact mman bit defines, so let's unify things like the linux kernel has with the asm-generic efforts. A few ports are left behind as they are non-trivial to merge -- the arch maintainers can tackle it if they care. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07clean up O_CLOEXEC handlingMike Frysinger
Drop the "#ifndef O_CLOEXEC" cruft, enable O_CLOEXEC in most fcntl.h headers, and import __ASSUME_O_CLOEXEC from glibc. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07fcntl.h: drop unused/dead O_STREAMINGMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-18trim Experimentally off and uncommented hiddenBernhard Reutner-Fischer
sed -i -e '/Experimentally off - /d' $(grep -rl "Experimentally off - " *) sed -i -e '/^\/\*[[:space:]]*libc_hidden_proto(/d' $(grep -rl "libc_hidden_proto" *) should be a nop Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-07-29build: Include Makefile.commonarch from common Makefile.inCarmelo Amoroso
Avoid including akefile.commonarch in each Makefile.arch. Include it instead from Makefile.in just after the arch specific Makefile.arch Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2009-07-26enable nanosecond stat support for everyoneMike Frysinger
Fill out the stat structure so that the nanosecond resolution support is always available. There is a small code size increase for a few ports (three additional assignments in xstatconv), but otherwise everything should remain the same. While we're here, punt __old_kernel_stat from the few headers that still define it as it is unused in uClibc and causes compile errors after these nanosecond changes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-03uClibc_arch_features: sync defines between portsMike Frysinger
Make sure each arch has the same complete list to make comparing between them easier. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-11-20next portion of libc_hidden_proto removalDenis Vlasenko
2008-11-15- Remove linux-specific prototypes if asked to.Bernhard Reutner-Fischer
2008-11-15- revert wrong r24049Bernhard Reutner-Fischer
2008-11-15- Remove linux-specific prototypes if asked to.Bernhard Reutner-Fischer
2008-10-28- trim superfluous ';'. No objcode changesBernhard Reutner-Fischer
2008-09-16- add sync_file_range()Bernhard Reutner-Fischer
Tested successfully on i386..
2008-07-23- trim any trailing whitespaceBernhard Reutner-Fischer
2008-05-03- add missing #endifBernhard Reutner-Fischer
2008-05-03- implement splice,vmsplice,tee for all archesBernhard Reutner-Fischer
- synch F_LINUX_SPECIFIC_BASE related fcntls for all arches
2008-01-17A patch from our Blackfin repository, originally from Jie Zhang. This fixesBernd Schmidt
a problem where the linker was trying to use the wrong symbol name for the init function. Define SYMBOL_PREFIX as _ in Rules.mak for h8300, bfin, i960, microblaze, and v850. Add -D__UCLIBC_UNDERSCORES__ in CFLAGS for targets which define SYMBOL_PREFIX as _. Remove defines and undefs from uClibc_arch_features.h of each target. Add $(SYMBOL_PREFIX) to __uClibc_init when passed by ld option -init.
2008-01-08change NO_UNDERSCORES to just UNDERSCORES so as to be less confusing when ↵Mike Frysinger
doing double negatives
2008-01-08Switch sh64 to use __uClibc_main and the new register layout.Paul Mundt
This was one of the stragglers still bent on __uClibc_start_main utilization, now it's only FR-V.
2008-01-08Bring sh64 support back from the dead.Paul Mundt
2006-12-08Take Mike Frysinger's comments into account -- make certain that userEric Andersen
applications stop using _syscall#() and use syscall() instead. Cleanup internal handling of syscall includes to use the correct header file.
2006-12-06bits/kernel_stat.h is for internal uClibc use only, fix a few otherEric Andersen
minor include file issues
2006-08-25Bump SHMLBA up to a sensible size for dcache alias avoidance to coincide withPaul Mundt
the kernel's get_unmapped_area() behaviour. Ideally this should be more tightly packed based off of the L1 dcache shape, once we're able to handle it through the auxiliary vector.
2006-08-23sync with psm: update errno handling to be the same on all archesMike Frysinger
2006-08-23fixes from psm: hide internal brk symbolsMike Frysinger
2006-07-05fix license noticeMike Frysinger
2006-03-10Remove all non-constant libc_hidden_data_def(), it is too unreliable, sorry, ↵Peter S. Mazinger
most of global data relocations are back
2006-02-01missed two __curbrkPeter S. Mazinger
2006-02-01I will risk this one: __curbrkPeter S. Mazinger
2006-01-26Allow for targets that don't know about signed zero floats."Jan-Benedict Glaw"
2006-01-20move the sh64 code out of the sh headerMike Frysinger
2006-01-19Change to sane defaultsPeter S. Mazinger
2006-01-19move a bunch of arch-specific checks out of common files and into an arch ↵Mike Frysinger
specific header file to make porting/updates a lot easier
2006-01-14make DODEBUG=y happy, update sysdeps/common/* copyrightPeter S. Mazinger
2006-01-14hidden_def/hidden_proto: convert all users (I hope) termios split, add some ↵Peter S. Mazinger
missing headers, other jump relocs removed
2005-12-14Do hidden brk, hide _brk as well for some archs, convert users of brkPeter S. Mazinger
2005-12-13Do hidden sbrkPeter S. Mazinger
2005-11-27define MREMAP_FIXEDMike Frysinger
2005-11-16update copyright and license, add _BITS_SETJMP_H protection around the file, ↵Mike Frysinger
make sure we are only included by setjmp.h and pthread.h, and fix casting of address/jumpbugf in _JMPBUF_UNWINDS
2005-10-12Rewrote almost all Makefiles: do not use strip $(x),y; run strip on all ↵Peter S. Mazinger
objects at once; use :=//$</$^; use CRT_SRC/CRT_OBJ/SCRT_OBJ/CSRC/COBJ/SSRC/SOBJ/MSRC/MOBJ where no more is needed, if only CSRC is present use OBJS directly instead of COBJ; CTOR_TARGETS are created directly in lib; remove unused/unneeded parts. Hope I haven't broken too much.