summaryrefslogtreecommitdiff
path: root/Rules.mak
AgeCommit message (Collapse)Author
2020-10-02kvx: add support for kvx arch to uClibc-ngYann Sionneau
This commit adds support for Kalray VLIW family (kvx) Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the third of the KV family has the following features: 32/64 bits execution mode 6-issue VLIW architecture 64 x 64bits general purpose registers SIMD instructions little-endian In order to build a usable toolchain, build scripts are provided at the following address: https://github.com/kalray/build-scripts. Kalray uses FOSS which is available at https://github.com/kalray This includes Linux kernel, uClibc-ng, gcc, binutils, etc. Signed-off-by: Clément Léger <cleger@kalray.eu> Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu> Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu> Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu> Signed-off-by: Marius Gligor <mgligor@kalray.eu> Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2020-09-03fix static builds with gcc 10.xWaldemar Brodkorb
2020-08-28bump for release 1.0.35v1.0.35Waldemar Brodkorb
2020-05-06prepare for release 1.0.34v1.0.34Waldemar Brodkorb
2020-04-27Rules.mak: Fix check_as for recent binutils versionsMarcel Patzlaff
As described in https://bugs.busybox.net/show_bug.cgi?id=12801 the check for '-Wa,--noexecstack' is not working since binutils 2.31.x. This fix adapts the approach already taken with check_ld and uses a temporary file. Further, check_gcc is also adapted to avoid future problems. Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
2020-02-16bump to 1.0.33 for releasev1.0.33Waldemar Brodkorb
2019-10-15bump to 1.0.32 for releasev1.0.32Waldemar Brodkorb
2018-11-14bump for release 1.0.31v1.0.31Waldemar Brodkorb
2018-04-28bump for release 1.0.30v1.0.30Waldemar Brodkorb
2018-03-03bump for release 1.0.29v1.0.29Waldemar Brodkorb
2018-03-01quieten some warnings when EXTRA_WARNINGS not setWaldemar Brodkorb
2018-03-01fix issue with LDSO_GNU_HASH_SUPPORTWaldemar Brodkorb
Under Fedora 27 there is a problem with the existing ld check. Binutils ld segfaults. Add a glibc compat macro to complete the build on Fedora. Signed-off-by: Sven Anders <anders@anduras.de>
2018-01-21bump version to 1.0.28v1.0.28Waldemar Brodkorb
2018-01-21supress some gcc warningsWaldemar Brodkorb
2017-12-26csky: remove -mcpu and -mhard-float from configGuo Ren
Pass the -mcpu and -mhard-float from UCLIBC_EXTRA_CFLAGS instead. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2017-11-27bump for releasev1.0.27Waldemar Brodkorb
2017-11-19csky: port to uclibc-ngGuo Ren
Follow the steps to build c-sky uclibc linux system: 1. git clone https://github.com/c-sky/buildroot.git 2. cd buildroot 3. make qemu_csky_ck810_uclibc_defconfig 4. make Follow the buildroot/board/qemu/csky/readme.txt to run. This buildroot toolchain is pre-build, But you can rebuild the c-sky uclibc-ng alone and install it to the buildroot sysroot manually. We'll try our best to improve the uclibc-ng continuously. Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2017-07-28bump for releasev1.0.26Waldemar Brodkorb
2017-06-11bump for releasev1.0.25Waldemar Brodkorb
2017-04-22bump for releasev1.0.24Waldemar Brodkorb
2017-04-02bump for next release, uClibc -> uClibc-ngv1.0.23Waldemar Brodkorb
2017-03-21ARC: remove special CFLAGS/LDFLAGS handlingWaldemar Brodkorb
Either toolchain defaults or buildsystems should provide the architecture specific CFLAGS and LDFLAGS.
2017-02-01bump for releasev1.0.22Waldemar Brodkorb
2017-02-01add experimental aarch64 supportWaldemar Brodkorb
Ported over from GNU C Library and runtime tested in Qemu.
2016-12-26bump for releasev1.0.21Waldemar Brodkorb
2016-12-04bump for releasev1.0.20Waldemar Brodkorb
2016-10-23bump for releasev1.0.19Waldemar Brodkorb
2016-10-22ARC: build: don't force usage of llock and swape instructionsVineet Gupta
This is because some old ARC750 cores lack these instructions. We now rely on the default for the toolchain driver: -mcpu=A7 won't enable those, while -mcpu=archs will as these instructions are baseline (and thus is not impacted with this change). If some arc700 based cpu does have them, it can override the driver defaults in it's one level up build system. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-09fix mips/mips64 build for old compilersWaldemar Brodkorb
gcc 4.8 does not support nan flag. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-30ubacktrace/uargp: remove unneeded and false linker scriptsWaldemar Brodkorb
2016-09-27bump for releasev1.0.18Waldemar Brodkorb
2016-09-26use a single libc and deduplicate threading codeWaldemar Brodkorb
Similar to musl libc a single libc has many benefits and solves some open issues with uClibc-ng. - no pthread_mutex_* weak symbols exported anymore - applications no longer failing to link when either -lrt or -lpthread are missing for dynamic and static linking mode - smaller C library - slightly better runtime performance
2016-08-27remove DOMULTI supportWaldemar Brodkorb
A single test with targeting ARM showed that this feature seems bit rotted. Remove DOMULTI and simplify Makefiles.
