Age | Commit message (Collapse) | Author |
|
add two ioctls to get and set struct epoll_params to allow users to
control epoll based busy polling of network sockets.
added to uapi in commit 18e2bf0edf4dd88d9656ec92395aa47392e85b61 (Linux
kernel 6.9 and newer).
Signed-off-by: Joe Damato <jdamato@fastly.com>
|
|
Commit 48591e2a259d84247ae38f050bd58e6f7450bb77 forgot to update utime.c
resulting in the following riscv32 build failure with applications using
utime such as bzip2:
/home/buildroot/autobuild/instance-0/output-1/host/riscv32-buildroot-linux-uclibc/bin/ld.real: bzip2.o: in function `copyFileName':
bzip2.c:(.text+0x1fcc): undefined reference to `utime'
Fixes: 48591e2a259d84247ae38f050bd58e6f7450bb77
- http://autobuild.buildroot.org/results/2e37d4e0bcef515fe9e643737419bfd26aa2833e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
|
|
Add missing includes and function decls.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
- Include sys/types.h instead of asm/types.h
to prevent types conflict for uClibc typedefs and kernel headers
typedefs.
- Cast 3rd arg of utimensat_time64 syscall to integer type
to avoid compiler's -Wint-conversion error. The error was found
during uClibc compilation for mips32.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
|
|
- Cleanup dl-vdso.c code.
- Pass `void *` as first arg to `load_vdso()`, using 32-bit type
is completely wrong on 64bit architectures.
- Split libc code and vDSO-related code.
Move arch-specific implementations into separate files.
The performance improvement is for example 50-60 times on ARMv7
and about 4 times on x86_64.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
Remove ^L (0x0c) chars from source code.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
|
|
- Use TIME64 by default for rv32, usage of 32-bit time
leads to a lot of incompatibilities with linux kernel 6.6.x and later
versions.
- Add some other corrections to use proper system calls on riscv32
platform.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
With time64 enabled we use statx() system call and the appropriate
routines for results conversion. There is no need in `__ts32_struct`
anymore.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
Previously the common definition of this structure was broken by a mistake.
Restore it correctly for all needed architectures and all use cases.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
To obtain correct `st_atim`, `st_mtim` and `st_ctim` fields
we need to use statx() syscall and then convert the data from the kernel
to the regular stat structure.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
For BE architectures there is one significant difference
in comparison with time64 support for little-endian
architectures like ARMv7.
The difference is that we strictly need to pass two 64bit
values to system calls because Linux Kernel internally uses
`struct __kernel_timespec` and similar, which consists of two
64bit fields.
For this reason many files have been changed to convert
pointers to timespec-family structures (mixed of 64bit and 32bit values)
to the pointer of the similar but 64bit-only structures
for using as system calls args.
This is general prerequisite for any BE architecture.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
This patch introduces *time64 syscalls support for uClibc-ng.
Currently the redirection of syscalls to their *time64
analogs is fully supported for 32bit ARM (ARMv5, ARMv6, ARMv7).
The main changes that take effect when time64 feature is enabled are:
- sizeof(time_t) is 8.
- There is a possibility os setting date beyond year 2038.
- some syscalls are redirected:
clock_adjtime -> clock_adjtime64
clock_getres -> clock_getres_time64
clock_gettime -> clock_gettime64
clock_nanosleep -> clock_nanosleep_time64
clock_settime -> clock_settime64
futex -> futex_time64
mq_timedreceive -> mq_timedreceive_time64
mq_timedsend -> mq_timedsend_time64
ppoll -> ppoll_time64
pselect6 -> pselect6_time64
recvmmsg -> recvmmsg_time64
rt_sigtimedwait -> rt_sigtimedwait_time64
sched_rr_get_interval -> sched_rr_get_interval_time64
semtimedop -> semtimedop_time64
timer_gettime -> timer_gettime64
timer_settime -> timer_settime64
timerfd_gettime -> timerfd_gettime64
timerfd_settime -> timerfd_settime64
utimensat -> utimensat_time64.
- settimeofday uses clock_settime (like in glibc/musl).
- gettimeofday uses clock_gettime (like in glibc/musl).
- nanosleep uses clock_nanosleep (like in glibc/musl).
- There are some fixes in data structures used by libc and kernel
for correct data handling both with and without enabled time64 support.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
|
|
|
|
The tst-rlimit/tst-rlimit64 tests pointed to several issueses in
prlimit() function for 32-bit CPUs. This patch adds name redirection to
prlimit64 in prlimit declaration to provide correct support for 64-bit
offset (_FILE_OFFSET_BITS=64) on 32-bit CPUs and fixes improper field
assignment and incorrect syscall paramerets in the prlimit() function.
