summaryrefslogtreecommitdiff
path: root/extra/Configs
AgeCommit message (Collapse)Author
2005-09-08punt _DL_FINI_CRT_COMPAT option now that 0.9.28 has been releasedMike Frysinger
2005-08-25allow people to select target sparc architectureMike Frysinger
2005-08-18add support for getrpcbynumber_r/getrpcbyname_r/getrpcent_r and a config ↵Mike Frysinger
option to enable REENTRANT RPC
2005-08-12Remove SYSTEM_LDSO option since it no longer works.Joakim Tjernlund
2005-07-28Add a config option for abort() to shutdown the stdio subsystem. This isManuel Novoa III
mainly to cut down on noise in the NIST/PCTS tests since older POSIX behavior was to fclose() (and hence fflush()) all open streams.
2005-07-15allow people to build shared/ldso but disable threadsMike Frysinger
2005-07-07make RUNPATH/RPATH support configurableMike Frysinger
2005-07-01add a new option for enabling pthreads debug outputMike Frysinger
2005-07-01we have to depend on BUILD_UCLIBC_LDSO in order for the makeconfig output to ↵Mike Frysinger
look right
2005-05-28Add Peter Mazinger fini/crt compat patch. Select DL_FINI_CRT_COMPAT toJoakim Tjernlund
be able to run apps built with 0.9.27. This also renames __uClibc_start_main to __uClibc_main. This compat option should be removed some time after 0.9.28 is released. Let me know if you don't like this change.
2005-05-28Add patch at bugs 274. From Peter Manzinger.Joakim Tjernlund
2005-05-26Add PIE support to ARM. From Peter MazingerJoakim Tjernlund
2005-05-20Back out nptl changes, which for now will be done in branches/uClibc-nptlEric Andersen
2005-05-13ARM1136JF-S support.Paul Mundt
2005-05-07Add in configuration item and Makefile changes for NPTL. We will be"Steven J. Hill"
placing the NPTL code under the top-level 'libpthread' directory. Nothing compiles or even works at this point, so do not enable this option.
2005-05-02SH-4 has nommu variants, whereas SH-3 does not.Paul Mundt
2005-05-02Move sh64 to its own config so we don't crap up the sh one..Paul Mundt
2005-05-02Add sh2a support.Paul Mundt
2005-03-16allow shared code since it builds againMike Frysinger
2005-03-16move the compiler flags WARNINGS optionMike Frysinger
2005-03-16allow users to select MMU againMike Frysinger
2005-03-16well shared compiles again, so might as well remove the perm disableMike Frysinger
2005-03-16CROSS_COMPILE -> CROSS_COMPILER_PREFIX like busyboxMike Frysinger
2005-03-15add a Kconfig option for setting the $(CROSS) build variableMike Frysinger
2005-03-09fix typoMike Frysinger
2005-02-15kconfig for x86_64Mike Frysinger
2005-02-08- 3/NN patches for ssp. Doc updates from Peter S. Mazinger and Robert ConnollyNed Ludd
2005-02-08- 2/NN patches for ssp. Updates from Peter S. Mazinger and Robert ConnollyNed Ludd
2005-01-16Corrected a typo.Peter Kjellerstedt
2005-01-16Per http://bugs.uclibc.org/view.php?id=15, patch from kergoth:Eric Andersen
Sometimes it is desirable to build ldconfig non-static.
2005-01-12- add patch from Peter S. Mazinger to allow selecting the fast access canary ↵Ned Ludd
for propolice/ssp
2004-12-22Remove the obsolete XATTR optionEric Andersen
2004-12-22Patch from Peter S. Mazinger:Eric Andersen
Add pie support for mips
2004-12-22Patch from Peter S. Mazinger:Eric Andersen
Add UCLIBC_BUILD_NOEXECSTACK support.
