summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-31arc: clone: Simplify CLONE_THREAD detectionAlexey Brodkin
This change was inspired by similar change in glibc: https://sourceware.org/git/?p=glibc.git;a=commit;h=0cb313f7cb0e418b3d56f3a2ac69790522ab825d Current Linux kernel requires CLONE_VM to be set with CLONE_THREAD otherwise returning -EINVAL, see man clone2. This means we don't need to check for both CLONE_THREAD and CLONE_VM instead we may simplify code a lot and just check 1 bit (CLONE_THREAD). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-07-31arc: clone: Fix CLONE_THREAD detectionAlexey Brodkin
For thread group case (CLONE_THREAD), the cached PID of new process/thread need not be reset. The old logic to decide that was flawed as it would be true only for exact combination of CLONE_THREAD + _VM, but would fail for CLONE_THREAD + _VM + _xyz. More detailed tear-down of current and new code below. Current implementation is: --------------------->8-------------------- ; r12 contains clone flags mov_s r2, CLONE_THREAD_N_VM; r2 contains bit mask and_s r2, r2, r12 ; r2 contains bit mask AND clone flags ; but r12 still contains the same flags brne r2, r12, .Lgo_thread ; here we compare modified mask with ; flags as they were and skip pthread TID/PID ; setup if r2 != r12 which happens all ; the time except clone flags were ; exactly CLONE_THREAD | CLONE_VM --------------------->8-------------------- New implementation is: --------------------->8-------------------- ; r12 contains clone flags mov_s r2, CLONE_THREAD_N_VM; r2 contains bit mask and_s r12, r12, r2 ; r12 contains clone flags AND bit mask ; i.e. we did mask all flags except ; CLONE_THREAD and CLONE_VM breq r2, r12, .Lgo_thread ; here we compare masked flags with ; target mask and if they match we skip ; pthread TID/PID setup --------------------->8-------------------- Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-07-31arc: clone: Recover PID correctlyAlexey Brodkin
Caught by tst-getpid1 test from uClibc's test-suite. It looks like original implementation was not correct. The code in question is supposed to recover PID of the new thread. And by no means that could happen with clone() syscall while getpid() does exactly this. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: Eugeniy Paltsev <paltsev@synopsys.com>
2016-07-31ARC: Support R_ARC_JMP_SLOT relocations during bootstrapAndrew Burgess
This commit adds support for R_ARC_JMP_SLOT relocations during the bootstrap phase of the dynamic linker. These relocations will be generated if uClibc-ng is configured with 'DODEBUG=y'.
2016-07-31remove unused code, RTLD_PRIVATE_ERRNO is never definedWaldemar Brodkorb
2016-07-31deduplicate jmpbuf-unwind.hWaldemar Brodkorb
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-31test: reorganize tls macros in separate architecture filesWaldemar Brodkorb
To be more consistent separate all TLS macros in separate files and remove obsolete macros for not supported architectures. Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-17cleanup CALL_MCOUNT / PROFWaldemar Brodkorb
As this is only implemented for a few architecture and not well tested, just remove it.
2016-07-17x86_64: remove dead code, SHARED is not defined when compilingWaldemar Brodkorb
2016-07-17cleanup PTR_MANGLE/PTR_DEMANGLE supportWaldemar Brodkorb
As this is only implemented for a few architecture and not well tested, just remove it. Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-17mips: add regdef.h glibc compatibility headerWaldemar Brodkorb
2016-07-10x86_64: use C implementation for pthread_cond_wait/pthread_cond_timedwaitWaldemar Brodkorb
Add test case for the deadlock detection. Reported-By: Martin Willi <martin@strongswan.org>
2016-07-10x86_64: refresh ULPsWaldemar Brodkorb
2016-07-07The file list is at the beginning nowMartin Thomas
Signed-off-by: Martin Thomas <mtdev@hamtam.de>
2016-07-06bfin: allow to build lddWaldemar Brodkorb
2016-07-03arm: cleanup redundant macros for syscallsWaldemar Brodkorb
In uClibc-ng the syscall macros are in bits/syscalls.h.