Fixes: 8c2f6218 ("setrlimit/getrlimit: fix prlimit64 syscall use for 32-bit CPUs")
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
Fix the [-Warray-parameter=] warning for __sigsetjmp generated by GCC 11 and
later GCC versions:
|
| warning: argument 1 of type 'struct __jmp_buf_tag *' declared as a pointer [-Warray-parameter=]
| extern int __sigsetjmp (struct __jmp_buf_tag *__env, int __savemask) __THROWNL;
| ...
| note: previously declared as an array 'struct __jmp_buf_tag[1]'
| extern int __sigsetjmp (struct __jmp_buf_tag __env[1], int __savemask)
|
Use the same fix as in glibc. The fix is to move the struct __jmp_buf_tag
definition to a separate bits/ header so it can be included in
pthread.h, to allow to use an array (as in setjmp.h) rather than a pointer
in the declaration.
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
Commit 95e38b37 ("add support for systems without legacy setrlimit/getrlimit
syscalls") has added use of the prlimit64 syscall in getrlimit and setrlimit
functions. This change causes memory corruption on getrlimit call for 32-bit
CPUs like ARC, as ARC doesn't have ugetrlimit syscall and uses prlimit64.
Also, setrlimit has been broken by prlimit64 call on 32-bit CPUs like, i386,
ARM, ARC.
For the prlimit64 syscall the kernel expects an rlimit struct with 64-bit fields,
but on 32-bit CPUs without _FILE_OFFSET_BITS=64 the struct rlimit has 32-bit
fields.
Add safe implementations of getrlimit, setrlimit, prlimit for 32-bit CPUs with a
local struct rlimit64 variable for use in the prlimit64 syscall.
For 64-bit CPUs and configurations with _FILE_OFFSET_BITS=64 use
getrlimit, setrlimit, prlimit as aliases to getrlimit64, setrlimit64 and
prlimit64. Add a new function prlimit64.
Tested on aarch64, arm, i386, arc.
Fixes: 95e38b37 ("add support for systems without legacy setrlimit/getrlimit syscalls")
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
Fixes compilation issues on mips64 n32.
|
|
fork() can be implemented using either the fork or clone syscalls on MMU
systems. Therefore the stub is only generated if neither __NR_fork nor
__NR_clone are defined. The stub code manually undefines __NR_fork on
no-MMU systems in an attempt to enable the stub, but this doesn't work
because __NR_clone is still defined. It is not appropriate to undefine
__NR_clone because clone is available on no-MMU, it is just not capable
of implementing fork.
This patch directly enables the fork stub if __ARCH_USE_MMU__ is not
defined. This eliminates the need to undefine __NR_fork, so this code is
removed
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
|
|
Add fstatat wrapper that uses statx for non-legacy arch.
This allows non-legacy arch to opt-out from defining the old stat* syscalls
by not defining __ARCH_WANT_NEW_STAT in their
arch/xxx/include/asm/unistd.h
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Those must have the recent prlimit64 syscall which exists since
Linux 3.2.
This patch is necessary for non-legacy architectures that wish to remove
support for legacy setrlimit/getrlimit syscalls.
The non-legacy arch are those who opt-out via non defining
__ARCH_WANT_SET_GET_RLIMIT in their arch/xxx/include/uapi/asm/unistd.h
setrlimit and getrlimit are then emulated via the new prlimit64 syscall.
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Add missing return value statement to fstat for the statx wrapping case.
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
fstatat64 syscall
Define fstatat64 as a wrapper of statx if the kernel does not support fstatat64 syscall
This is the case for non-legacy architectures that don't define __ARCH_WANT_NEW_STAT
in their linux arch/xxx/include/asm/unistd.h
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
|
|
|
|
|
|
issue with gcc 12
The current definition of __WCHAR_MIN and __WCHAR_MAX are only correct
when wchar_t is an int. This is not the case on ARM/AArch64 where
wchar_t is an unsigned int, or some other architectures where wchar_t
is a long.
The current incorrect definition causes a build issue for example when
building mpd, which uses boost, with gcc 12.x:
In file included from /home/thomas/buildroot/aarch64/host/aarch64-buildroot-linux-uclibc/sysroot/usr/include/boost/integer.hpp:20,
from /home/thomas/buildroot/aarch64/host/aarch64-buildroot-linux-uclibc/sysroot/usr/include/boost/crc.hpp:42,
from ../src/storage/StorageState.cxx:43:
/home/thomas/buildroot/aarch64/host/aarch64-buildroot-linux-uclibc/sysroot/usr/include/boost/integer_traits.hpp:105:69: error: narrowing conversion of ‘-2147483648’ from ‘int’ to ‘wchar_t’ [-Wnarrowing]
105 | public detail::integer_traits_base<wchar_t, WCHAR_MIN, WCHAR_MAX>
| ^
This issue was fixed in glibc in 2013, see bug report
https://sourceware.org/bugzilla/show_bug.cgi?id=15036, and upstream
commit
https://sourceware.org/git/?p=glibc.git;a=commit;h=052aff95782fefe9c63566471063e8b20836bfb8.