2004-12-22Patch from Peter S. Mazinger:Eric Andersen
Seperate out security features into a separate menu
2004-12-22Patch from Peter S. Mazinger:Eric Andersen
rename UCLIBC_PROPOLICE to UCLIBC_HAS_SSP
2004-12-22Patch from Peter S. Mazinger:Eric Andersen
rename UCLIBC_PIE_SUPPORT to UCLIBC_BUILD_PIE
2004-12-22Patch from Peter S. Mazinger to simplify PIE handlingEric Andersen
2004-12-21Add support for the Analog Devices Blackfin mmuless processorEric Andersen
2004-12-20- Added support for 13 new syscalls to allow more things to compile when ↵Ned Ludd
using uClibc. mincore() and the ones for Extended Attributes setxattr(), lsetxattr(), fsetxattr(), getxattr(), lgetxattr(), fgetxattr(), listxattr(), llistxattr(), flistxattr(), removexattr(), lremovexattr(), fremovexattr() which are optional.
2004-12-11Partial commit of a patch from Alexandre Oliva:Eric Andersen
Here's an updated version of the patch I posted about a month ago. It leaves -nostdinc alone, and uses -print-file-name=include instead of -print-search-dirs to figure out where GCC's internal headers are. Please let me know whether there are any portions of this patch you'd like me to break into smaller pieces, to rework, or to give up trying to get into uClibc :-) Thanks,
2004-10-06Puts common defines into dl-defs.h (in ldso/include) from dl-elf.h andJoakim Tjernlund
dl-cache.h and make use of it. Also disables the lib-path-redundancy check for the case the cache is not used. Makes use of _PRELOAD_FILE_SUPPORT. From Peter Mazinger.
2004-10-06PIE option correction for Config.in. From Peter Mazinger.Joakim Tjernlund
2004-10-05Peter Kjellerstedt writes:Joakim Tjernlund
After the addition of a configuration option for enabling the support of /etc/ld.so.cache, I thought it might be a good idea to add one for the support of the /etc/ld.so.preload file too. So here it is. While doing this, I also noticed that the dynamic linker would hang indefinitely if either LD_PRELOAD or /etc/ld.so.preload contained a library which was already loaded, so I made a patch for that too. And of course, I could not resist from doing a little clean up of comments and indentation, so here is a patch for that too.
2004-10-03This patch from Mike Frysinger, extended from an earlier patch from Peter S.Eric Andersen
Mazinger implements the changes suggested by me on the uclibc list. On Tuesday 28 September 2004 02:24 pm, Erik Andersen wrote: > What I think should be done is > > *) Someone that cares about USE_CACHE should fix that option > up to be sure it works, and give it a proper config entry > in extra/Configs/Config.in, and rename it to something > more appropriate such as LDSO_CACHE_SUPPORT. > > *) When LDSO_CACHE_SUPPORT=n, UCLIBC_RUNTIME_PREFIX /usr/X11R6/lib > should be included in the default library search path in > dl-elf.c, ldd, and ldconfig. > > *) When LDSO_CACHE_SUPPORT=y, UCLIBC_RUNTIME_PREFIX /usr/X11R6/lib > should be excluded from the default library search path in > dl-elf.c, ldd, and ldconfig, and those wishing to include > X11 stuff should add that into /etc/ld.so.conf and re-run > ldconfig. > > *) At present, LDSO_CONF and LDSO_CACHE use the same names > and same structure as glibc. This precludes > LDSO_CACHE_SUPPORT being uses in any sane fashion on a > dial glibc and uClibc system. Just as it was necessary > for use to use a different name for 'libuClibc' rather > than 'libc', and 'ld-uClibc.so.0' rather than > 'ld-linux.so.2' it seems that these configuration files > really ought to be given different names. >
2004-09-07uClibc gettext support is under development and really shouldn'tEric Andersen
be used by the unsuspecting masses quite yet.
2004-09-02Add a couple of mips-specific string funcs.Manuel Novoa III
Port the generic optimized string funcs from glibc, with some tweaks to cut their size a little. The main change is making memmove call memcpy for forward copying to trim redundant code. Make use of both the generic and arch-specific speed-optimized string funcs configurable. Arch-specific take precedence over generic, and generic takes precedence over basic size-optimized uClibc funcs.
2004-08-28solar asked that this bit be reverted.Manuel Novoa III
2004-08-26Patch from Alexandre Oliva to update the frv default configEric Andersen
2004-08-26Fixes from gentoo.Manuel Novoa III
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 13:45:35 +0000