2016-07-03bump for releasev1.0.16Waldemar Brodkorb
2016-06-30Add nds32 maintainersWaldemar Brodkorb
2016-06-30nds32: add support for new architectureWaldemar Brodkorb
Add support for Andes Technology NDS32 architecture. See here http://www.andestech.com/en/index/index.htm for more informaton. Verification of the port from an older uClibc port was done on a sponsored AG101p board. The testsuite only has 5 errors, three are related to an existing bug in dlclose() with LT.old, also happening on cris32 and m68k. Failures to fallocate/posix_fallocate are unresolved. Thanks to Andes Technology sponsoring the hardware and being very helpful while doing the uClibc-ng porting. Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-06-25bits/sigset.h: Fix _EXTERN_INLINE redefinitionLeonid Lisovskiy
Commit 251a3c19cb "sleep: employ __USE_EXTERN_INLINES (with necessary fixes)" introduces following problems: 1. __USE_EXTERN_INLINES forcibly enabled build fails ... LD libuClibc-1.0.15.so libc/libc_so.a(cmsg_nxthdr.os): In function `__GI___cmsg_nxthdr': cmsg_nxthdr.c:(.text.__GI___cmsg_nxthdr+0x0): multiple definition of `__GI___cmsg_nxthdr' libc/libc_so.a(close.os):close.c:(.text.__GI___cmsg_nxthdr+0x0): first defined here libc/libc_so.a(creat.os): In function `__GI___cmsg_nxthdr': creat.c:(.text.__GI___cmsg_nxthdr+0x0): multiple definition of `__GI___cmsg_nxthdr' libc/libc_so.a(close.os):close.c:(.text.__GI___cmsg_nxthdr+0x0): first defined here ... 2. libuargp wrongly contains __cmsg_nxthdr/__sigismember/__sigdelset/__sigaddset global symbols on platforms which includes signal.h from sys/procfs.h As result, static linking will fail: TEST_LINK argp/ bug-argp1 /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libc.a(sigsetops.os): In function `__GI___sigismember': sigsetops.c:(.text+0x0): multiple definition of `__sigismember' /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libuargp.a(argp-xinl.os):argp-xinl.c:(.text+0x0): first defined here /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libc.a(sigsetops.os): In function `__GI___sigaddset': sigsetops.c:(.text+0x28): multiple definition of `__sigaddset' /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libuargp.a(argp-xinl.os):argp-xinl.c:(.text+0x28): first defined here /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libc.a(sigsetops.os): In function `__GI___sigdelset': sigsetops.c:(.text+0x4c): multiple definition of `__sigdelset' /home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libuargp.a(argp-xinl.os):argp-xinl.c:(.text+0x4c): first defined here We have to partially revert 251a3c19cb to fix problems above. It is safe to do this after commit 162cfaea20 *: inline constant __sig{add,del}set and __sigismember since we are able to use new inlines from within libc and leave the rest of world(__USE_EXTERN_INLINES) equal to glibc now. Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-06-24inet/resolv: Try search domains first for unqualified namesIngo van Lil
When resolving an unqualified host name, the resolver tries the original name first before appending the domains from the search list. If a TLD with the same name exists, the query will succeed (but yield no A record) and the resolver will return HOST_NOT_FOUND without trying the search domains. This patch changes the lookup order for unqualified host names (without dots) to try the search domains first and the original name last. Signed-off-by: Ingo van Lil <inguin@gmx.de>
2016-06-23ARC: Enable shared crt1Vineet Gupta
Currently crt1 takes address of functions (main,_init,_fini) directly which doesn't generate truely position independent code, but zero based values instead. e.g. | __start: | ... | add_s r2,sp,0x4 | mov_s r0, main generates to | 000156ec <__start>: | ... | 156f4: add_s r2,sp,0x4 | 156f6: mov_s r0,0x15f7c | ... | 00015f7c <main>: | 15f7c: push_s blink This works just fine for the normal (non PIE) dynamic executables since they are loaded at address 0. However this is not true for PIE executables. So for Scrt1 we use a true position independent way when taking function addresses. Cc: uclibc@uclibc.org <uclibc@uclibc.org> Cc: devel@uclibc-ng.org <devel@uclibc-ng.org> Cc: Cupertino Miranda <cmiranda@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-06-23libs: install backward compatibility symlinksAlexey Brodkin
Simplify the switch from uClibc to uClibc-ng. Apps already built against uClibc-0.9.x.y require .so.0 libs to present on target which in case of current uClibc-ng is not the case and those apps could not be run. This change creates symlinks from .so.1 to .so.0 for most of other libs in the same way as it was done by 23e96d89b6ab "ldso: install backward compatibility symlink by default" Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Waldemar Brodkorb <wbx@uclibc-ng.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Anton Kolesov <akolesov@synopsys.com>
2016-06-23ARC: remove deprecated -msoft-float from CFLAGSAlexey Brodkin