Since the i386-specific definition of __WCHAR_MIN and __WCHAR_MAX was
also removed at the same time in glibc, we do the same as part of this
commit.
Reported-by: Clément Ramirez <clement.ramirez@bootlin.com>
With-some-useful-help-from: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
|
|
|
|
Added definition for MAP_FIXED_NOREPLACE which was added in kernel 4.17
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
|
|
|
|
There is a real-world usage of RUSAGE_THREAD by the pistache project,
https://github.com/oktal/pistache.
Reported-By: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
This macro exists since Linux 2.6.25 [1] and is defined in glibc
since 2.14 [2] for sparc and most supported architectures.
RLIMIT_RTTIME has been added later for mips [3] and alpha [4].
For example, RLIMIT_RTTIME is needed to build qemu 7.0.0 with
Linux user-land emulation support [5].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=78f2c7db6068fd6ef75b8c120f04a388848eacb5
[2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=67f86a251e0d36107fe28999281d46e76941c7b9
[3] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=8969f4df1a526aa60dd0bc1c4736cf02104d4a05
[4] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=53c2cb7641bd866398156625ef672bbd2d78a0d8
[5] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=244fd08323088db73590ff2317dfe86f810b51d7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
|
|
|
|
Defined in kernel v3.14, commit
aab03e05e8f7 ("sched/deadline: Add SCHED_DEADLINE structures & implementation")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
|
|
|
|
|
|
Fixes those two warnings:
In file included from <command-line>:
libc/sysdeps/linux/common/openat64.c:18:33: warning: 'openat64' alias between functions of incompatible types 'int(int, const char *, int, ...)' and 'int(int, const char *, int, mode_t)' {aka 'int(int, const char *, int, unsigned int)'} [-Wattribute-alias=]
18 | strong_alias_untyped(__openat64,openat64)
| ^~~~~~~~
./include/libc-symbols.h:177:31: note: in definition of macro '_strong_alias_untyped'
177 | extern __typeof (aliasname) aliasname __attribute__ ((alias (#name))) __attribute_copy__ (name);
| ^~~~~~~~~
libc/sysdeps/linux/common/openat64.c:18:1: note: in expansion of macro 'strong_alias_untyped'
18 | strong_alias_untyped(__openat64,openat64)
| ^~~~~~~~~~~~~~~~~~~~
libc/sysdeps/linux/common/openat64.c:14:12: note: aliased declaration here
14 | static int __openat64(int fd, const char *file, int oflag, mode_t mode)
| ^~~~~~~~~~
and
CC libc/sysdeps/linux/common/stat.os
libc/sysdeps/linux/common/stat.c: In function 'stat':
libc/sysdeps/linux/common/stat.c:28:40: warning: passing argument 3 of 'fstatat64' from incompatible pointer type [-Wincompatible-pointer-types]
28 | return fstatat64(AT_FDCWD, file_name, buf, 0);
| ^~~
| |
| struct stat *
In file included from libc/sysdeps/linux/common/stat.c:11:
./include/sys/stat.h:258:35: note: expected 'struct stat64 * restrict' but argument is of type 'struct stat *'
258 | struct stat64 *__restrict __buf, int __flag)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Since Linux 3.11, O_TMPFILE allows to create unnamed files that can be
linked later on. It is internally defined as (O_TMPFILE | O_DIRECTORY)
to make it fail on old kernels.
Copying definitions from glibc for O_TMPFILE is not enough to support
O_TMPFILE; The open() wrapper also need to pass the mode when the flag
contains O_TMPFILE, otherwise, it will pass mode 000 which will succeed
but yield unexpected results.
openat() is curiously not affected since it passes the mode
unconditionally..
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
|
|
|
|
|
|
copied from musl 1.2.1.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
|
|
Reported-By: akater <nuclearspace@gmail.com>
|
|
Rename various spare fields in structs to include a namespace
This should avoid accidental clashes with uses of the __unused symbol
in upstream projects. eg currently it causes a compile error in dhcpcd 8.x
due to their re-use of the __unused symbol as a macro
This follows the style of glibc which does something equivalent
|
|
|
|
It fixes:
FAIL sem got 1 expected 0
failed: incorrect sem_nsems!
semget(IPC_CREAT) = 0
semctl(k) = 0
sem_nsems = 0
for aarch64.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
|