summaryrefslogtreecommitdiff
path: root/extra/Configs/Config.in
AgeCommit message (Collapse)Author
2024-02-25Add time64 support for PowerPC.Dmitry Chestnykh
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
2024-02-22xtensa: Add time64 support.Dmitry Chestnykh
- xtensa is the second architecture that supports time64 inside uClibc-ng. - Linux Kernel always uses 32bit time variables inside `stat` structures, so there is a need to use `st_atime`, `st_mtime` and `st_ctime` structures with the same 32bit-wide `tv_sec` and `tv_nsec` variables even if time64 is enabled. Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
2024-02-22Introduce time64 support.Dmitry Chestnykh
This patch introduces *time64 syscalls support for uClibc-ng. Currently the redirection of syscalls to their *time64 analogs is fully supported for 32bit ARM (ARMv5, ARMv6, ARMv7). The main changes that take effect when time64 feature is enabled are: - sizeof(time_t) is 8. - There is a possibility os setting date beyond year 2038. - some syscalls are redirected: clock_adjtime -> clock_adjtime64 clock_getres -> clock_getres_time64 clock_gettime -> clock_gettime64 clock_nanosleep -> clock_nanosleep_time64 clock_settime -> clock_settime64 futex -> futex_time64 mq_timedreceive -> mq_timedreceive_time64 mq_timedsend -> mq_timedsend_time64 ppoll -> ppoll_time64 pselect6 -> pselect6_time64 recvmmsg -> recvmmsg_time64 rt_sigtimedwait -> rt_sigtimedwait_time64 sched_rr_get_interval -> sched_rr_get_interval_time64 semtimedop -> semtimedop_time64 timer_gettime -> timer_gettime64 timer_settime -> timer_settime64 timerfd_gettime -> timerfd_gettime64 timerfd_settime -> timerfd_settime64 utimensat -> utimensat_time64. - settimeofday uses clock_settime (like in glibc/musl). - gettimeofday uses clock_gettime (like in glibc/musl). - nanosleep uses clock_nanosleep (like in glibc/musl). - There are some fixes in data structures used by libc and kernel for correct data handling both with and without enabled time64 support. Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
2023-12-12elf: support ELF binaries in noMMUGreg Ungerer
The Linux kernels ELF-FDPIC binfmt program loader can support loading and running conventional ELF format binaries on noMMU kernels when compiled appropriately. That is when they are constant displacement binaries such as generated using the -pie compile option. Add a configure option to allow selecting ELF binary support in noMMU mode configurations on architectures that support this. The main requirement is to generate the ldso run-time loader to perform relocation at load time. These configurations do not support shared libraries, so there is no need to generate a full shared library, only the static version is required. The use of ELF format binaries does mean a slightly simpler toolchain generation (does not require a -uclinux- for some architectures) and does not require an extra tool like elf2flt. This initial support targets M68K, ARM and RISC-V architectures. No kernel changes are required, the required support for this is already in mainline kernels (certainly as of linux-6.6). Note that for the M68K and ARM architectures that the initialized registers and stack layout at process startup is slightly different for the flat format loader and the ELF/ELF-FDPIC loaders. So we need some changes to the startup code (crt1.S) for them. I have not done extensive testing outside of M68K, ARM and RISC-V. I had to make changes to a couple of the dl-startup.h architecture files to get them to build for this noMMU case. I did not dig down too deep on the reasons, but they still seem ok for the MMU case as well. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-11-09libpthread/nptl: make default stack size configurableBen Wolsieffer
Threads currently have 2-4 MiB stacks by default (depending on the platform). This is fine on MMU platforms, where this stack space is not actually allocated until it is used, but tends to waste a large amount of memory on no-MMU platforms. This patch adds a PTHREADS_STACK_DEFAULT_SIZE Kconfig option that allows the user to override the default stack size at build time. This allows the user to select a reasonable default stack size for the software that runs on their system, and avoids the need to patch every package to add calls to pthread_attr_setstacksize(). An alternative to this patch would be to change the hardcoded default stack size on no-MMU platforms, but it is difficult to choose an appropriate value because the minimum required stack depends on the software in use. This would also be a breaking change. Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
2023-09-17lm32: disable ctor/dtorWaldemar Brodkorb
2023-08-14fix file permissionslordrasmus
