summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-15libc: Fix sync_file_range.c for MIPS64 N32 ABISteve Ellcey
The special sync_file_range handling is only needed for the O32 ABI (regardless of whether it is on mips32 or mips64). The N32 (and N64) ABI's should both use the standard code. This routine was using the special code for the N32 ABI because that ABI has a word size of 32 bits and that is wrong. This patch fixes it by checking the ABI used instead of checking the word size. Signed-off-by: Steve Ellcey <sellcey@mips.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-02-15test/tls/tst-tls[6-8]: Fix build errorsVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-02-15libc: silence warning in ftsBernhard Reutner-Fischer
cderrno is dead code, comment it out. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-02-02libc: mips: Fix setjmp/longjmp for MIPS64 N64 ABIWaldemar Brodkorb
When booting a Linux system with qemu-system-mips64 the execution of $(pwd) in the ash shell triggers a segmentation fault. Ash uses setjmp/longjmp for exception handling. After looking at the glibc implementation, I found some differences, with this patch tries to resolve. Now the system boots up fine and no segmentation faults occur. The global pointer should be restored and the types for the register values should be wide enough. See: http://www.cygwin.com/ml/libc-alpha/2003-03/msg00363.html Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-02-02mips: silence 'set but not used' warningsSteve Ellcey
This patch uses 'attribute_unused' to clean up a number of warnings messages that are generated when doing a MIPS build. All of the changes are in MIPS specific files and there are no code changes other then adding the unused attribute where needed. Signed-off-by: Steve Ellcey <sellcey@mips.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-02-02libc: mips: Fix non-LFS buildSteve Ellcey
The MIPS build is failing when UCLIBC_HAS_LFS is set to "n" because posix_fadvise64.c is included in the build when it should not be. Signed-off-by: Steve Ellcey <sellcey@mips.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-24mips: silence _ABI* undef warningsBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-22powerpc: syscall support up to 6 argumentsBernhard Reutner-Fischer
As reported by Kristof Provost. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-22vfork: fix clone based versionStefan Kristiansson
The clone based version was introduced by commit 58570fc8e1fd601f15be5758ab95013d56771804 vfork: Use clone if arch does not have the vfork syscall but the code was made unreachable by the previous commit 0a043c30ee71245dfe7c9d82d654312c5e1f6127 vfork: make all archs consistent that adds a guard which require either __NR_vfork or __NR_fork to be set. Neither will be set on an arch that would need to use the clone based version. The double declaration of vfork was also introduced by the merge of the two above mentioned patches. The missing ; was present in the original patch. CC: Markos Chandras <markos.chandras@imgtec.com> CC: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> CC: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-22libc: fix MIPS N64 forkWaldemar Brodkorb
fork() is broken for MIPS64 N64 ABI. You can check it with a simple C program statically linked with qemu-mips64 user emulation. Internally fork() is using the clone system call (at least with NPTL) with 5 arguments. See ./libpthread/nptl/sysdeps/unix/sysv/linux/i386/fork.c. The calling conventions for MIPS N32 and N64 allow to use up to 8 registers for that. See http://en.wikipedia.org/wiki/Calling_convention#MIPS This is correctly implemented in libc/sysdeps/linux/mips/bits/syscalls.h, but not in libc/sysdeps/linux/mips/sysdep.h. fork.c uses the later one. It seems that fork() works fine for MIPS64 N32 with just using the stack like with the O32 case. There is a user of INLINE_SYSCALL with 7 arguments in libc/sysdeps/linux/common/sync_file_range.c for MIPS64 N32, so I decided to only use the macros for the MIPS64 N64 case. With this patch my uClibc based Linux system boots up fine in qemu-system-mips64. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-15nptl: Fix arm pt-vforkBernhard Reutner-Fischer
We were ending up with an unrecognised CPP token (which is not diagnosed for assembler-with-cpp, 59805) Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-15libc: add guard for arm thumb2 asmBernhard Reutner-Fischer
Fixes gen_lowlevelrobustlock on thumb2 Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-15ldso: arm, metag: Use runtime pagesizeBernhard Reutner-Fischer
Use the generic runtime pagesize as per ce54b92b046b65464e2d16b3842f3e97e3e0f27e Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-14buildsys: metag: Remove inappropriate commentBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-08ARC: opencode ENTRY/END macros in crt1Vineet Gupta
crt1.S -> include sysdep.h -> include sysnum.h In multistage gcc build, Buildroot happens to build crt1.S before sysnum.h is generated. So break the above include chain and opencode the ENTRY/END macros. Reported-by: Anton Kolesov <akolesov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-08buildsys: store savedefconfig to defconfig fileVineet Gupta
It now generated a file name defconfig in current directory Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-08xtensa: use common ptrace.hBaruch Siach
Adds support for architecture independent actions. Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-08libc: posix_fadvise: restore implementation for xtensaBaruch Siach
