Age | Commit message (Collapse) | Author |
|
Currently crt1 takes address of functions (main,_init,_fini) directly
which doesn't generate truely position independent code, but zero based
values instead. e.g.
| __start:
| ...
| add_s r2,sp,0x4
| mov_s r0, main
generates to
| 000156ec <__start>:
| ...
| 156f4: add_s r2,sp,0x4
| 156f6: mov_s r0,0x15f7c
| ...
| 00015f7c <main>:
| 15f7c: push_s blink
This works just fine for the normal (non PIE) dynamic executables since
they are loaded at address 0. However this is not true for PIE
executables. So for Scrt1 we use a true position independent way when
taking function addresses.
Cc: uclibc@uclibc.org <uclibc@uclibc.org>
Cc: devel@uclibc-ng.org <devel@uclibc-ng.org>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Linux Standard Base specifies section .note.ABI-tag that can be considered
as a marker for ELF files targeted to Linux systems. See
https://refspecs.linuxfoundation.org/LSB_1.2.0/gLSB/noteabitag.html
This section, for example, is used by the GDB to identify Linux ELFs as
compared to baremetal ELFs that do not have this section.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
|
|
Only alpha, hppa and sparc need non-default value.
|
|
.globl can be used for every architecture so remove the define.
Sync with GNU C library.
|
|
It's even no longer required for non-ported ppc64
architecture. Sync with GNU C library.
This simplify the macros in include/libc-symbols.h.
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[updated changelog]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
when building uClibc with -O0 (DODEBUG build) the default sigrestorer
had some extra glue code generated for stack manipulation which was
messing up resume from signal path.
So annotate the function with -Os so that gcc would only generate the
bare min 2 instruction TRAP sequence
Reported-and-Debugged-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This is next gen Instruction Set Architecture from Synopsys and basis
for the ARC HS family of processors.
http://www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor&elq_mid=5732&elq_cid=458802
http://www.synopsys.com/IP/ProcessorIP/ARCProcessors/arc-hs/Pages/default.aspx
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Not relevant anymore since commit e8cc14e59ed3f66b84e,
"libc: rename TRUNCATE64_HAS_4_ARGS to SYSCALL_ALIGN_64BIT"
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
ARC CPU may have MMU page size of 4/8(default)/16k.
uClibc needs to have page size configured accodring to HW it will be run on.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Typically kernel would set the TP register of newly created thread in
clone syscall with CLONE_SETTLS.
However this implies that:
* kernel knows of the exact TP register (which is already different for
ARCompact and ARCv2) and is a detail which becomes part of the ABI
* kernel also needs to handle the unlikely but possible case of !TLS
userspace (e.g. Android libc) case where TP reg is not reserved and
thus need not be mucked with (using ELF personality based detection)
It is better to confine this detail to userspace runtime and set TP reg
right after clone syscall returns.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Native GDB requires elf_fpregset_t to be defined, even if floating point
registers are absent. In this case we use empty structure. Additionally we
redefined prfpregset_t to use this new type.
And there has been an error: it was defined that user_regs_struct has 20
registers, while it has 40.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This showed up due to longstanding test/unistd/clone failure where post
clone, the callback was not exiting and rather falling thru in into main
program.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
- Use syscalls-common.h vers of INTERNAL_SYSCALL / INLINE_SYSCALL_NOERR
- INLINE_SYSCALL takes syscall name (e.g. write)
- {INLINE,INTERNAL}_SYSCALL_NCS macros take syscall num (__NR_write)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Anton reported:
------------------->8---------------------
Package iperf cannot be built in Buildroot due to following error:
/home/akolesov/env/autobuild/tmp/host/usr/bin/arc-buildroot-linux-uclibc-g++
-Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
-pipe -Os --static -o iperf -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 -pipe -Os -pthread -DHAVE_CONFIG_H Client.o
Extractor.o Launch.o List.o Listener.o Locale.o PerfSocket.o ReportCSV.o
ReportDefault.o Reporter.o Server.o Settings.o SocketAddr.o gnu_getopt.o
gnu_getopt_long.o main.o service.o sockets.o stdio.o tcp_window_size.o
../compat/libcompat.a
/home/akolesov/env/autobuild/tmp/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(vfork.os):
In function `vfork':
(.text+0x0): multiple definition of `vfork'
/home/akolesov/env/autobuild/tmp/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/libpthread.a(ptfork.os):ptfork.c:(.text+0xc0):
first defined here
collect2: error: ld returned 1 exit status
------------------->8---------------------
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
crt1.S -> include sysdep.h -> include sysnum.h
In multistage gcc build, Buildroot happens to build crt1.S before
sysnum.h is generated. So break the above include chain and opencode the
ENTRY/END macros.
Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
For this port, I would like to give due credit to:
- Folks from Codito technologies (Sameer, Amit, Kanika, Ramana,...)
who did the very first port
- ARC UK from 2007-2009 (Joern, Irfan, Khurram, Phil...
- Late Brendan Kehoe (may he RIP)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|