"-msoft-float" makes no sense for ARC because there's no such thing as "-mhard-float" on ARC. Instead we use our own "-mfpu=XXX" option when a particular floating-point related HW feature is enabled in the ARC core. We used to live with that phony option for quite some time but with migration to newer GCC following warning now appears: -------------------->8----------------- arc-linux-gcc: warning: ‘-msoft-float’ is deprecated cc1: warning: ‘-msoft-float’ is deprecated [enabled by default] -------------------->8----------------- And that warning gets printed for each invocation of gcc with the option in question, which makes compilation output barely readable. So we disable that phony option for ARC now. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Waldemar Brodkorb <wbx@uclibc-ng.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Anton Kolesov <akolesov@synopsys.com>
2016-06-23ARC: Implement .note.ABI-tag section in crt1.SAnton Kolesov
Linux Standard Base specifies section .note.ABI-tag that can be considered as a marker for ELF files targeted to Linux systems. See https://refspecs.linuxfoundation.org/LSB_1.2.0/gLSB/noteabitag.html This section, for example, is used by the GDB to identify Linux ELFs as compared to baremetal ELFs that do not have this section. Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
2016-06-22ldso: fix dlsym hang when reloading DSOsLeonid Lisovskiy
It can happen under certain cases that the DSO had refcount 0, but was already loaded. (NODELETE flag is set, or it is pulled in via both NEEDED dependency and explicit dlopen()). Add extra reference count for NODELETE objects, this will ensure that the reference count never drops below one. It is improved version of http://lists.busybox.net/pipermail/uclibc/2013-June/047826.html Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-06-22ldso: Consistently set & use DL_OPENED flag in both ld.so and libdlLeonid Lisovskiy
Previously, DL_OPENED flag was set in libdl only and never used. Set it centralized in _dl_load_elf_shared_library() & use it in both ld.so and libdl. Additionally, rename it to DL_OPENED2 for clarity. Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-06-22test: inet: Fix warning messagesEugeniy Paltsev
This patch is to address a proposal by Waldemar in this thread: http://mailman.uclibc-ng.org/pipermail/devel/2016-June/001006.html tst-ethers-line and tst-ethers require /etc/ethers to exist, otherwise user should create it manually. Add this info to warning message. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2016-06-21inet/getaddrinfo: fix AF_V4MAPPED behavior for non IPv6 host resolutionWenzel, Alexander
When trying to resolve a hostname by getaddrinfo() using some specific settings, it will always return -EAI_NONAME (Name or service not known). To reproduce this behavior, you need to request an IPv6 address with the additional AF_V4MAPPED flag set from an non IPv6 capable hostname. If you choose a IPv4/IPv6 capable hostname like google.com, everything works fine. This patch is more or less a port [1][2] from the glibc and their behavior for the AF_V4MAPPED flag. To test the bug you can use the following snippet. ---- 8< ---- int ret; struct addrinfo* result; struct addrinfo hints; memset(&hints, 0, sizeof(struct addrinfo)); hints.ai_family = AF_INET6; hints.ai_flags = AI_V4MAPPED; ret = getaddrinfo("test.com", NULL, &hints, &result); printf("getaddrinfo(): %i", ret); ---- 8< ---- [1] https://sourceware.org/git/?p=glibc.git;a=commit;f=sysdeps/posix/getaddrinfo.c;h=925c3c5c71596c02f7e58a0ffcdcaae44eb065c1 [2] https://sourceware.org/git/?p=glibc.git;a=commit;f=sysdeps/posix/getaddrinfo.c;h=28977c2c1acb789660ad47e0d88e42486059c916 Signed-off-by: Alexander Wenzel <alexander.wenzel@qsc.de>
2016-06-19bugfix: ARM: memset.S: use unsigned comparisonsLucian Cojocar
The 'BLT' instruction checks for *signed* values. So if a3, length parameter of memset, is negative, then value added to the PC will be large. memset(buf, 0xaa, 0xffff0000) triggers the bug. GDB session without the patch: """ $ gdb ./main-buggy-memset.elf -q Reading symbols from ./main-buggy-memset.elf...done. (gdb) x/i memset 0x8770 <memset>: mov r3, r0 (gdb) r Starting program: /root/memset/main-buggy-memset.elf Program received signal SIGSEGV, Segmentation fault. 0x00048808 in ?? () """ The $pc is outside of the memset function because: """ (gdb) x/i $pc => 0x87e4 <memset+116>: add pc, pc, r2, lsl #2 (gdb) info reg $r2 r2 0x10007 65543 """ GDB session with the bug fixed (patch applied): """ $ gdb ./main-fixed-memset.elf -q Reading symbols from ./main-fixed-memset.elf...done. (gdb) x/i memset 0x8770 <memset>: mov r3, r0 (gdb) r Starting program: /root/memset/main-fixed-memset.elf Program received signal SIGSEGV, Segmentation fault. memset () at libc/string/arm/memset.S:92 92 libc/string/arm/memset.S: No such file or directory. (gdb) x/i $pc => 0x87b0 <memset+64>: stmia r3!, {r1, r12} (gdb) info reg $r3 r3 0x15000 86016 (gdb) info proc mappings process 5822 Mapped address spaces: Start Addr End Addr Size Offset objfile 0x8000 0xb000 0x3000 0x0 /root/memset/main-fixed-memset.elf 0x12000 0x15000 0x3000 0x2000 /root/memset/main-fixed-memset.elf 0xb6fff000 0xb7000000 0x1000 0x0 [sigpage] 0xbefdf000 0xbf000000 0x21000 0x0 0xffff0000 0xffff1000 0x1000 0x0 [vectors] (gdb) info reg $sp sp 0x14d78 0x14d78 """ GDB crashes inside the memset function, on the store instruction. This time the crash is (as expected) because of a memory access imediately after the memory region that contains the stack -- the buffer that's being memset'd is allocated on the stack. Signed-off-by: Lucian Cojocar <lucian.cojocar@vu.nl>
