| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This commit reverses a change introduced in commit 20554a78a9bba that
split some of the ARC code into two based on whether uClibc was
configured with native threads or not.
The native thread code was updated to use the relocation syntax of
modern binutils, while the non-native code path used a syntax only
accepted in older versions of binutils.
The problem with this is that the choice of old binutils or not is
orthogonal to the choice of native threads or not, and so, inevitably a
user with a recent version of binutils can make the choice to configure
uClibc with non-native thread support, and run into code that will not
assemble.
The solution is either to abandon support for the old tools completely,
or to add a new compile time flag for ARC that is set when the version
of binutils being used is old; this new flag would allow the old
relocation structure to be selected.
In this commit I have simply dropped support for older versions of the
tools.
|
|
This commit adds support for R_ARC_JMP_SLOT relocations during the
bootstrap phase of the dynamic linker. These relocations will be
generated if uClibc-ng is configured with 'DODEBUG=y'.
|
|
Add support for Andes Technology NDS32 architecture.
See here http://www.andestech.com/en/index/index.htm for more
informaton. Verification of the port from an older uClibc
port was done on a sponsored AG101p board.
The testsuite only has 5 errors, three are related to
an existing bug in dlclose() with LT.old, also happening
on cris32 and m68k.
Failures to fallocate/posix_fallocate are unresolved.
Thanks to Andes Technology sponsoring the hardware and
being very helpful while doing the uClibc-ng porting.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Simplify the switch from uClibc to uClibc-ng.
Apps already built against uClibc-0.9.x.y require .so.0
libs to present on target which in case of current uClibc-ng is
not the case and those apps could not be run.
This change creates symlinks from .so.1 to .so.0 for
most of other libs in the same way as it was done by
23e96d89b6ab "ldso: install backward compatibility symlink by default"
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Waldemar Brodkorb <wbx@uclibc-ng.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
|
|
It can happen under certain cases that the DSO had refcount 0,
but was already loaded. (NODELETE flag is set, or it is pulled
in via both NEEDED dependency and explicit dlopen()).
Add extra reference count for NODELETE objects, this will
ensure that the reference count never drops below one.
It is improved version of
http://lists.busybox.net/pipermail/uclibc/2013-June/047826.html
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Previously, DL_OPENED flag was set in libdl only and never used.
Set it centralized in _dl_load_elf_shared_library() & use it in
both ld.so and libdl.
Additionally, rename it to DL_OPENED2 for clarity.
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Nobody should use gcc 3.3 nowadays.
|
|
Even though by default for ARC uClibc gets compiled with
disabled long-calls user may provide UCLIBC_EXTRA_CFLAGS
with "-mlong-calls". With this option uClibc will be
successfully compiled but later it will fail in runtime
because dynamic loader cannot deal with relocations
at least very early on its start.
In particular it will be seen as call to non-relocated
symbol _dl_parse_dynamic_info() which ends-up as a segfault
like this:
------------------------>8--------------------
potentially unexpected fatal signal 11.
Path: /bin/test
CPU: 0 PID: 63 Comm: test Not tainted 4.5.2 #7
task: 9f13f180 ti: 9f166000 task.ti: 9f166000
[ECR ]: 0x00040000 => Insn could not be fetched
[EFA ]: 0x0000283c
[BLINK ]: 0x2000407c
[ERET ]: 0x283c
@No matching VMA found
[STAT32]: 0x8008009e : IE U
BTA: 0x0000283c SP: 0x5fef5ccc FP: 0x00000000
LPS: 0x20004080 LPE: 0x20004064 LPC: 0x00000000
r00: 0x20006684 r01: 0x5fef5db0 r02: 0x00000000
r03: 0x20000000 r04: 0x80808080 r05: 0x2f2f2f2f
r06: 0x41464d00 r07: 0x00000080 r08: 0x000000dd
r09: 0x00000000 r10: 0x00000073 r11: 0x80808080
r12: 0x2000407c r13: 0x20000000 r14: 0x5fef5e74
r15: 0x000ceb3c r16: 0x5fef5e7c r17: 0x5fef5d44
r18: 0x000ceb0c r19: 0xffffffff r20: 0x000ceb1c
r21: 0x00000000 r22: 0x00000000 r23: 0x000d08a5
r24: 0x00000000 r25: 0x80808080
Segmentation fault
------------------------>8--------------------
Solution to this issue is simple we make sure dynamic
loader never gets compiled with "-mlong-calls" by forcing
"-mno-long-calls" on it.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
|
|
With new binutils supporting DT_RELACOUNT, ldso was crashing as it was
parsing relocs incorrectly.
Apparently that code ran for first time and was never tested.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
|
|
License notices in most of the source files refer to an outdated
FSF address. Replace it with URL, like in the rest of the source
files.Signed-off-by: Nikola Forró <nforro@redhat.com>
|
|
Avoids following linking error:
/usr/lib/gcc/arm-openadk-linux-uclibceabihf/5.3.0/libgcc.a(unwind-arm.o):
In function `unwind_phase2':
../w-gcc-5.3.0-1/gcc-5.3.0/libgcc/unwind-arm-common.inc:289:
undefined reference to `abort'
/usr/lib/gcc/arm-openadk-linux-uclibceabihf/5.3.0/libgcc.a(unwind-arm.o):
In function `unwind_phase2_forced':
../w-gcc-5.3.0-1/gcc-5.3.0/libgcc/unwind-arm-common.inc:346:
undefined reference to `memcpy'
collect2: error: ld returned 1 exit status
|
|
Booting on Lemote Yeelong with a page size != 4kb
ld.so is crashing and failed to load libc.so.
