summaryrefslogtreecommitdiff
path: root/Rules.mak
AgeCommit message (Collapse)Author
2015-03-08prepare for 1.0.1v1.0.1Waldemar Brodkorb
2015-02-20sync with uClibcWaldemar Brodkorb
2015-02-20ARCv2 ISA supportVineet Gupta
This is next gen Instruction Set Architecture from Synopsys and basis for the ARC HS family of processors. http://www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor&elq_mid=5732&elq_cid=458802 http://www.synopsys.com/IP/ProcessorIP/ARCProcessors/arc-hs/Pages/default.aspx Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2015-02-15merge uClibc upstream changesWaldemar Brodkorb
2015-02-14Revert "resolve merge"Waldemar Brodkorb
This reverts commit 6b6ede3d15f04fe825cfa9f697507457e3640344.
2015-02-14resolve mergeWaldemar Brodkorb
2015-02-12Update MIPS configuration rules.Steve Ellcey
Add a configuration choice for the NaN format on MIPS (either the standard (legacy) format or the newer IEEE 2008 format. Change how CPU_LDFLAGS are set for MIPS. Use the same value as CPU_CFLAGS since CC is used to do linking. This ensures consistency between compiles and links and adds support for N32 ABI to linking. Signed-off-by: Steve Ellcey <sellcey@imgtec.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2015-02-12really fix tests after getopt long changesWaldemar Brodkorb
uClibc changed getopt handling for testsuite, last merge with uClibc breaked it again for uClibc-ng.
2015-02-02mark 1.0.0 releasev1.0.0Waldemar Brodkorb
2014-12-28remove commentWaldemar Brodkorb
2014-12-26don't optimize for special mips cpuWaldemar Brodkorb
When building optimized code for Lemote Yeelong system, a conflict occurs. Better use optimized flags in your buildsystem, not in uClibc-ng.
2014-12-04Merge remote-tracking branch 'origin/upstream'Waldemar Brodkorb
2014-12-03buildsys: remove some obsolete optimization CFLAGSBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-10-03disable linkage of gcc_ehWaldemar Brodkorb
As recently discussed on the uClibc mailing list here: http://lists.uclibc.org/pipermail/uclibc/2014-September/048659.html I think it is not required for gcc 4.8.3, which is default in f.e. OpenADK. Tested with a DODEBUG build for x86.
2014-09-17Merge remote-tracking branch 'origin/upstream'Waldemar Brodkorb
2014-09-16buildsys: fix IS_IN_lib*Bernhard Reutner-Fischer
define NOT_IN_libc / IS_IN_libxxx appropriately to fix pthread_once Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-09-09Merge remote-tracking branch 'origin/upstream'Waldemar Brodkorb
2014-09-09buildsys: Fix typoBernhard Reutner-Fischer
LDFLAG-fuse-ld looked at a non-existing var, use the correct one Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-09-08bump version to 1.0.0Waldemar Brodkorb
prepare for stable release.
2014-09-04buildsys: tweak check_ld flag probingBernhard Reutner-Fischer
ld was (erroneously) complaining that it failed to merge private bfd data. Silence this mismatch as seen on m68k with obfd binary. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-08-26buildsys: remove duplicate UCLIBC_EXTRA_CFLAGSBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-02-15buildsys: pass correct linker to compiler driverBernhard Reutner-Fischer
Testing linker features has to be done against the correct linker. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-02-15buildsys: Add MIPS64R2 supportSteve Ellcey
There is support for mips64(r1) already in uclibc, this change adds mips64r2 by adding the MIPS64R2 config variable and checking it in Rules.mak. Signed-off-by: Steve Ellcey <sellcey@mips.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20ARC port to uClibcVineet Gupta
For this port, I would like to give due credit to: - Folks from Codito technologies (Sameer, Amit, Kanika, Ramana,...) who did the very first port - ARC UK from 2007-2009 (Joern, Irfan, Khurram, Phil... - Late Brendan Kehoe (may he RIP) Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20buildsys: add TODO reminderBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-13buildsys: check LDFLAGS through driverBernhard Reutner-Fischer
We run the linker through the compiler-driver, so we have to check linker flags through the driver, too. Otherwise we might check $LD's flags while we will run $CC's linker and those might be different beasts. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-06pull kconfig from linux-3.11Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-07-26Rules.mak: Fix setting arch native bitGustavo Zacarias
fix breakage from 603af30d Removing the whitespace from findstring for 64 bit architectures has bad consequences since powerpc would be a match in powerpc64 and sparc would also be a match in sparc64. That doesn't make them 64 bits in reality causing general breakage. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-07-19Rules.mak: MIPS64: Select correct interpreterMarkos Chandras
gcc (eg 4.7.3) hardcodes the MIPS64 interpreters like this: (see gcc/config/linux.h and gcc/config/mips/linux64.h) o32: UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0" n32: UCLIBC_DYNAMIC_LINKERN32 "/lib32/ld-uClibc.so.0" n64: UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0" The existing check for MIPS64 in uClibc is wrong because it does not respect the selected ABI We fix this by explicitely checking the selected ABI instead of the selected MIPS variant. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Anthony G. Basile <blueness@gentoo.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-05-19i386: punt all config options that just control -marchMike Frysinger
