Age | Commit message (Collapse) | Author |
|
Follow the steps to build c-sky uclibc linux system:
1. git clone https://github.com/c-sky/buildroot.git
2. cd buildroot
3. make qemu_csky_ck810_uclibc_defconfig
4. make
Follow the buildroot/board/qemu/csky/readme.txt to run.
This buildroot toolchain is pre-build, But you can rebuild
the c-sky uclibc-ng alone and install it to the buildroot
sysroot manually.
We'll try our best to improve the uclibc-ng continuously.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
In cde74b83f9b2 "ARC: remove special CFLAGS/LDFLAGS handling" we
got rid of CONFIG_ARC_CPU_HS which was used to select ARCv2-specific
implementation of optimized string routines. So now ARCv2-tuned
memset/memcpy/strcmp are not used, instead those for ARC700 used for
both ARC700 and ARCHS.
Without uClibc config option we may only tell which CPU type we're
targeting by built-in defines of GCC. I.e. no more conditional file
inclusion in Makefiles. That leaves us only one option - merge both
implementations in 1 file and use ifdefs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
|
|
Ensure to always allow a build and fallback to C.UTF-8
and even C.
Signed-off-by: Eugene Yudin <e.yudin@ndmsystems.com>
|
|
The function towlower doesn't work with locales different from C.
Issue was introduced in commit: 8cde3a9bf2856dcb9a759dec7ecb04a68e712254
Call to setlocale is needed for correct generation of the table uplow_diff.
Otherwise you receive compile time error "range assumption error" after
uncommenting the call.
Similar problem described here:
http://lists.uclibc.org/pipermail/uclibc/2015-March/048852.html
This commit fix the problem by using int32_t values.
|
|
No NPTL, no LDSO support.
Bootup with Busybox Ash in Qemu working.
Testuite shows only two failures, but mksh continue/break
support doesn't work.
|
|
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
|
|
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
If you enable these wrappers, be sure you don't need long double
precision on your embedded device, as these only enables
long double warpper functions to the existing double math
functions. Required to build some software as lvm2.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
Either toolchain defaults or buildsystems should provide the
architecture specific CFLAGS and LDFLAGS.
|
|
The included RPC implementation is ipv4 only.
Other C library projects have either deprecated the internal
RPC implementation (GNU C Library) or never implemented such
functionality (musl C Library). The latest rpcbind release (0.2.4)
checks for libtirpc and does not allow to be build with uClibc-ng
RPC without patching. The common use case for RPC nowadays is to
use rpcbind together with nfs-utils to provide NFS server or client
support to a system.
The included RPC implementation does create issues with duplicate
symbol failures when statically compiling with RPC enabled.
|
|
Ported over from GNU C Library and runtime tested in Qemu.
|
|
Otherwise, buildroot rejects uClibc-ng in an external toolchain.
Signed-off-by: Alexey Neyman <stilor@att.net>
|
|
This commit includes following features.
1. Support NPTL/TLS
2. Add libm function which is used to handle FP rounding and excpetions
(ex: fclrexcpt,fedisblxcpti,feenablxcpt... )
3. Add *context function for operating user context
(ex: setcontext,getcontext,makecontext... )
4. Change the return flow from signal handler
5. Cleanup of old code
The testsuite only has 2 errors, tst-cpuclock1 and tst-cputimer1,
which are related to timing accuracy. (math and locale tests are disabled)
Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com>
|
|
|
|
|
|
|
|
The syscall wrappers are not required and other C libraries
do not provide them. Busybox modutils.c must be patched so
that syscall() is used for uClibc-ng.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
Remove __UCLIBC_HAS_OBSTACK__ as it isn't very uptodate and
maintained part. It shouldn't be required for any software and
mostly shipped with stuff which use it. (f.e. binutils-gdb)
|
|
This option is enabled for a long time and I see no
useful case where we should be incompatible to glibc here.
|
|
These adds the stubs from gettext-tiny 0.0.5
from here:
https://github.com/sabotage-linux/gettext-tiny
|
|
To use it enable UCLIBC_HAS_LIBICONV, then iconv_open/iconv_close
should be available.
|
|
|
|
|
|
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Only static linking is supported for now.
More debugging and analyzing for ld.so, TLS and NPTL
is required. But at least you can bootup a static
root fileystem in Qemu.
|
|
Not perfect, but a starting point.
Some tests of the test suite are failing.
|
|
To analyze or debug any linuxthreads problems it is useful to
have the ability to have a full gdb on the target available.
At the moment you could only debug stuff on microblaze.
Now we can verify that linuxthreads are working fine for
every supported architecture.
|
|
|
|
|
|
|
|
Enable locale application to be build when utils are
build. Remove useless compile and link warnings.
Default to minimal locale builds.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
A single test with targeting ARM showed that this feature
seems bit rotted. Remove DOMULTI and simplify Makefiles.
|
|
|
|
Signed-off-by: Martin Thomas <mtdev@hamtam.de>
|
|
Add support for Andes Technology NDS32 architecture.
See here http://www.andestech.com/en/index/index.htm for more
informaton. Verification of the port from an older uClibc
port was done on a sponsored AG101p board.
The testsuite only has 5 errors, three are related to
an existing bug in dlclose() with LT.old, also happening
on cris32 and m68k.
Failures to fallocate/posix_fallocate are unresolved.
Thanks to Andes Technology sponsoring the hardware and
being very helpful while doing the uClibc-ng porting.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Select required features. Fix intendation.
Reported-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Nobody should use gcc 3.3 nowadays.
|
|
|
|
There exist some problem with the new memcpy/memset functions
imported from GNU libc/newlib. If you have any problem
with the new MIPS optimized assembly try to disable
prefetching support.
Thanks to Rene Nielsen and Matthew Fortune analyzing the
problem so far.
|
|
Linuxthreads.new isn't really useful with the existence
of NPTL/TLS for well supported architectures. There is no
reason to use LT.new for ARM/MIPS or other architectures
supporting NPTL/TLS. It is not available for noMMU architectures
like Blackfin or FR-V. To simplify the live of the few uClibc-ng
developers, LT.new is removed and LT.old is renamed to LT.
LINUXTHREADS_OLD -> UCLIBC_HAS_LINUXTHREADS
|
|
Ported over from glibc mostly without changes.
Lightly tested with mongrel2 in qemu-system-sparc.
|
|
This might be used to generate a Debian copyright file.
|
|
Currently, the Thumb support on ARM has three related Config.in
options, which are not trivial for users to understand, and are in
fact not needed:
- The USE_BX option is not needed: knowing whether BX is available or
not is easy. If you have an ARM > v4 or ARMv4T, then BX is
available, otherwise it's not. This is the logic used in glibc.
- The USE_LDREXSTREX option is not needed: whenever Thumb2 is
available, ldrex/strex are available, so we can simply rely on
__thumb2__ to determine whether ldrex/strex should be used, without
requiring a Config.in option.
- Once USE_BX and USE_LDREXSTREX are removed, the only thing left
that COMPILE_IN_THUMB does is to set -mthumb. This makes the option
unnecessary, as on ARM at least, the user is already supposed to
pass -march=<foo> or other compiler options tuning the library for
a specific ARM variant. There is no reason to do otherwise for
Thumb, which allows to get rid of the COMPILE_IN_THUMB option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|