2023-08-14add vsdo supportlordrasmus
2022-11-20RISC-V 32-bit supportustcymgu@gmail.com
Added 32-bit RISC-V support. I have managed to get 32-bit RISC-V No-MMU Linux running based on mainstream buildroot. It's nice to have uclibc support this 32-bit No-MMU target. There's no substantial code change except definations and config options. Signed-off-by: Yimin Gu <ustcymgu@gmail.com>
2022-10-14Static pie support for ppclinted
Modified config files and crt1.S to support static pie elf generation. Signed-off-by: linted <linted@users.noreply.github.com>
2022-09-21xtensa: add static pie supportMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-09-07Added support for creation of Static Position-Independent Executables (PIE) ↵linted
on mips Updated config to allow compilation of rcrt1.o for mips and modified it's crt1.S to perform relocates in __start. The mips architecture performs relocations differently then most other architectures. reloc_static_pie was rewritten, taking code from dl-startup.c, in order to perfrom the additional relocations. Modifications were made to mips' dl-startup.h to allow for the use of contained macros without including _start definition. Signed-off-by: linted <linted@users.noreply.github.com>
2022-08-11fix ARCH_NATIVE_BIT for aarch64Waldemar Brodkorb
Patch suggested by Thomas Petazzoni and tested by me. Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-08-08Added support for creation of Static Position-Independent Executables (PIE) ↵linted
on aarch64 Updated config to allow compilation of rcrt1.o for aarch64 and modified it's crt1.S to relocate dynamic section prior to __uClibc_main. Disabled stack protector when compiling reloc_static_pie.c to avoid TLS access prior to it being setup. Signed-off-by: linted <linted@users.noreply.github.com>
2022-07-26Added support for creation of Static Position-Independent Executables (PIE) ↵linted
on i386, x86_64, and arm. This patch adds the generation of rcrt1.o which is used by gcc when compiling with the --static-pie flag. rcrt1.o differs from crt1.o and Scrt1.o in that it the executable has a dynamic section but no relocations have been performed prior to _start being called. crt1.o assumes there to be no dynamic relocations, and Scrt1.o has all relocations performed prior to execution by lsdo. The new reloc_static_pie function handles parsing the dynamic section, and performing the relocations in a architecture agnostic method. It also sets _dl_load_base which is used when initalizing TLS to ensure loading from the proper location. This allows for easier porting of static-pie support to additional architectures as only modifications to crt1.S to find the load address are required. Signed-off-by: linted <linted@users.noreply.github.com>
2022-05-12DnsLookup: Configurable dnsQueryId generation including randomhanishkvc
Dns lookup logic has been updated to provide a configurable compile time selection of dns query id generation logics, including random, where possible, instead of the previous simple counter mode. This should make dns poison attempts more difficult. The uclibc developers wish to thank the white hat teams which alerted the community about the possible weakness in the dns path, given the increased resources with adversaries today. Given that embedded systems may or may not have sources for trying to generate random numbers, and also to try and keep the load on the system low, by default it uses the standard random prng based logic to indirectly generate the ids. However if either urandom or else if realtime clock is available on the target, then the same is used to reseed the prng periodically in a slightly non deterministic manner. Also additional transform (one way where possible) is used to avoid directly exposing the internal random sequence. The dns lookup logic maintains its own state wrt the random prng functions, so that other users of the library's random prng are not affected wrt their operations with the prng. Note to Platform developers: If you want to change from the default prngplus based logic, to one of the other logics provided, then during compile/config time you can switch to one of these additional choices wrt dns query id generation, by using make config and companions. If your platform doesnt support urandom nor a realtime clock backed by a source with sufficient resolution, and or for some reason if you want to revert to previous simple counter, rather than the transformed random prng plus logic, you can force the same at compile time by selecting SimpleCounter mode. If you want to increase the randomness of the generated ids, and dont mind the increased system load and latency then you could select the Urandom mode during config. Do note