| Age | Commit message (Collapse) | Author |
|---|
|
|
|
matters for NPTL libpthreads to work. Well, that was a nice waste of 3 hours.
|
|
http://uclibc.org/lists/uclibc/2005-October/012809.html
This will only fix powerpc. Should be easy to fix the other arches.
|
|
fstat64, but I am sure someone will
tell me.
|
|
|
|
|
|
|
|
Word (and it will truncate addresses on 64bit hosts)
|
|
|
|
|
|
bitsize
|
|
|
|
|
|
RPATH sematics changed to match RUNPATH. Only difference is
that RPATH is searched before LD_LIBRARY_PATH and RUNPATH
after. This is not complete but better than the current mess(I think).
|
|
|
|
|
|
where possible. This will also make ldso smaller.
However the patch touches all archs and I have only tested PPC and x86.
|
|
Add elf_machine_dynamic() and elf_machine_load_address() for
all archs. elf_machine_dynamic() replaces the #ifdef mess to
get at the GOT. elf_machine_load_address() is needed to execute
ldso directly, this is not complete yet.
I probably broke one or two archs(only tested PPC) so please
try and report problems. For a report to be useful you need
to enable __SUPPORT_LD_DEBUG_EARLY__ and __SUPPORT_LD_DEBUG__
|
|
|
|
- Replace all open coded dynamic handling with a function. Reduces size.
- Fold special MIPS dynamic code into the dynamic_info item.
- Add RELRO support.
- Support linking with "-z now".
- prepare for DT_RELACOUNT/DT_RELCOUNT optimization.
- Add -z now to ld.so linking, this is what ld.so does anyway so
let the linker know that.
|
|
with them.
|
|
|
|
Remove definition of _dl_parse_copy_information() for powerpc.
Remaining archs can do the same.
Make debugging output of "relocation processing: xxx" a bit more sane.
|
|
|
|
dl-cache.h and make use of it. Also disables the lib-path-redundancy check
for the case the cache is not used. Makes use of _PRELOAD_FILE_SUPPORT.
From Peter Mazinger.
|
|
From Peter Mazinger.
|
|
Mazinger implements the changes suggested by me on the uclibc list.
On Tuesday 28 September 2004 02:24 pm, Erik Andersen wrote:
> What I think should be done is
>
> *) Someone that cares about USE_CACHE should fix that option
> up to be sure it works, and give it a proper config entry
> in extra/Configs/Config.in, and rename it to something
> more appropriate such as LDSO_CACHE_SUPPORT.
>
> *) When LDSO_CACHE_SUPPORT=n, UCLIBC_RUNTIME_PREFIX /usr/X11R6/lib
> should be included in the default library search path in
> dl-elf.c, ldd, and ldconfig.
>
> *) When LDSO_CACHE_SUPPORT=y, UCLIBC_RUNTIME_PREFIX /usr/X11R6/lib
> should be excluded from the default library search path in
> dl-elf.c, ldd, and ldconfig, and those wishing to include
> X11 stuff should add that into /etc/ld.so.conf and re-run
> ldconfig.
>
> *) At present, LDSO_CONF and LDSO_CACHE use the same names
> and same structure as glibc. This precludes
> LDSO_CACHE_SUPPORT being uses in any sane fashion on a
> dial glibc and uClibc system. Just as it was necessary
> for use to use a different name for 'libuClibc' rather
> than 'libc', and 'ld-uClibc.so.0' rather than
> 'ld-linux.so.2' it seems that these configuration files
> really ought to be given different names.
>
|
|
Search in UCLIBC_RUNTIME_PREFIX"lib" before
UCLIBC_RUNTIME_PREFIX"usr/lib".
X11 users should enable USE_CACHE in Rules.mak, add
/usr/X11R6/lib to /etc/ld.so.conf and run ldconfig.
|
|
Someone needs to test if it works to build and run gcj.
|
|
Remove unused function parameter in ldso.
Remove echo option '-e' since it is not supported on Solaris.
|
|
is needed if ldso should use libcs malloc whenever possible.
