summaryrefslogtreecommitdiff
path: root/extra/Configs/Config.in
AgeCommit message (Collapse)Author
2009-10-28Simplify kconfig wording of thread supportBernhard Reutner-Fischer
Use a choice for thread support selection. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-10-28remove wrong default for choiceBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-10-28support selecting which locales to buildBernhard Reutner-Fischer
Introduce UCLIBC_BUILD_MINIMAL_LOCALES and if selected build only those locales. Based on a patch by Bernhard Reutner-Fischer. Signed-off-by: Marc Andre Tanner <mat@brain-dump.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-10-08ftw() is obsolescent in SUSv4Bernhard Reutner-Fischer
Apps should switch to nftw() Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-09-26Config.in: enable TLS config option only for nptlAustin Foxley
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2009-09-17No need for a libresolv stubBernhard Reutner-Fischer
libresolv is just a stub anyway, default to not building it. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-09-16handle make ARCH= configBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-09-14Revert "default ?conf to native arch"Bernhard Reutner-Fischer
This reverts commit 6625518cd6894338937a74ca6b9187b7b8167b03. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-08-25default ?conf to native archBernhard Reutner-Fischer
Default is now the native arch, you can start a fresh .config via 'make ARCH=ia64 menuconfig'. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-08-01Rules.mak: Fix references to svn.Khem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2009-03-14default linux-2.4 module support to off for Blackfin targetsMike Frysinger
2009-02-24Fix thinko in svn 25434.Rob Landley
2009-02-24Make HARDWIRED_ABSPATH a config option.Rob Landley
2009-02-20Linuxthreads_old and NPTL must be mutually exclusive.Carmelo Amoroso
TLS support cannot be enabled when using Linuxthreads_old (at least until Linuxthreads and Linuxthreads_old will not me merged togheter) Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2009-02-18- explicitely discourage to use pregenerated locale data.Bernhard Reutner-Fischer
Rob Landley promised to provide them for all arches but didn't do that yet so disable it for now since they just do not exist right now (and furthermore cause more pain than gain).
2009-02-05Make TLS configure time variable. Enable it along with NPTL.Khem Raj
2008-12-31Merge some pre-work from branch, needed by NPTL.Khem Raj
2008-12-29- expand SUSv3_LEGACYBernhard Reutner-Fischer
- SUSv4_LEGACY part #1 (non-networking)
2008-12-22- mark capset() as linux specificBernhard Reutner-Fischer
2008-12-22- capget() is linux specific; Sync helptext with current exclude list.Bernhard Reutner-Fischer
2008-11-14fixing resolver part 2: make _res structure membersDenis Vlasenko
configurable. we don't use most of it anyway.
2008-11-11- update recommendation for pregenerated locales.Bernhard Reutner-Fischer
- update name of locale-tarball. We will retroactively fill them in, eventually
2008-10-30- helper config symbol has to depend on thread supportBernhard Reutner-Fischer
2008-10-27Explain what malloc simple is good for, and what it isn't good for.Rob Landley
2008-10-27- add helpful help stringBernhard Reutner-Fischer
2008-10-17- fix toggling thread implementation.Bernhard Reutner-Fischer
Previously the old headers were left in include/ leading to spurious compile failures. This is ugly as it can get (we resort to sneaking -L in for the moment) but good enough for now. The worst thing which can happen is that we ln these headers once per invocation of make, nothing more. If some installation of make(1) complains about the "-L" then wrap it in ifneq ($(findstring check-symlink,$(.FEATURES)),)
2008-10-14- fix locale dependencies and make default locale generation less verbose.Bernhard Reutner-Fischer
The verbosity can be set to the previous level by passing V=2 to make.
2008-10-06- wrap overlong linesBernhard Reutner-Fischer
2008-10-06- move helptexts to their config symbols so that they are actually displayedBernhard Reutner-Fischer
TODO: trick kconfig into displaying choice help properly
2008-10-06- disentangle REALTIME from ADVANCED_REALTIME (Peter S. Mazinger)Bernhard Reutner-Fischer
2008-09-25- RPC support currently requires either IPv4 and/or IPv6 supportBernhard Reutner-Fischer
2008-09-25- adjust helptextBernhard Reutner-Fischer
2008-09-15Make menuconfig help bigger and fluffier.Rob Landley
2008-09-09- adjust range of valid grp buffer size to match pwd buffer sizeBernhard Reutner-Fischer
2008-08-27- flesh out helptext of DOMULTI.Bernhard Reutner-Fischer
Put short, just leave it alone or keep all parts -- alternatively go help with lto if you have time.