2016-08-25mips: add NaN supportWaldemar Brodkorb
2016-08-23delete dead code, use -Wdeclaration-after-statement by defaultWaldemar Brodkorb
Add -Wdeclaration-after-statement when EXTRA_WARNINGS is enabled.
2016-08-01bump for releasev1.0.17Waldemar Brodkorb
2016-07-31fix minor portability issue, use printfWaldemar Brodkorb
2016-07-03bump for releasev1.0.16Waldemar Brodkorb
2016-06-30nds32: add support for new architectureWaldemar Brodkorb
Add support for Andes Technology NDS32 architecture. See here http://www.andestech.com/en/index/index.htm for more informaton. Verification of the port from an older uClibc port was done on a sponsored AG101p board. The testsuite only has 5 errors, three are related to an existing bug in dlclose() with LT.old, also happening on cris32 and m68k. Failures to fallocate/posix_fallocate are unresolved. Thanks to Andes Technology sponsoring the hardware and being very helpful while doing the uClibc-ng porting. Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-06-23ARC: remove deprecated -msoft-float from CFLAGSAlexey Brodkin
"-msoft-float" makes no sense for ARC because there's no such thing as "-mhard-float" on ARC. Instead we use our own "-mfpu=XXX" option when a particular floating-point related HW feature is enabled in the ARC core. We used to live with that phony option for quite some time but with migration to newer GCC following warning now appears: -------------------->8----------------- arc-linux-gcc: warning: ‘-msoft-float’ is deprecated cc1: warning: ‘-msoft-float’ is deprecated [enabled by default] -------------------->8----------------- And that warning gets printed for each invocation of gcc with the option in question, which makes compilation output barely readable. So we disable that phony option for ARC now. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Waldemar Brodkorb <wbx@uclibc-ng.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Anton Kolesov <akolesov@synopsys.com>
2016-05-29bump for releasev1.0.15Waldemar Brodkorb
2016-05-28buildsys: Fix broken link.asneeded functionLeonid Lisovskiy
Both $(CC_FLAG_ASNEEDED) and $(CC_FLAG_NO_ASNEEDED) never become "y", must check for non-empty strings. To keep make 3.80 compatibility "$(if" used only. Fixes: 7da4d1e7 "buildsys: do not use $(and)". Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-05-18remove linuxthreads.new, rename linuxthreads.oldWaldemar Brodkorb
Linuxthreads.new isn't really useful with the existence of NPTL/TLS for well supported architectures. There is no reason to use LT.new for ARM/MIPS or other architectures supporting NPTL/TLS. It is not available for noMMU architectures like Blackfin or FR-V. To simplify the live of the few uClibc-ng developers, LT.new is removed and LT.old is renamed to LT. LINUXTHREADS_OLD -> UCLIBC_HAS_LINUXTHREADS
2016-04-18bump version for releasev1.0.14Waldemar Brodkorb
2016-03-31arm: simplify handling of Thumb related optionsThomas Petazzoni
Currently, the Thumb support on ARM has three related Config.in options, which are not trivial for users to understand, and are in fact not needed: - The USE_BX option is not needed: knowing whether BX is available or not is easy. If you have an ARM > v4 or ARMv4T, then BX is available, otherwise it's not. This is the logic used in glibc. - The USE_LDREXSTREX option is not needed: whenever Thumb2 is available, ldrex/strex are available, so we can simply rely on __thumb2__ to determine whether ldrex/strex should be used, without requiring a Config.in option. - Once USE_BX and USE_LDREXSTREX are removed, the only thing left that COMPILE_IN_THUMB does is to set -mthumb. This makes the option unnecessary, as on ARM at least, the user is already supposed to pass -march=<foo> or other compiler options tuning the library for a specific ARM variant. There is no reason to do otherwise for Thumb, which allows to get rid of the COMPILE_IN_THUMB option. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-13bump version for releasev1.0.13Waldemar Brodkorb
2016-02-07frv: resurrect port somehow, totally untestedWaldemar Brodkorb
The FR-V port is really broken, and I have no emulator or hardware for this platform. I tried to get some hardware from RedHat, who made the FR-V port initially. Unfortunately Fujitsi didn't agreed to sent me some of their unused spare hardware lying @RedHat. As I invested some time to get stuff compiled, I decided to add the code and may be anytime later I can gain access to some emulator or hardware. GDB simulator for FR-V doesn't support booting Linux AFAIK.
2016-01-31bump version for releasev1.0.12Waldemar Brodkorb
2016-01-10bump version for releasev1.0.11Waldemar Brodkorb
2016-01-09fix compile with DODEBUG=yWaldemar Brodkorb
Since more projects using two-stage cross-compile process we cannot add libgcc_eh.a unconditionally. We must check if a real file is referenced by the cross-compiler. Toolchains with --disabel-shared build have a single libgcc.a containing all required symbols. Tested with a debug build for x86.