Fix RTLD_LAZY propagation to RTLD_NOW relocation when requested by
libdl.
|
|
i was sticking some libraries in non-standard (i.e. not-hardcoded) paths and
then updating ld.so.conf accordingly ... oddly though, i couldnt get binaries
that linked against those libraries to run ... `ldconfig -v` showed the
required libraries being detected/cached, so something seemed wrong ...
turns out the libraries were being tagged as LIB_ELF_LIBC0 in the cache and
the loader currently only accepts LIB_ELF_LIBC{5,6} ... since readsoname.c in
ldconfig defines needed_tab with the mapping 'libc.so.0' -> LIB_ELF_LIBC0 it
seems like the loader should accept this type too
find attached a small patch which adds LIB_ELF_LIBC0 along side
LIB_ELF_LIBC{5,6} as an accepted lib type in the loader when dealing with the
ld.so.cache file
|
|
PPC32, SPARC32/64 and S390 includes the PLT in its RELA size. This caused ldso
to always do unlazy relocation of the JMPRELs. This patch fixes it.
|
|
rather than _dl_malloc, fprintf rather than _dl_printf, etc.
-Erik
|
|
|
|
tree. Bad boy, No doughnut.
-Erik
|
|
aligned pointer that may be aligned up to page_size. Also add _dl_free,
|
|
Hello,
I managed to get ldso (and thus shared linking to uClibc) to work on
sparc (actually sparc64 kernel with 32-bit userspace), at least on
simple "hello world" program (more complex ones not tested).
Some notes on attached patch (against 0.9.26, would require some work
to apply on current CVS - but I tested 0.9.26, not CVS):
- ELF magic cannot be examined by _dl_strncmp so early, probably because of
string constant, like on ppc/mips/sh
(note that early SEND_STDERR still crashes when trying to do _dl_strlen
- I suppose that string constants require relocation; but adding
load_addr didn't help, just ELF header was displayed instead of crash)
- mmap() is syscall6 like on ppc/mips/sh, not old i386 mmap()
- for generic sparc (i.e. not sparcv8/sparcv9) gcc produces .udiv/.urem
calls for unsigned integer / and % operators - so these operations
must be avoided. I copied do_rem definition from arm header.
But / and % are used also in _dl_simple_ltoa() and
_dl_simple_ltoahex(); in ltoahex gcc optimizes it to shifts (but
I think it's safer to use shifts explicitly, not rely on
optimization...).
I changed % in ltoa to do_rem, but as there was no do_div definition,
I changed all "%d" specifiers to "%x" to avoid crashes (this changes
wouldn't be needed if _dl_simple_ltoa() were fixed to not use
division on sparc).
- "#define SOLARIS_COMPATIBLE" in ld_sysdep.h broke ldso on Linux
because of redefining _dl_linux_resolve only in some places (it was
still referenced in INIT_GOT before redefinition). So
_dl_linux_resolve redefinition should be moved before INIT_GOT
definition or removed.
- sparc64 kernel requires mmap() addresses to be aligned to 8192, not
4096, otherwise mmap() call failed
- reloc_entry must be shifted by 10, not 12 (I found similar operation
in glibc sources)
Aside of sparc-specific fixes:
- I moved some _dl_dprintf()s inside if(_dl_debug_*) conditions (to avoid
debugging messages when LD_DEBUG is not defined)
- it seems that there was possible off-by-one in ltoa and ltoahex?
they are called with char[22] as 1st argument, and then '\0' is stored
in local[22] (_before_ p decrementation)... or am I missing something?
If not, fix is included in patch.
|
|
by extracting the value from the ELF header.
|
|
|
|
sensible -1 fd, rather than pretending to work off of fd 0, which makes
absolutely no sense.
|
|
Hi it is me again.
This is the latest ldso patch. the NEW weak symbol handling works now
with a little special handling in _dl_find_hash(). You get to chose
if you want the new or old handling :)
There was 2 missing _dl_check_if_named_library_is_loaded() calls in _dlopen().
I then disabled the _dl_check_if_named_library_is_loaded() in dl-elf.c since
it is rendundant.
Question, why does some _dl_linux_resolver(), like i386, have 2 calls
to _dl_find_hash()? I think that is wrong, isn't it?
I really hope you can check this out soon ...
|
|
|
|
till I properly finish the next step in my evil plan.
|
|
location for this stuff
|
|
|
|
|
|
|
|
|
|
|
