summaryrefslogtreecommitdiff
path: root/extra/Configs
AgeCommit message (Collapse)Author
2022-01-21nds32: sync with binutils 2.37, gcc 11.2 and linux 5.10.93 changesWaldemar Brodkorb
2020-12-24GNU hash style support disable for MIPSWaldemar Brodkorb
2020-10-02kvx: add support for kvx arch to uClibc-ngYann Sionneau
This commit adds support for Kalray VLIW family (kvx) Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the third of the KV family has the following features: 32/64 bits execution mode 6-issue VLIW architecture 64 x 64bits general purpose registers SIMD instructions little-endian In order to build a usable toolchain, build scripts are provided at the following address: https://github.com/kalray/build-scripts. Kalray uses FOSS which is available at https://github.com/kalray This includes Linux kernel, uClibc-ng, gcc, binutils, etc. Signed-off-by: Clément Léger <cleger@kalray.eu> Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu> Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu> Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu> Signed-off-by: Marius Gligor <mgligor@kalray.eu> Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2020-09-21Support b64_ntop(), b64_pton() (bsd-compat)Waldemar Brodkorb
Signed-off-by: akater <nuclearspace@gmail.com>
2020-02-07aarch64: always use MMUVladimir Murzin
Only MMU variant is supported. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
2020-02-03csky: add statx conditionalsWaldemar Brodkorb
Similar to glibc commit https://sourceware.org/git/?p=glibc.git;a=commit;h=6bbfc5c09fc5b5e3d4a0cddbbd4e2e457767dae7 we need to handle Linux kernel change, which removed stat64 family from default syscall set. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Waldemar Brodkorb <wbrodkorb@conet.de>
2019-11-08riscv64: implement NPTL/TLSWaldemar Brodkorb
basically from or1k port of uClibc-ng, with fixes for structures in pthreadtypes.h from 64 bit architectures. 18 testsuite failures counted.
2019-11-01riscv64: add shared library supportWaldemar Brodkorb
2018-08-10enable NPTL on TARGET_armChristophe Lyon
* extra/Configs/Config.in: enable UCLIBC_HAS_THREADS_NATIVE on TARGET_arm. Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10Allow to select FDPIC ELF for arm architectureChristophe Lyon
* extra/Configs/Config.in.arch: Add TARGET_arm to the target list for UCLIBC_FORMAT_FDPIC_ELF. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-06-10risc-v: initial 64 bit port, static only (no TLS/NPTL)Waldemar Brodkorb
Only a simple hello world is tested in qemu system emulation.
2018-04-17libdl: remove LDSO_NO_CLEANUPWaldemar Brodkorb
2018-03-12tile: add basic support for tilegxWaldemar Brodkorb
This adds basic support for tile architecture. Only static binaries, no ld.so or threading support. Tested with qemu-tilegx only.
2018-03-04fenv: only allow for ppc e500Waldemar Brodkorb
2018-01-31remove arc4random (rc4 based)Waldemar Brodkorb
OpenBSD arc4random is using chacha20 cipher algorithm for a long time. This copy is still based on deprecated rc4 cipher algorithm. We could either update the arc4random.c or drop it. Drop it. Users should better use libbsd when using arc4random interface. Musl/glibc does not have arc4random either.
2018-01-02remove COMPAT_ATEXITWaldemar Brodkorb
2017-12-31m68k: add NPTL/TLS supportWaldemar Brodkorb
Port over NPTL/TLS support from GNU C Library. In the first step only the slower syscall is used for TLS access. The uClibc-ng testsuite shows 79 errors, so their is room for bugfixes and improvements.
2017-12-26csky: remove -mcpu and -mhard-float from configGuo Ren
Pass the -mcpu and -mhard-float from UCLIBC_EXTRA_CFLAGS instead. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2017-12-03fenv: only allow to enable for supported architecturesWaldemar Brodkorb
2017-11-19csky: port to uclibc-ngGuo Ren
Follow the steps to build c-sky uclibc linux system: 1. git clone https://github.com/c-sky/buildroot.git 2. cd buildroot 3. make qemu_csky_ck810_uclibc_defconfig 4. make Follow the buildroot/board/qemu/csky/readme.txt to run. This buildroot toolchain is pre-build, But you can rebuild the c-sky uclibc-ng alone and install it to the buildroot sysroot manually. We'll try our best to improve the uclibc-ng continuously. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2017-08-20arc: Merge ARCv2 string routines in generic ARC .S filesAlexey Brodkin
In cde74b83f9b2 "ARC: remove special CFLAGS/LDFLAGS handling" we got rid of CONFIG_ARC_CPU_HS which was used to select ARCv2-specific implementation of optimized string routines. So now ARCv2-tuned memset/memcpy/strcmp are not used, instead those for ARC700 used for both ARC700 and ARCHS. Without uClibc config option we may only tell which CPU type we're targeting by built-in defines of GCC. I.e. no more conditional file inclusion in Makefiles. That leaves us only one option - merge both implementations in 1 file and use ifdefs. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-23sparc64: add basic supportWaldemar Brodkorb
No NPTL, no LDSO support. Bootup with Busybox Ash in Qemu working. Testuite shows only two failures, but mksh continue/break support doesn't work.