that it will be dipping into the entropy pool maintained by ur system. If your target has a system realtime clock available and exposed to user space, and inturn if you want to keep the underlying logic simple, you could try using the clock option from the config. However do note that the clock should have nanosecond resolution to help generate ids which are plausibly random. Also improvements to processor and or io performance can affect this. Wrt the URandom and Clock modes, if there is a failure with generation of the next random value, the logic tries to fallback to simple counter mode. If you want to change the underlying logic to make it more random and or more simple, look at dnsrand_setup and dnsrand_next. Signed-off-by: hanishkvc <hanishkvc@gmail.com>
2020-12-24GNU hash style support disable for MIPSWaldemar Brodkorb
2020-10-02kvx: add support for kvx arch to uClibc-ngYann Sionneau
This commit adds support for Kalray VLIW family (kvx) Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the third of the KV family has the following features: 32/64 bits execution mode 6-issue VLIW architecture 64 x 64bits general purpose registers SIMD instructions little-endian In order to build a usable toolchain, build scripts are provided at the following address: https://github.com/kalray/build-scripts. Kalray uses FOSS which is available at https://github.com/kalray This includes Linux kernel, uClibc-ng, gcc, binutils, etc. Signed-off-by: Clément Léger <cleger@kalray.eu> Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu> Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu> Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu> Signed-off-by: Marius Gligor <mgligor@kalray.eu> Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2020-09-21Support b64_ntop(), b64_pton() (bsd-compat)Waldemar Brodkorb
Signed-off-by: akater <nuclearspace@gmail.com>
2019-11-08riscv64: implement NPTL/TLSWaldemar Brodkorb
basically from or1k port of uClibc-ng, with fixes for structures in pthreadtypes.h from 64 bit architectures. 18 testsuite failures counted.
2019-11-01riscv64: add shared library supportWaldemar Brodkorb
2018-08-10enable NPTL on TARGET_armChristophe Lyon
* extra/Configs/Config.in: enable UCLIBC_HAS_THREADS_NATIVE on TARGET_arm. Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-06-10risc-v: initial 64 bit port, static only (no TLS/NPTL)Waldemar Brodkorb
Only a simple hello world is tested in qemu system emulation.
2018-04-17libdl: remove LDSO_NO_CLEANUPWaldemar Brodkorb
2018-03-12tile: add basic support for tilegxWaldemar Brodkorb
This adds basic support for tile architecture. Only static binaries, no ld.so or threading support. Tested with qemu-tilegx only.
2018-01-31remove arc4random (rc4 based)Waldemar Brodkorb
OpenBSD arc4random is using chacha20 cipher algorithm for a long time. This copy is still based on deprecated rc4 cipher algorithm. We could either update the arc4random.c or drop it. Drop it. Users should better use libbsd when using arc4random interface. Musl/glibc does not have arc4random either.
2018-01-02remove COMPAT_ATEXITWaldemar Brodkorb
2017-12-31m68k: add NPTL/TLS supportWaldemar Brodkorb
Port over NPTL/TLS support from GNU C Library. In the first step only the slower syscall is used for TLS access. The uClibc-ng testsuite shows 79 errors, so their is room for bugfixes and improvements.
2017-11-19csky: port to uclibc-ngGuo Ren
Follow the steps to build c-sky uclibc linux system: 1. git clone https://github.com/c-sky/buildroot.git 2. cd buildroot 3. make qemu_csky_ck810_uclibc_defconfig 4. make Follow the buildroot/board/qemu/csky/readme.txt to run. This buildroot toolchain is pre-build, But you can rebuild the c-sky uclibc-ng alone and install it to the buildroot sysroot manually. We'll try our best to improve the uclibc-ng continuously. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2017-08-20arc: Merge ARCv2 string routines in generic ARC .S filesAlexey Brodkin
In cde74b83f9b2 "ARC: remove special CFLAGS/LDFLAGS handling" we got rid of CONFIG_ARC_CPU_HS which was used to select ARCv2-specific implementation of optimized string routines. So now ARCv2-tuned memset/memcpy/strcmp are not used, instead those for ARC700 used for both ARC700 and ARCHS. Without uClibc config option we may only tell which CPU type we're targeting by built-in defines of GCC. I.e. no more conditional file inclusion in Makefiles. That leaves us only one option - merge both implementations in 1 file and use ifdefs. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-23sparc64: add basic supportWaldemar Brodkorb
No NPTL, no LDSO support. Bootup with Busybox Ash in Qemu working. Testuite shows only two failures, but mksh continue/break support doesn't work.