2008-07-08New .config option UCLIBC_HAS_STUBS, enables fork() stub on NOMMUDenis Vlasenko
2008-06-27Added support for the AI_ADDRCONFIG flag in the hints->ai_flags parameter to ↵Ricard Wanderlof
getaddrinfo(3).
2008-06-07- if UNIX98PTY_ONLY is not set then we're in legacy land anyway which needsBernhard Reutner-Fischer
UCLIBC_HAS_GETPT unconditionally for __libc_ptyname{1,2}[] and related bloat.
2008-06-05- make libcrypt optional. Untested.Bernhard Reutner-Fischer
2008-06-05- fix keyword "depends on"Bernhard Reutner-Fischer
2008-06-05- linuxthreads and linuxthreads.old need nanosleep()Bernhard Reutner-Fischer
2008-06-03- adds several config-options to allow for turning off certain featuresBernhard Reutner-Fischer
like o UCLIBC_HAS_GNU_ERROR o UCLIBC_HAS_BSD_ERR o UCLIBC_HAS_PTY o UCLIBC_HAS_GETPT (1) o UCLIBC_SYSCALL_STUBS o UCLIBC_SYSCALL_STUB_WARNING o UCLIBC_LINUX_SPECIFIC (2) o UCLIBC_BSD_SPECIFIC (3) o UCLIBC_NTP_LEGACY (4) o UCLIBC_SV4_DEPRECATED (5) o UCLIBC_HAVE_REALTIME (6) o UCLIBC_HAVE_ADVANCED_REALTIME (7) o UCLIBC_HAVE_EPOLL (8) o UCLIBC_HAVE_XATTR (9) o UCLIBC_HAVE_PROFILING (10) (1) make non-standard getpt optional and implement standard posix_openpt (2) fstatfs(), inotify_*(), ioperm(), iopl(), madvise(), modify_ldt(), personality() ppoll(), setresuid() (3) mincore(), getdomainname(), setdomainname() (4) ntp_adjtime(), ntp_gettime() aliases (5) ustat() [use statfs(2) in your code instead] (6) All marked as "(REALTIME)" in SUSv3 (7) All marked as "(ADVANCED REALTIME)" in SUSv3 (8) epoll_create(), epoll_ctl(), epoll_wait() (9) all Extended Attributes (10) helpers for gcc's -finstrument-functions - Fixes _dl_exit() - Implements sleep(3) for !UCLIBC_HAVE_REALTIME - Implements usleep(3) for !UCLIBC_HAVE_REALTIME - adds #warning about incorrect posix_fadvise{,64}() - removes unused and unwanted uselib() Net outcome is that an allnoconfig with HAVE_SHARED is now about 88k instead of formerly 130k.
2008-06-02Rename HAVE_NO_SHARED to ARCH_HAS_NO_SHARED, otherwise it's too confusingDenis Vlasenko
with HAVE_SHARED
2008-05-31- default kernel-modules funcs to on.Bernhard Reutner-Fischer
2008-05-21- my manpage sais that init_module, create_module, query_module, delete_moduleBernhard Reutner-Fischer
were removed in linux-2.6
2008-04-25Fix some sh4 specific entriesCarmelo Amoroso
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2008-04-24Fix whitespace damage in top level Config.in.Hans-Christian Egtvedt
2008-01-05Chris Zankel writes:Mike Frysinger
The following patches add support for the Xtensa processor architecture to uClibc. They are based on a recent SVN checkout (12/05/2007). The first patch (attached to this post) adds Xtensa support to various shared configuration and make files. The following patches then include the Xtensa specific files and directories. I welcome any feedback and would appreciate it if you could include the patches into the mainline tree. I am certainly committed to maintain the port. Bob Wilson was kind enough to review the patches. Some notes about the architecture: Xtensa is a configurable and extensible processor architecture developed by Tensilica. For more information, please visit: www.linux-xtensa.org.
2008-01-05not everyone is a ninja: explicitly state that people should convert from ↵Mike Frysinger
sys_errlist[] to strerror()
2007-11-16Added AVR32 support to uClibc. Signed-off-by: Hans-Christian Egtvedt ↵Carmelo Amoroso
<hcegtvedt@atmel.com>