Do not hardcode the offset for n64 ABI.
|
|
The FR-V port is really broken, and I have no emulator
or hardware for this platform. I tried to get some hardware
from RedHat, who made the FR-V port initially. Unfortunately
Fujitsi didn't agreed to sent me some of their unused spare
hardware lying @RedHat. As I invested some time to get stuff compiled,
I decided to add the code and may be anytime later I can gain
access to some emulator or hardware.
GDB simulator for FR-V doesn't support booting Linux AFAIK.
|
|
Implement single rtld_flags interpretation through all the
do_dlopen()/_dl_load_shared_library()/_dl_load_elf_shared_library()
calls chain.
This adds the ability to use the flags, passed to dlopen(), in all
underlaying functions and implement rtld_flags inheritance.
Saves a few bytes code.
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
$ORIGIN expansion in search_for_named_library() wrongly
takes into account all bits of rflags.
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
If RTLD_NODELETE is passed to dlopen() rather than set on shared
library itself, flag propagation to rtld_flags is missed.
Test-case taken from glibc.
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
The R6 version of MIPS does not support the bltzal instruction. This
patch changes dl-startup.h and dl-sysdep.h to use lapc on R6 instead.
lapc is a new R6 insruction so older systems need to continue to use
bltzal in order to load register $31.
Signed-off-by: Steve Ellcey <sellcey@imgtec.com>
|
|
Patch is from Timo Teras
Refs.:
http://lists.uclibc.org/pipermail/uclibc/2012-October/047059.html
http://git.alpinelinux.org/cgit/aports/tree/main/libc0.9.32/uclibc-dlclose-fix.patch
|
|
No real hardware available. The project for sh64 with sh5 seems
dead since 10 years. Gcc will remove support for it soon.
|
|
An abort() is only generated when gcc does not implement
a trap handler for the target architecture.
This fixes the abort() generation. Latest gcc git master
also contains a trap handler for xtensa.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Walemar Brodkorb <wbx@uclibc-ng.org>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Enable ia64 in the menu.
Fix build for architectures withou ld.so support.
Fix syntax error in bits/byteswap.h.
|
|
Information about Openrisc:
http://opencores.org/or1k/Main_Page
Integrated from:
https://github.com/openrisc/uClibc-or1k
|
|
Most changes are mechanical replacement of 'retw' instruction with
'abi_ret' macro, defined to 'retw' or 'ret' according to ABI.
Assembly code that makes calls is duplicated for call0 ABI with changed
register numbers for parameters/return value and call instruction.
'entry' instructions are replaced with 'abi_entry' macro.
More interesting changes:
- non-leaf assembly functions (e.g. _dl_tlsdesc_dynamic,
_dl_linux_resolve, SYSCALL_ERROR_HANDLER, PSEUDO) now need to preserve
registers around intermediate calls they make, use temporary stack
frame for that;
- setjmp/longjmp only need to save and restore return address, stack
pointer and callee-saved registers in the jmpbuf;
- __clone and syscall functions had hardcoded offsets to parameter
passed on stack, on call0 ABI they don't need stack frame, so the
offset is different. Replace these offsets with FRAMESIZE macro.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Simplify the switch from uClibc to uClibc-ng suggested
by Alexey Brodkin <Alexey.Brodkin@synopsys.com>.
Gcc always uses .0 ld.so link, so install it by default.
|
|
This reverts commit f52fb21a7af0aa4e983b3e6c2ddd1b6a526b5169.
Totally wrong patch.
|
|
Simplify the switch from uClibc to uClibc-ng suggested
by Alexey Brodkin <Alexey.Brodkin@synopsys.com>.
Gcc always uses .0 ld.so link, so install it by default.
|
|
|
|
|
|
Fixes segfaults when gcc 5.1 is used for x86.
http://git.uclibc.org/uClibc/commit/ldso/ldso/i386/dl-sysdep.h?h=ldso-future&id=7de778389d0040be4a21ffc326310e0eb361570a
Mentioned in #uclibc.
|
|
Patch seen here:
http://lists.uclibc.org/pipermail/uclibc/2015-April/048892.html
|
|
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
There seems to be a bug in gold with static TLS at least on x86_64 (?)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
in early debugging code
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
|
|
The nostartfiles is redundant but better be safe
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
|
|
|
|
|
|
For avr32 we still use gcc 4.4 compiler, so exlude the usage
of __builtin_unreachable here.
|
|
This reverts commit 69ba9dcaa13bb8bbdc8630265d73298c39945416.
|
|
No need to build crt when just generating headers
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
No need to build crt when just generating headers
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
|
|
The R_ARC_NONE relocation is generated when --gc-sections, used by the
compile time linker, removes some sections. This is completely normal,
and we can see that all other targets (based on random sampling) have
support for R_*_NONE relocations (named for each target).
Handling R_ARC_NONE involves doing nothing with it, which is nice and
easy.
Signed-off-by: Andrew Burgess <andrew.burgess@embecosm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Otherwise gcc might not understand that oom() ended control-flow and
might emit an (untaken) reference to abort() in _dl_update_slotinfo()
on e.g. SH4 which breaks linking ld-uClibc.so.
Arguably -ffreestanding should prevent GCC from emitting this
'.global abort' but alas, it does not, which is another bug..
Also mark the function cold to further lower the incoming frequency and
branch probability.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