2016-06-19argp: select getopt / getopt_longWaldemar Brodkorb
Select required features. Fix intendation. Reported-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-06-19or1k: add dummy sys/user.h for straceWaldemar Brodkorb
2016-06-18remove unused MakefilesWaldemar Brodkorb
2016-06-16test: regex: Make testregex return error countVlad Zakharov
Testregex returned 0 even when some sub-tests inside the testregex failed. Now it returns error count. Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
2016-06-15Fix hardcoded mmap offsetEugeniy Paltsev
mmap offset must be a multiple of the page size. It was hardcoded to 4K, so mmap2 test failed on non-4K page size architectures. Now we get page size using sysconf(_SC_PAGE_SIZE). Build and run tests done on nsim arc hs38. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2016-06-15sysconf: Support _SC_(AV)?PHYS_PAGES.Nicolas Cavallari
Do it by following the trail of the existing commented code, which implemented it by calling get_phys_pages() and get_avphys_pages(). This patch implements these two functions, which are also glibc extensions. Some program/libraries (e.g. libuv) assumes that sysconf(_SC_PHYS_PAGES) works on linux and never check for -1, thus they report an insane amount of memory. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
2016-06-15test: mmap2 is not ARM specificWaldemar Brodkorb
2016-06-13add MAINTAINERS informationWaldemar Brodkorb
2016-06-12tests: add %ms scanf format testMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-06-12Fix return value of fwrite when a 'hard' error occursJan Vangorp
When a 'hard' error occurs, fwrite reports that all data was written or buffered even if that is not the case. It should report how much data was actually written and buffered. Signed-off-by: Jan Vangorp <jan.vangorp_ext@softathome.com>
2016-06-12Fix infinite loop when fopencookie custom write returns 0 on errorJan Vangorp
The man page for fopencookie prescribes that custom write functions should return 0 on error (and should definitely not return a negative value) [1]. However, the uClibc implementation expects a negative return value in case of an error (libc/stdio/_WRITE.c). If the write function returns 0 on error, we drop into an infinite loop if the error persists. This patch wraps the user supplied write function such that a 0 return value is converted to -1. errno is first set to EAGAIN such that if the custom write function does not set errno in case of error, this is treated as a "soft" error. Custom write functions that cater towards uClibc and _do_ return a negative value are not affected. If no custom write function is supplied, set errno to EINVAL such that this condition is treated as a "hard" error. Previously the behaviour depended on whether the last error before the write happened to be a "hard" or a "soft" error. [1] http://git.kernel.org/cgit/docs/man-pages/man-pages.git/tree/man3/fopencookie.3?id=6c0d0ef0c7a9c4bcf805c6f9e9bc1ef1c3865ea0#n164 Signed-off-by: Jan Vangorp <jan.vangorp_ext@softathome.com>
2016-06-12xtensa: use generic lowlevellockWaldemar Brodkorb
Simplify and use generic lowlevellock. Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org> Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-06-12metag: use generic lowlevellockWaldemar Brodkorb
Simplify and use generic lowlevellock. Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org> Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-06-12arc: use generic lowlevellockWaldemar Brodkorb
Simplify and use generic lowlevellock. Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org> Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-06-08test: add new mmap tests from glibcWaldemar Brodkorb
Rename mmap2 test as this is a ARM specific test, only execute on ARM systems. Add more new tests from glibc.
2016-06-07ssp: remove SSP legacy codeWaldemar Brodkorb
Nobody should use gcc 3.3 nowadays.
2016-06-07microblaze: remove unused dead codeWaldemar Brodkorb
These files are not used, no regression found while running the testsuite.
2016-06-05test: quieten some gcc warningsWaldemar Brodkorb
Fix some gcc warnings while compiling the testsuite.
2016-06-04test: sync with GNU libcWaldemar Brodkorb
See here: https://sourceware.org/git/gitweb.cgi?p=glibc.git;a=commit;h=900056024b75eae8b550d7fee1dec9e71f28344e Fixes testsuite runs on newer kernels.
2016-06-03ppc: cleanup unsupported ppc64 codeWaldemar Brodkorb
Remove ppc64 bits and bytes, as we don't support ppc64 and it makes the code more readable without the dead code.