2017-05-14or1k: add NPTL/TLS supportWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2017-04-17remove old regex implementationWaldemar Brodkorb
2017-04-17remove old fnmatch implementationWaldemar Brodkorb
2017-03-20remove RPC implementationWaldemar Brodkorb
The included RPC implementation is ipv4 only. Other C library projects have either deprecated the internal RPC implementation (GNU C Library) or never implemented such functionality (musl C Library). The latest rpcbind release (0.2.4) checks for libtirpc and does not allow to be build with uClibc-ng RPC without patching. The common use case for RPC nowadays is to use rpcbind together with nfs-utils to provide NFS server or client support to a system. The included RPC implementation does create issues with duplicate symbol failures when statically compiling with RPC enabled.
2017-02-01add experimental aarch64 supportWaldemar Brodkorb
Ported over from GNU C Library and runtime tested in Qemu.
2017-01-24Restore UCLIBC_HAS_LFS as "always enabled"Alexey Neyman
Otherwise, buildroot rejects uClibc-ng in an external toolchain. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-22nds32: add NPTL/TLS, *context function, libm changes and code cleanupVincent Ren-Wei Chen
This commit includes following features. 1. Support NPTL/TLS 2. Add libm function which is used to handle FP rounding and excpetions (ex: fclrexcpt,fedisblxcpti,feenablxcpt... ) 3. Add *context function for operating user context (ex: setcontext,getcontext,makecontext... ) 4. Change the return flow from signal handler 5. Cleanup of old code The testsuite only has 2 errors, tst-cpuclock1 and tst-cputimer1, which are related to timing accuracy. (math and locale tests are disabled) Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com>
2016-12-31argp/iconv needs wchar enabledWaldemar Brodkorb
2016-12-29locale: needs libiconvWaldemar Brodkorb
2016-12-23remove UCLIBC_LINUX_MODULE_26Waldemar Brodkorb
The syscall wrappers are not required and other C libraries do not provide them. Busybox modutils.c must be patched so that syscall() is used for uClibc-ng. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2016-12-21remove obstack supportWaldemar Brodkorb
Remove __UCLIBC_HAS_OBSTACK__ as it isn't very uptodate and maintained part. It shouldn't be required for any software and mostly shipped with stuff which use it. (f.e. binutils-gdb)
2016-12-20remove __MALLOC_GLIBC_COMPAT__ optionWaldemar Brodkorb
This option is enabled for a long time and I see no useful case where we should be incompatible to glibc here.
2016-12-20add stub implementation for libintl/gettextWaldemar Brodkorb
These adds the stubs from gettext-tiny 0.0.5 from here: https://github.com/sabotage-linux/gettext-tiny
2016-12-14add libiconv-tiny implementationWaldemar Brodkorb
To use it enable UCLIBC_HAS_LIBICONV, then iconv_open/iconv_close should be available.
2016-11-29remove libresolv stubWaldemar Brodkorb
2016-11-27remove UCLIBC_HAS_LFSWaldemar Brodkorb
2016-11-27remove libnsl stubWaldemar Brodkorb
2016-11-04nios2: sync support with glibcWaldemar Brodkorb
Only static linking is supported for now. More debugging and analyzing for ld.so, TLS and NPTL is required. But at least you can bootup a static root fileystem in Qemu.
2016-11-03microblaze: add NPTL/TLS support from GNU libcWaldemar Brodkorb
Not perfect, but a starting point. Some tests of the test suite are failing.