| Age | Commit message (Collapse) | Author |
|---|
|
warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Rely on the compiler to be properly setup for the default ABI.
When installing-headers, there are two cases:
- NPTL: no issue, a cross-compiler is already expected
- LinuxThreads: no issue, EABI/OABI has no impact on installed headers.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The "use BX" option is now a suggestion that BX be used if available.
Use a macro to detect if BX is available at build time. If so, and
the user requested it be used, then use it. Otherwise, error out.
Macro courtesy Khem RAJ:
http://lists.uclibc.org/pipermail/uclibc/2009-April/042301.html
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This restores the behavior for thumb1 builds and yet uses
the new atomic.h for arm and thumb2 modes.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Thanks to Nitin Garg for notincing!
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
libc/inet/socketcalls.c: In function ‘__libc_recvfrom’:
libc/inet/socketcalls.c:229:1: warning: declaration of ‘_sys_result’
shadows a previous local
libc/inet/socketcalls.c:229:1: warning: shadowed declaration is here
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Most ports have the same exact mman bit defines, so let's unify things
like the linux kernel has with the asm-generic efforts.
A few ports are left behind as they are non-trivial to merge -- the arch
maintainers can tackle it if they care.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Drop the "#ifndef O_CLOEXEC" cruft, enable O_CLOEXEC in most fcntl.h
headers, and import __ASSUME_O_CLOEXEC from glibc.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This fixes compilation errors on hosts that turn off long double support
for C99 like powerpc32.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fill out the stat structure so that the nanosecond resolution support is
always available. There is a small code size increase for a few ports
(three additional assignments in xstatconv), but otherwise everything
should remain the same.
While we're here, punt __old_kernel_stat from the few headers that still
define it as it is unused in uClibc and causes compile errors after these
nanosecond changes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This patch is a uClibc equivalent of
<http://sourceware.org/ml/libc-ports/2008-11/msg00006.html>, to
compute all syscall arguments on ARM in temporary variables before
loading them into register variables. The principle is as for that
glibc patch; the problem I actually observed was a GCC internal
compiler error building ld.so for Thumb-2.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
Declare common NCS (non-constant syscall) variants and convert the existing
ports over to this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Unify all the common syscall defines in syscalls-common.h and scrub all
the duplicated code from relevant ports. This should also make converting
existing ports to INLINE_SYSCALL() much easier as they don't have to get
lost in all the unrelated noise, as well as creating new ports.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Make sure each arch has the same complete list to make comparing between
them easier.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
ustat: same, + remove superfluous "conversion"
which does nothing at best, loses high dev bits at worst
i386/bits/kernel_stat.h: update to reflect reality (wider dev_t)
h8300/bits/kernel_stat.h: same
arm/bits/kernel_stat.h: cosmetics to match kernel header to the letter
|
|
|
|
|
|
|
|
|
|
(75_all_uClibc-arm-ftruncate64.patch from gentoo)
|
|
Tested successfully on i386..
|
|
|
|
Repair C89 compliance and severe whitespace-defects while at it.
|
|
|
|
- synch F_LINUX_SPECIFIC_BASE related fcntls for all arches
|
|
|
|
|
|
The attached patch adds support for compiling arm uClibc as pure Thumb code.
This is needed because some recent ARM codes do not implement traditional ARM
mode. Specifically:
* Cortex-M1 - An extremely minimal FPGA based core that only implements
Thumb-1 (aka ARMv6-M).
* Cortex-M3 - A Thumb-2 only ARMv7-M core.
Most of uClibc already builds in Thumb mode, all that is left are a handful of
assembly bits.
Tested on arm-uclinuxeabi.
|
|
a problem where the linker was trying to use the wrong symbol name for the
init function.
Define SYMBOL_PREFIX as _ in Rules.mak for h8300, bfin, i960,
microblaze, and v850. Add -D__UCLIBC_UNDERSCORES__ in CFLAGS for targets
which define SYMBOL_PREFIX as _. Remove defines and undefs from
uClibc_arch_features.h of each target.
Add $(SYMBOL_PREFIX) to __uClibc_init when passed by ld option -init.
|
|
doing double negatives
|
|
common directory where SHMLBA = __getpagesize()
This patch fixes the issue.
Khem Raj
MontaVista Software Inc.
|
|
|
|
|
|
applications stop using _syscall#() and use syscall() instead. Cleanup
internal handling of syscall includes to use the correct header file.
|
|
minor include file issues
|
|
INTERNAL_SYSCALL macro which saves r7 before making the call and pops it back after return.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
based profiling I nuked ages ago since tools like oprofile are non invasive
and work so much better.
|
|
|
|
|
|
|
