Age | Commit message (Collapse) | Author |
|
If you enable these wrappers, be sure you don't need long double
precision on your embedded device, as these only enables
long double warpper functions to the existing double math
functions. Required to build some software as lvm2.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
|
|
Follow GNU C Library from c579f48edba88380635ab98cb612030e3ed8691e
and remove the PID caching. These simplifies the architecture specific
assembly code.
The run of the test suite found no regressions, it even solves
some of the test failures for x86/x86_64/sparc.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
Acked-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
|
|
|
|
|
|
|
|
|
|
|
|
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
As this is only implemented for a few architecture and not well
tested, just remove it.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
|
|
ISC bind9 uses ptrsize, better use something else.
Reported-By: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Only alpha, hppa and sparc need non-default value.
|
|
glibc [BZ# 16922]
* sysdeps/mips/sys/asm.h (INT_SUB): Fix definition.
(LONG_SUB): Ditto.
(PTR_SUB): Ditto.
glibc commit 5057ad3b50
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
.globl can be used for every architecture so remove the define.
Sync with GNU C library.
|
|
It's even no longer required for non-ported ppc64
architecture. Sync with GNU C library.
This simplify the macros in include/libc-symbols.h.
|
|
Fixes following compile error, when UCLIBC_HAS_CONTEXT_FUNCS is enabled
on a mips64 build:
CC libc/sysdeps/linux/common/_exit.os
libc/sysdeps/linux/mips/swapcontext.S: Assembler messages:
libc/sysdeps/linux/mips/swapcontext.S:110: Error: Illegal operands `s.d fs6,(30*8+296)($4)'
libc/sysdeps/linux/mips/swapcontext.S:111: Error: Illegal operands `s.d fs7,(31*8+296)($4)'
libc/sysdeps/linux/mips/swapcontext.S:149: Error: Illegal operands `l.d fs6,(30*8+296)($2)'
libc/sysdeps/linux/mips/swapcontext.S:150: Error: Illegal operands `l.d fs7,(31*8+296)($2)'
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
access to the jmp_buf structure occasionally happens asymmetrically:
fields defined in pointer size width (64 on N32) can be accessed as
32-bit words, but in that case, a̲l̲l̲ involved code must agree on that…
|
|
uClibc doesn't define signal info for the SIGSYS signal which is issued
in case of hitting a syscall prohibited by seccomp.
This is sad as it makes debugging seccomp filter policies impossible on
some architectures (at least ARM and PowerPC, maybe also others) which
do not coincidentally set si_value.sival_int as the syscall number.
To fix this, import the definitions and macros needed from glibc.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
https://dev.openwrt.org/browser/trunk/toolchain/uClibc/patches-0.9.33.2/616-mips_fix_stat_time.patch
When booting in Qemu you get for example failures from mdev -s otherwise.
|
|
Rename _timer[12] to si_tid and si_overrun to fix compilation of
strace-4.9+
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This patch fixes the rest of the set-but-not-used warnings in the MIPS
code by using attribute_unused and also fixes some conversion warnings
by changing __arch_compare_and_exchange_xxx_[8|16]_int. Assigning __cmp
(int type) to __prev (pointer type) generates a warning. Assigning zero
to each separately avoids this warning without having to add a cast.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Uclibc is not building for MIPS N64 because pread is trying to use the
pread/pwrite system calls instead of pread64/pwrite64. This patch fixes
the problem and was tested with LFS enabled and disabled.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The INLINE_SYSCALL, INTERNAL_SYSCALL*, and internal_syscall* macros
are defined for MIPS in both libc/sysdeps/linux/mips/sysdep.h and
libc/sysdeps/linux/mips/bits/syscalls.h. The macros are the same
in both cases except that syscalls.h defines internal_syscalls[567]
the same for N32 and N64 ABIs and has a different definition for O32.
I believe that is correct. The sysdep.h header uses the O32 versions
for N32 and has different definitions for N64. I think that is wrong
and that N32 and N64 should share the same definition (modulo the
type 'long' vs. 'long long' for the arguments. This setup (from
sysdep.h) now agrees with what glibc has.
I am not positive about which header (sysdep.h vs syscalls.h) is
really the right one to have these definitions in but using sysdep.h
seems to work for all my builds.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When booting a Linux system with qemu-system-mips64 the execution
of $(pwd) in the ash shell triggers a segmentation fault. Ash uses
setjmp/longjmp for exception handling.
After looking at the glibc implementation,
I found some differences, with this patch tries to resolve.
Now the system boots up fine and no segmentation faults occur.
The global pointer should be restored and the types for the
register values should be wide enough.
See:
http://www.cygwin.com/ml/libc-alpha/2003-03/msg00363.html
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This patch uses 'attribute_unused' to clean up a number of warnings
messages that are generated when doing a MIPS build. All of the
changes are in MIPS specific files and there are no code changes
other then adding the unused attribute where needed.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The MIPS build is failing when UCLIBC_HAS_LFS is set to "n"
because posix_fadvise64.c is included in the build when it
should not be.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
fork() is broken for MIPS64 N64 ABI. You can check it with a simple
C program statically linked with qemu-mips64 user emulation.
