Age | Commit message (Collapse) | Author |
|
relocations.
Make use of macros from sys/asm.h in crt1.S
These two changes are needed for mips nptl to boot once again.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Now that the kernel supports MAP_UNINITIALIZE, have the malloc places use
it to get real uninitialized memory on no-mmu systems. This avoids a lot
of normally useless overhead involved in zeroing out all of the memory
(sometimes multiple times).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Drop the "#ifndef O_CLOEXEC" cruft, enable O_CLOEXEC in most fcntl.h
headers, and import __ASSUME_O_CLOEXEC from glibc.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The kernel does not save these registers across system calls. GCC 4.4
has gotten more aggressive about using them for temporary variables, so
this shows up as intermittent crashes if you use a recent compiler.
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
sed -i -e '/Experimentally off - /d' $(grep -rl "Experimentally off - " *)
sed -i -e '/^\/\*[[:space:]]*libc_hidden_proto(/d' $(grep -rl "libc_hidden_proto" *)
should be a nop
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This fixes compilation errors on hosts that turn off long double support
for C99 like powerpc32.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Right now for ARM, MIPS, Xtensa and powerpc posix_fadvise
routines are included conditionally. They should only be
enabled when UCLIBC_HAS_ADVANCED_REALTIME is set. Also fix
code style in powerpc/posix_fadvise64.c
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Avoid including akefile.commonarch in each Makefile.arch.
Include it instead from Makefile.in just after the arch specific
Makefile.arch
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
I always forget that many arches have their own bits/stat.h ...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Fill out the stat structure so that the nanosecond resolution support is
always available. There is a small code size increase for a few ports
(three additional assignments in xstatconv), but otherwise everything
should remain the same.
While we're here, punt __old_kernel_stat from the few headers that still
define it as it is unused in uClibc and causes compile errors after these
nanosecond changes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
libc/sysdeps/linux/mips/clone.S: Assembler messages:
libc/sysdeps/linux/mips/clone.S:122: Warning: No .frame pseudo-op used in PIC code
libc/sysdeps/linux/mips/clone.S:75: Warning: Pretending global symbol used as branch target is local.
libc/sysdeps/linux/mips/crt1.S: Assembler messages:
libc/sysdeps/linux/mips/crt1.S:134: Warning: No .cprestore pseudo-op used in PIC code
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Declare common NCS (non-constant syscall) variants and convert the existing
ports over to this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Unify all the common syscall defines in syscalls-common.h and scrub all
the duplicated code from relevant ports. This should also make converting
existing ports to INLINE_SYSCALL() much easier as they don't have to get
lost in all the unrelated noise, as well as creating new ports.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Make sure each arch has the same complete list to make comparing between
them easier.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
include/signal.h | 42 +++++++++++++++++++-------------
libc/sysdeps/linux/alpha/bits/signum.h | 19 --------------
libc/sysdeps/linux/common/bits/signum.h | 22 ----------------
libc/sysdeps/linux/hppa/bits/signum.h | 17 ------------
libc/sysdeps/linux/mips/bits/signum.h | 23 +----------------
libc/sysdeps/linux/sparc/bits/signum.h | 20 ---------------
6 files changed, 27 insertions(+), 116 deletions(-)
|
|
Run tested on i386.
|
|
"Bounds Checking Projects... This project has been abandoned"
for four years at least.
|
|
__libc_accept __libc_close __libc_connect __libc_creat __libc_creat64
__libc_fsync __libc_lseek __libc_lseek64 __libc_msync __libc_nanosleep
__libc_open __libc_open64 __libc_pause __libc_read __libc_readv
__libc_recv __libc_recvfrom __libc_recvmsg
__libc_send __libc_sendmsg __libc_sendto
__libc_tcdrain __libc_wait __libc_waitpid __libc_write __libc_writev
They were removed from glibc 1 May 2004:
http://sources.redhat.com/ml/libc-hacker/2004-05/msg00001.html
|
|
|
|
fix _NSIG for it.
better document what's going on in sigaction().
seems to not induce any actual code changes (sans mips).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tested successfully on i386..
|
|
|
|
|
|
|
|
otherwie some errno will be missed (i.e. ENOKEY used in libusb)
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
in string.h and strings.h. This caught unguarded string ops in
libc/inet/ethers.c __ether_line_w() function.
I will wait for fallout reports for a week or so,
then continue converting more libc_hidden_proto's.
|
|
|
|
- synch F_LINUX_SPECIFIC_BASE related fcntls for all arches
|
|
|
|
a problem where the linker was trying to use the wrong symbol name for the
init function.
Define SYMBOL_PREFIX as _ in Rules.mak for h8300, bfin, i960,
microblaze, and v850. Add -D__UCLIBC_UNDERSCORES__ in CFLAGS for targets
which define SYMBOL_PREFIX as _. Remove defines and undefs from
uClibc_arch_features.h of each target.
Add $(SYMBOL_PREFIX) to __uClibc_init when passed by ld option -init.
|
|
doing double negatives
|
|
|
|
This wants a stub_enosys(readahead) line later on, like many, many others need..
|
|
In MIPS syscall(2), .cpload was added to an the error path, but it was
not enough for ABIs other then O32. Use SETUP_GP, SETUP_GP64 and
RESTORE_GP64 to handle all ABIs. This patch fixes an error path of
MIPS pipe(2) too.
|
|
|
|
Current MIPS readahead(), posix_fadvise(), posix_fadvise64() do not
match with kernel on all ABIs.
On O32 ABI, a padding is needed before a long long argument.
On N32/N64, a long long argument should be passed via a single register.
|
|
Daniel Jacobowitz on the mailing list. More information available at <http://www.uclibc.org/lists/uclibc/2007-May/017968.html> .
|
|
When I imported INLINE_SYSCALL, etc. from glibc, I just copied whole
macros for each ABI. Actually, except for argument type (long
vs. long long), internal_syscall[0-4] are identical for all ABI, and
internal_syscall[5-6] for N32/N64 are identical for N32/N64.
And I just disabled FORCE_FRAME_POINTER since it had caused build
failure, but including <alloca.h> can solve it.
Here is a patch to handle these issues, plus asm/__asm__ and
volatile/__volatile__ conversion.
Thanks for Peter S. Mazinger who did basic work of this cleanup.
|