| Age | Commit message (Collapse) | Author |
|---|
|
like
o UCLIBC_HAS_GNU_ERROR
o UCLIBC_HAS_BSD_ERR
o UCLIBC_HAS_PTY
o UCLIBC_HAS_GETPT (1)
o UCLIBC_SYSCALL_STUBS
o UCLIBC_SYSCALL_STUB_WARNING
o UCLIBC_LINUX_SPECIFIC (2)
o UCLIBC_BSD_SPECIFIC (3)
o UCLIBC_NTP_LEGACY (4)
o UCLIBC_SV4_DEPRECATED (5)
o UCLIBC_HAVE_REALTIME (6)
o UCLIBC_HAVE_ADVANCED_REALTIME (7)
o UCLIBC_HAVE_EPOLL (8)
o UCLIBC_HAVE_XATTR (9)
o UCLIBC_HAVE_PROFILING (10)
(1) make non-standard getpt optional and implement standard posix_openpt
(2) fstatfs(), inotify_*(), ioperm(), iopl(), madvise(), modify_ldt(),
personality()
ppoll(), setresuid()
(3) mincore(), getdomainname(), setdomainname()
(4) ntp_adjtime(), ntp_gettime() aliases
(5) ustat() [use statfs(2) in your code instead]
(6) All marked as "(REALTIME)" in SUSv3
(7) All marked as "(ADVANCED REALTIME)" in SUSv3
(8) epoll_create(), epoll_ctl(), epoll_wait()
(9) all Extended Attributes
(10) helpers for gcc's -finstrument-functions
- Fixes _dl_exit()
- Implements sleep(3) for !UCLIBC_HAVE_REALTIME
- Implements usleep(3) for !UCLIBC_HAVE_REALTIME
- adds #warning about incorrect posix_fadvise{,64}()
- removes unused and unwanted uselib()
Net outcome is that an allnoconfig with HAVE_SHARED is now about 88k instead
of formerly 130k.
|
|
with HAVE_SHARED
|
|
|
|
top-level Makefile.in: add TODO
|
|
These are source files built on the host.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
|
|
were removed in linux-2.6
|
|
- 79 0 28 107 6b libc/inet/rpc/create_xid.o
+ 76 0 25 101 65 libc/inet/rpc/create_xid.o
- 126 0 4 130 82 libc/misc/assert/__assert.o
+ 123 0 1 124 7c libc/misc/assert/__assert.o
- 648 4 24 676 2a4 libc/misc/internals/__uClibc_main.o
+ 645 4 21 670 29e libc/misc/internals/__uClibc_main.o
- 230 0 4 234 ea libc/stdlib/abort.o
+ 216 0 1 217 d9 libc/stdlib/abort.o
- 129 0 4 133 85 libc/termios/tcgetsid.o
+ 126 0 1 127 7f libc/termios/tcgetsid.o
|
|
* extra/locale/gen_wc8bit.c: use strrchr to parse locale
name to handle the case in which it contains a '.' character
like ANSI_X3.4-1968
* include/locale.h: use __UCLIBC_HAS_XLOCALE__ to control
inclusion of xlocale.h only
* libc/misc/ctype/ctype.c: add missing weak_alias for
__tolower_l and __toupper_l
* libc/misc/locale/locale.c: use strcasecmp (case insensitive)
for utf-8 locale name.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
for 2.4 kernels.
|
|
It is "make install_kernel_headers" now.
|
|
|
|
Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com>
|
|
|
|
|
|
installed in target dir, and dont try to copy them again
|
|
Now it uses dedicated script instead of inline makefile commands,
which helps readability.
It also installs asm[-generic] and linux subdirs from kernel headers
(previously it had to be done separately).
Lastly, it passes each uclibc header thru unifdef, which strips
#ifdef UCLIBC_INTERNAL conditional from headers.
Currently it's a no-op (no such #ifders in tree).
The plan is to have libc_hidden_proto(foo) migrated to headers
and guard them by these #ifdefs.
|
|
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
|
|
|
|
The attached patch adds support for compiling arm uClibc as pure Thumb code.
This is needed because some recent ARM codes do not implement traditional ARM
mode. Specifically:
* Cortex-M1 - An extremely minimal FPGA based core that only implements
Thumb-1 (aka ARMv6-M).
* Cortex-M3 - A Thumb-2 only ARMv7-M core.
Most of uClibc already builds in Thumb mode, all that is left are a handful of
assembly bits.
Tested on arm-uclinuxeabi.
|
|
|
|
|
|
for i386. UCLIBC_HAS_FENV
|
|
|
|
The following patches add support for the Xtensa processor architecture
to uClibc. They are based on a recent SVN checkout (12/05/2007).
The first patch (attached to this post) adds Xtensa support to various
shared configuration and make files. The following patches then include
the Xtensa specific files and directories.
I welcome any feedback and would appreciate it if you could include the
patches into the mainline tree. I am certainly committed to maintain the port.
Bob Wilson was kind enough to review the patches.
Some notes about the architecture: Xtensa is a configurable and
extensible processor architecture developed by Tensilica. For more
information, please visit: www.linux-xtensa.org.
|
|
sys_errlist[] to strerror()
|
|
I had occasion to look at the uClibc script "getent" and felt compelled to clean out the cargo-cult programming style. I believe that this version is clearer, and I've added some minor features while I was in there:
* usage clause, if no arguments or "--help" requested
* original version appears to have been intending to "exit 2" on failure to match, but didn't
* basic, probably good enough, support for ethers and netgroups
* faster ;-) [as if that matters for this script]
|
|
<hcegtvedt@atmel.com>
|
|
|
|
|
|
On cygwin one has to pass
make menuconfig HOST_LOADLIBES="-lcurses -lintl"
otherwise just curses is linked in and some symbols that live in intl are
unresolved. Closes #1554 and possibly a couple of other reports.
|
|
|
|
to copy relocs
|
|
|
|
|
|
|
|
|
|
|
|
* Add configurable buffer sizes for getpwnam() and getgrnam().
The default buffer size is, as before, 256 (glibc seems to use
1024 by default).
|
|
|
|
|
|
via system(). Also move it to extra/scripts since it's a uClibc
build script, not part of upstream kconfig. Adjust the "grabbing a new
kconfig snapshot" procedure accordingly.
|
|
written into the resulting .config, so remove it.
|
|
|
|
|
|
|
|
|
|
|
|
|
