Age | Commit message (Collapse) | Author |
|
prepare for stable release.
|
|
ld was (erroneously) complaining that it failed to merge private bfd
data. Silence this mismatch as seen on m68k with obfd binary.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Testing linker features has to be done against the correct linker.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
There is support for mips64(r1) already in uclibc, this change adds mips64r2
by adding the MIPS64R2 config variable and checking it in Rules.mak.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
For this port, I would like to give due credit to:
- Folks from Codito technologies (Sameer, Amit, Kanika, Ramana,...)
who did the very first port
- ARC UK from 2007-2009 (Joern, Irfan, Khurram, Phil...
- Late Brendan Kehoe (may he RIP)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
We run the linker through the compiler-driver, so we have to check
linker flags through the driver, too.
Otherwise we might check $LD's flags while we will run $CC's linker
and those might be different beasts.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
fix breakage from 603af30d
Removing the whitespace from findstring for 64 bit architectures has
bad consequences since powerpc would be a match in powerpc64 and sparc
would also be a match in sparc64.
That doesn't make them 64 bits in reality causing general breakage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
gcc (eg 4.7.3) hardcodes the MIPS64 interpreters like this:
(see gcc/config/linux.h and gcc/config/mips/linux64.h)
o32: UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
n32: UCLIBC_DYNAMIC_LINKERN32 "/lib32/ld-uClibc.so.0"
n64: UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0"
The existing check for MIPS64 in uClibc is wrong because it does
not respect the selected ABI
We fix this by explicitely checking the selected ABI instead of the
selected MIPS variant.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Anthony G. Basile <blueness@gentoo.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
You can set these yourself in your CFLAGS, and our list is incomplete
and pointless (we agreed some time ago to stop doing this).
We keep around CONFIG_[3456]86 because it is used to select between
different optimized subdirs of handcoded assembly.
Also take this opportunity to up the default to i686. If you're using
an older cpu, then you can handle changing this yourself.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
For anything but (toplevel) clean, CLEAN_%, we need .config
Otherwise realclean would leave stuff behind that was not intended to
survive.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
0c3eb2da578bc7ba2e74d240e3249dce62ec725e moved KCONFIG_CONFIG around and
that broke propagation of config-settings to the testsuite. Fix that.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Meta cores are 32-bit, hardware multithreaded, general purpose, embedded
processors which also feature a DSP instruction set, and can be found in
many digital radios. They are capable of running different operating
systems on different hardware threads, for example a digital radio might
run RTOSes for DAB decoding and audio decoding on 3 hardware threads,
and run Linux on the 4th hardware thread to manage the user interface,
networking etc. HTPs are also capable of running SMP Linux on multiple
hardware threads.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
TARGET_SUBARCH can only ever be set if TARGET_ARCH is set.
Only include SUBARCH includes if SUBARCH is non-empty.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This just makes it easier to read -- no functional changes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
with -O0 we (e.g. lockf) might end up with references to
_Unwind_Resume, so pull in gcc_eh in this case..
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Add the obsolescent SUSv3 family of user context manipulating functions
for arm, i386, mips, x86_64.
Signed-off-by: Timon ter Braak <timonterbraak@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fixes:
make distclean
mkdir /.config
make -C test/API clean
Reading makefile `../../.config' (search path) (don't care) (no ~ expansion)...
make: *** ../../.config: Is a directory. Stop.
write(1, "Reading makefile `../../.config'"..., 80) = 80
open("../../.config", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/include/../../.config", O_RDONLY) = 6
fstat(6, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
read(6, 0x7f2fe3bfc000, 4096) = -1 EISDIR (Is a directory)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
temporarily work around circular dependency in linking that was
introduced by 01c125c3bd8f949f8e5711e09152859eecd1b004
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Other compilers do not expect absolute path after -include,
they want to find the included file by path search (-I).
While there, prefer $(TARGET_ARCH) before common path.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Currently, the installed libubacktrace linker script entry always uses
HARDWIRED_ABSPATH semantics, even if HARDWIRED_ABSPATH is disabled:
$ grep GROUP $PREFIX/mipsel-linux-uclibc/sys-root/usr/lib/libc.so
GROUP ( libc.so.0 uclibc_nonshared.a AS_NEEDED ( ld-uClibc.so.0 ) )
GROUP ( AS_NEEDED ( /lib/libubacktrace.so.0 ) )
This causes problems when building a non-sysroot toolchain.
Move the AS_NEEDED insertion into libc/Makefile.in, and add a case to
the HARDWIRED_ABSPATH substitution command so libubacktrace is handled
the same way as the other libraries listed in the script.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Missing second expansion with _v.
This led to wrong args passed down to assembler.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The double slash variants are not documented (doc bug?) so better use
the single slash variants like we usually do.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
In some case where CROSS is defined to be empty
we define CROSS_COMPILE ?= CROSS so at this point
it will be defined but will be empty so check
for the same
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The spaces aren't handled correctly (currently) when outputting the
CFLAGS version of the linker flag.
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Need a little indirection/delayed evaluation to handle variables with
equal signs and commas in them.
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
As suggested by Bernhard, there is no point in evaluating the compiler's
flag availability when cleaning, so skip things in that case. If there
are variables that change targets based on the flags, then things are
already broken and need fixing independently.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Running `make clean` atm takes like 20 seconds because every subdir
re-evaluates all the toolchain flags. Add some helpers to automate
the process of setting up variables to cache the result of tests,
as well as the checking of an already set flag.
Now `make clean` takes like 2 seconds on my system.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
We source the .config file, so there should be no need to manually extract
it. If the sourcing doesn't work, then a lot of things break in this file.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Use CROSS_COMPILE instead of CROSS as other projects are doing
(i.e. kernel, busybox, buildroot).
CROSS is still supported for backward compatibility only
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Thanks to William Pitcock for noticing
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
UCLIBC_EXTRA_CFLAGS is currently added before the OPTIMIZATION flags
and OPTIMIZATION is chosen to be Os by default. But in OE we pass the optimisation
flags through UCLIBC_EXTRA_CFLAGS but they are not effective since -Os is
specified at last. So we need to change the order of these option flags
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Rely on the compiler to be correctly set up to generate
appropriate code for the target variant.
This exposes the Thumb option, as it is no longer auto-selected.
The "Use BX" no longer depends on supported CPU to be selected,
so it now defaults to 'n' as it shall work by default on CPUs
that do not have BX.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Add three new blind options to set use of Thumb mode:
- COMPILE_IN_THUMB_MODE
- if set, CFLAGS will contain -mthumb
- if unset, the compiler's default is used
- HAS_THUMB
- CPUS with Thumb instruction set can select this
- use of BX depends on this
- FORCE_THUMB
- CPUs that are Thumb-only must select this
- this selects: HAS_THUMB, COMPILE_IN_THUMB_MODE and USE_BX
Also, remove leading space in Rules.mak.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
make-3.80 does not have $(and) and $(or), so workaround for now.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|