2017-05-14or1k: add NPTL/TLS supportWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2017-04-17remove old regex implementationWaldemar Brodkorb
2017-04-17remove old fnmatch implementationWaldemar Brodkorb
2017-04-16or1k: remove false selectWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2017-04-16libm: allow long double wrappers for all architecturesWaldemar Brodkorb
If you enable these wrappers, be sure you don't need long double precision on your embedded device, as these only enables long double warpper functions to the existing double math functions. Required to build some software as lvm2. Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2017-04-08math: no reason to depend on special architectureWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2017-04-01nios2: allow to hack on experimenting ld.so supportWaldemar Brodkorb
2017-04-01unify defconfigsWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2017-03-21ARC: remove special CFLAGS/LDFLAGS handlingWaldemar Brodkorb
Either toolchain defaults or buildsystems should provide the architecture specific CFLAGS and LDFLAGS.
2017-03-20remove RPC implementationWaldemar Brodkorb
The included RPC implementation is ipv4 only. Other C library projects have either deprecated the internal RPC implementation (GNU C Library) or never implemented such functionality (musl C Library). The latest rpcbind release (0.2.4) checks for libtirpc and does not allow to be build with uClibc-ng RPC without patching. The common use case for RPC nowadays is to use rpcbind together with nfs-utils to provide NFS server or client support to a system. The included RPC implementation does create issues with duplicate symbol failures when statically compiling with RPC enabled.
2017-02-01add experimental aarch64 supportWaldemar Brodkorb
Ported over from GNU C Library and runtime tested in Qemu.
2017-01-24Restore UCLIBC_HAS_LFS as "always enabled"Alexey Neyman
Otherwise, buildroot rejects uClibc-ng in an external toolchain. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-22nds32: add NPTL/TLS, *context function, libm changes and code cleanupVincent Ren-Wei Chen
This commit includes following features. 1. Support NPTL/TLS 2. Add libm function which is used to handle FP rounding and excpetions (ex: fclrexcpt,fedisblxcpti,feenablxcpt... ) 3. Add *context function for operating user context (ex: setcontext,getcontext,makecontext... ) 4. Change the return flow from signal handler 5. Cleanup of old code The testsuite only has 2 errors, tst-cpuclock1 and tst-cputimer1, which are related to timing accuracy. (math and locale tests are disabled) Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com>
2016-12-31argp/iconv needs wchar enabledWaldemar Brodkorb
2016-12-29locale: needs libiconvWaldemar Brodkorb
2016-12-23remove UCLIBC_LINUX_MODULE_26Waldemar Brodkorb
The syscall wrappers are not required and other C libraries do not provide them. Busybox modutils.c must be patched so that syscall() is used for uClibc-ng. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2016-12-21remove obstack supportWaldemar Brodkorb
Remove __UCLIBC_HAS_OBSTACK__ as it isn't very uptodate and maintained part. It shouldn't be required for any software and mostly shipped with stuff which use it. (f.e. binutils-gdb)
2016-12-20remove __MALLOC_GLIBC_COMPAT__ optionWaldemar Brodkorb
This option is enabled for a long time and I see no useful case where we should be incompatible to glibc here.
2016-12-20add stub implementation for libintl/gettextWaldemar Brodkorb
These adds the stubs from gettext-tiny 0.0.5 from here: https://github.com/sabotage-linux/gettext-tiny
2016-12-14add libiconv-tiny implementationWaldemar Brodkorb
To use it enable UCLIBC_HAS_LIBICONV, then iconv_open/iconv_close should be available.
2016-11-29remove libresolv stubWaldemar Brodkorb
2016-11-27remove UCLIBC_HAS_LFSWaldemar Brodkorb
2016-11-27remove libnsl stubWaldemar Brodkorb
2016-11-13ARC: introduce explicit support for atomicsVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-04nios2: sync support with glibcWaldemar Brodkorb
Only static linking is supported for now. More debugging and analyzing for ld.so, TLS and NPTL is required. But at least you can bootup a static root fileystem in Qemu.
2016-11-03microblaze: add NPTL/TLS support from GNU libcWaldemar Brodkorb
Not perfect, but a starting point. Some tests of the test suite are failing.
2016-10-16linuxthreads: allow to choose on all supported architecturesWaldemar Brodkorb
To analyze or debug any linuxthreads problems it is useful to have the ability to have a full gdb on the target available. At the moment you could only debug stuff on microblaze. Now we can verify that linuxthreads are working fine for every supported architecture.
2016-09-30remove linux kernel 2.4 modules supportWaldemar Brodkorb
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 11:53:32 +0000