Internally fork() is using the clone system call (at least with NPTL)
with 5 arguments. See ./libpthread/nptl/sysdeps/unix/sysv/linux/i386/fork.c.
The calling conventions for MIPS N32 and N64 allow to use up to 8 registers
for that. See http://en.wikipedia.org/wiki/Calling_convention#MIPS
This is correctly implemented in libc/sysdeps/linux/mips/bits/syscalls.h,
but not in libc/sysdeps/linux/mips/sysdep.h. fork.c uses the later one.
It seems that fork() works fine for MIPS64 N32 with just using the stack like
with the O32 case. There is a user of INLINE_SYSCALL with 7 arguments in
libc/sysdeps/linux/common/sync_file_range.c for MIPS64 N32, so I decided to
only use the macros for the MIPS64 N64 case. With this patch my uClibc based
Linux system boots up fine in qemu-system-mips64.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Make __SIGEV_PAD_SIZE to take __WORDSIZE into account for alpha, mips
and ia64 arches.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Add "__pid_t _tid" member which is used for some packages, like rt-test
for instance, which fails with an error like this one:
src/cyclictest/cyclictest.c:638:9: error: 'union <anonymous>' has no
member named '_tid'
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
* Add a common ret_ERRVAL definition
* Remove ret_ERRVAL from architectures using the common 'ret'
* Add 'undef' to architectures that need a different return instruction
* Add '#include <common/sysdep.h>' to cris and ia64 that were missing it
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Prompted by lkml discussion of a MIPS bug where sending
signal 128 was found to be able to crash the machine :/
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
As in timerfd.h, eventfd.h needs arch-specific definition files.
alpha, mips and sparc needs separate file, all the other arch
will use common definition.
This problem is already fixed in glibc.
Also sanitize and provide bits for hppa.
Make sure not to install the new bits/eventfd unless eventfd support is
enabled.
Signed-off-by: Hiroaki KAWAI <kawai@stratosphere.co.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The syscall on 64bit ports takes 4 args as there is no need to split
up the value into two args. Add support for that to the common code.
Once we fix that, the mips code can now leverage it for its 64bit and
32bit needs. However, we can't just drop it entirely yet because its
n32 ABI needs special handling to treat it like a 64bit port. This
does change the existing behavior which treats the n32 like a 32bit
port, but we want to do this.
In the future, we'll probably have to introduce a define for this as
it currently affects x86_64/x32 and mips/n32.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The readahead syscall has the 64bit register align issue for all
arches. Only mips was handling this though.
Clean up the common readahead.c to use the SYSCALL_ALIGN_64BIT
define so that we can throw away the mips version and make this
work correctly on arm/ppc/xtensa.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The 64bit register alignment issue only affects the O32 ABI, so wrap
the define accordingly. We don't want this being used for N32 ABIs.
This doesn't directly affect the N64 ABI since these files wouldn't
even be compiled for those targets (no need for the 32bit/64bit shim).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The reason truncate64 takes 4 args on some arches is that their ABI
requires 64bit values to be aligned on register pair boundaries.
Since this alignment affects more than just truncate64, rename the
define to properly document its purpose. This also allows us to
expand it to the other impacted syscalls (which will be done in a
follow up commit).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The name was changed to include a trailing 'D' when it went into the
kernel.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Add the obsolescent SUSv3 family of user context manipulating functions
for arm, i386, mips, x86_64.
Signed-off-by: Timon ter Braak <timonterbraak@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This drops __signed, __volatile, and __const. Only the latter was
used in the code base, and for uClibc, not consistently. Much of
the code used plain "const" which meant "__const" was useless.
Really, the point of this is to stay in sync with what glibc did.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This matches a similar change made to glibc.
No functional changes here.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Linux 3.4 added __kernel_long_t and __kernel_ulong_t and various
exported header files were updated to use these new types. Add the
definitions for __kernel_long_t and __kernel_ulong_t to the relevant
kernel_types.h headers.
This change was automated with the following scriptlet
git grep --name-only 'typedef.*__kernel_old_dev_t' \
| xargs sed -i '/typedef.*__kernel_old_dev_t/ a\
typedef long\t\t__kernel_long_t;\
typedef unsigned long\t__kernel_ulong_t;'
Whitespace in arm, avr32, hppa, sparc was then manually fixed up.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
--
Here's a cleaned up patch which should get the whitespace right. I'm a
bit iffy about the sparc changes they make sense to me but it's not a
platform I have access to.
I can break this up per arch or per maintainer if requested.
libc/sysdeps/linux/alpha/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/arm/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/avr32/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/bfin/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/c6x/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/cris/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/e1/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/h8300/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/hppa/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/i386/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/ia64/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/m68k/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/microblaze/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/mips/bits/kernel_types.h | 4 ++++
libc/sysdeps/linux/nios2/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/powerpc/bits/kernel_types.h | 4 ++++
libc/sysdeps/linux/sh/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/sh64/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/sparc/bits/kernel_types.h | 4 ++++
libc/sysdeps/linux/v850/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/x86_64/bits/kernel_types.h | 2 ++
libc/sysdeps/linux/xtensa/bits/kernel_types.h | 2 ++
22 files changed, 50 insertions(+)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|