You can set these yourself in your CFLAGS, and our list is incomplete and pointless (we agreed some time ago to stop doing this). We keep around CONFIG_[3456]86 because it is used to select between different optimized subdirs of handcoded assembly. Also take this opportunity to up the default to i686. If you're using an older cpu, then you can handle changing this yourself. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-04-04buildsys: fix realcleanBernhard Reutner-Fischer
For anything but (toplevel) clean, CLEAN_%, we need .config Otherwise realclean would leave stuff behind that was not intended to survive. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-03-20test: fix non-O checkingBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-03-14test: add missing top_srcdirBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-03-14buildsys: tweak KCONFIG_CONFIG exportBernhard Reutner-Fischer
0c3eb2da578bc7ba2e74d240e3249dce62ec725e moved KCONFIG_CONFIG around and that broke propagation of config-settings to the testsuite. Fix that. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-03-14Add support for the Meta architectureMarkos Chandras
Meta cores are 32-bit, hardware multithreaded, general purpose, embedded processors which also feature a DSP instruction set, and can be found in many digital radios. They are capable of running different operating systems on different hardware threads, for example a digital radio might run RTOSes for DAB decoding and audio decoding on 3 hardware threads, and run Linux on the 4th hardware thread to manage the user interface, networking etc. HTPs are also capable of running SMP Linux on multiple hardware threads. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-02-05libpthread: Fix handling of SUBARCH includesBernhard Reutner-Fischer
TARGET_SUBARCH can only ever be set if TARGET_ARCH is set. Only include SUBARCH includes if SUBARCH is non-empty. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-01-26buildsys: clean up path scrubbing a bitMike Frysinger
This just makes it easier to read -- no functional changes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-01-16buildsys: link libgcc_eh if DODEBUGBernhard Reutner-Fischer
with -O0 we (e.g. lockf) might end up with references to _Unwind_Resume, so pull in gcc_eh in this case.. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-01-10libc: add {get,set,swap,make}context user context manipulation functionsFlorian Fainelli
Add the obsolescent SUSv3 family of user context manipulating functions for arm, i386, mips, x86_64. Signed-off-by: Timon ter Braak <timonterbraak@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-01-08buildsys: prevent make from searching for .configBernhard Reutner-Fischer
Fixes: make distclean mkdir /.config make -C test/API clean Reading makefile `../../.config' (search path) (don't care) (no ~ expansion)... make: *** ../../.config: Is a directory. Stop. write(1, "Reading makefile `../../.config'"..., 80) = 80 open("../../.config", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/include/../../.config", O_RDONLY) = 6 fstat(6, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 read(6, 0x7f2fe3bfc000, 4096) = -1 EISDIR (Is a directory) Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-18Revert: buildsys: clean up libubacktrace linker script handlingKevin Cernekee
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15libubacktrace: temporarily workaround link issueBernhard Reutner-Fischer
temporarily work around circular dependency in linking that was introduced by 01c125c3bd8f949f8e5711e09152859eecd1b004 Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15Rules.mak: add ldso search paths independently of NPTLPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15Rules.mak: include KERNEL_HEADERS last, even there it is wrongPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15Rules.mak: change the way -include is usedPeter S. Mazinger
Other compilers do not expect absolute path after -include, they want to find the included file by path search (-I). While there, prefer $(TARGET_ARCH) before common path. Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-13buildsys: clean up libubacktrace linker script handlingKevin Cernekee
Currently, the installed libubacktrace linker script entry always uses HARDWIRED_ABSPATH semantics, even if HARDWIRED_ABSPATH is disabled: $ grep GROUP $PREFIX/mipsel-linux-uclibc/sys-root/usr/lib/libc.so GROUP ( libc.so.0 uclibc_nonshared.a AS_NEEDED ( ld-uClibc.so.0 ) ) GROUP ( AS_NEEDED ( /lib/libubacktrace.so.0 ) ) This causes problems when building a non-sysroot toolchain. Move the AS_NEEDED insertion into libc/Makefile.in, and add a case to the HARDWIRED_ABSPATH substitution command so libubacktrace is handled the same way as the other libraries listed in the script. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-03-27buildsys: Fix typo in check-as-var handlingBernhard Reutner-Fischer
Missing second expansion with _v. This led to wrong args passed down to assembler. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-02-01bump version to 0.9.34-gitBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-02-01Release 0.9.33Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-26buildsys: use single slash version of -print-whateverBernhard Reutner-Fischer
The double slash variants are not documented (doc bug?) so better use the single slash variants like we usually do. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 18:22:37 +0000