Commit ee84b8b400 (linux: posix_fadvise: use new SYSCALL_ALIGN_64BIT) removed posix_fadvise implementation for xtensa, since xtensa does not define __NR_fadvise64. Reuse the ARM support code to restore xtensa support. This commit is based Mike Frysinger's suggested patch. Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-08siginfo.h: __SIGEV_PAD_SIZE takes __WORDSIZE into accountVicente Olivert Riera
Make __SIGEV_PAD_SIZE to take __WORDSIZE into account for alpha, mips and ia64 arches. Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-08siginfo.h: add a missing function member on ia64, mips and sparc archesVicente Olivert Riera
Add "__pid_t _tid" member which is used for some packages, like rt-test for instance, which fails with an error like this one: src/cyclictest/cyclictest.c:638:9: error: 'union <anonymous>' has no member named '_tid' Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-08buildsys: update unifdefBernhard Reutner-Fischer
sync up to 1542ea42da59018860a987f34f065cd120982e8c (2.10 + cleaner exit status handling) Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-07buildsys: fixup unifdef state in skiphash, linenumBernhard Reutner-Fischer
amend to fixup line-numbering in the unifdefile Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-01-07buildsys: fixup unifdef state in skiphashBernhard Reutner-Fischer
attempt to fix unifdef swallowing -f defundefile lines Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-23elf: Add ARC Magic and RelocationsVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20ldso: ARC: tweak whitespace some moreBernhard Reutner-Fischer
Use spaces instead of tabs in the table to accomodate different tab settings. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20ldso: ARC whitespace tweaksVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20inet: Fix threaded res_initKenneth Soerensen
In a multi-threaded application where res_init() was called either directly or implicitly, getaddrinfo() and others failed to add the DNS search domain to hostnames. This problem made it not possible to look up a hostname without its domain appended. The problem is caused by res_sync_func() overwriting the configuration read by __open_nameservers() immediately after it is read. The suggested solutin is to disable res_sync_func() while reading name server configuration in res_init(). Signed-off-by: Kenneth Soerensen <kenneth.sorensen@spectralink.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20librt: fix mq_timed{send,receive} return instructionsBaruch Siach
Not all architectures use 'ret' as function return instruction. For example, xtensa usually uses 'retw'. Use the ret_ERRVAL arch dependant macro instead. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20libc/sysdeps: commonize ret_ERRVALBaruch Siach
* Add a common ret_ERRVAL definition * Remove ret_ERRVAL from architectures using the common 'ret' * Add 'undef' to architectures that need a different return instruction * Add '#include <common/sysdep.h>' to cris and ia64 that were missing it Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20ARC defconfigsVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20ARC port to uClibcVineet Gupta
For this port, I would like to give due credit to: - Folks from Codito technologies (Sameer, Amit, Kanika, Ramana,...) who did the very first port - ARC UK from 2007-2009 (Joern, Irfan, Khurram, Phil... - Late Brendan Kehoe (may he RIP) Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20string: Add ARC supportJoern Rennecke
Signed-off-by: Joern Rennecke <joern.rennecke@embecosm.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20LT.old: Add ARC supportVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20ldso: Add ARC supportVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20ldd: Add ARC supportVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20Fix for SIGBUS error on MIPS64 with N64 ABIWaldemar Brodkorb
When accessing errno, a per thread variable, from _stdio_init a SIGBUS error happens. This change fixes the wrong relocation and debug output. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20NPTL: fork: relief register pressure on arm thumb1Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20ldso: use unlikely macroBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20buildsys: Fix error on config clean in realcleanBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-12-20buildsys: add TODO reminderBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-19buildsys: update unifdefBernhard Reutner-Fischer
sync up to 55501a61dd257e941d53f175350ee52fc6ff2866 (2.9 + refactor keyword and symbol matching) Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-13buildsys: check LDFLAGS through driverBernhard Reutner-Fischer
We run the linker through the compiler-driver, so we have to check linker flags through the driver, too. Otherwise we might check $LD's flags while we will run $CC's linker and those might be different beasts. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-12ldso: silence warnings in debug codeBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-12Make res_init() thread safe.Kenneth Soerensen
res_init() was not atomic, which could give undesired behaviour. Now res_init() is completely locked under one lock and the locking is removed from __res_vinit(). Signed-off-by: Kenneth Soerensen <kenneth.sorensen@spectralink.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-12Fix threaded use of res_ functions.Sørensen, Kenneth
Commit aab4df0fb51660300559f5f29290709db2f7bfee says that the line with after res_init() function. Commit 7f74de5d4d6d10baafab4b37bb3d472f5c5f0e8c moves the res_init() function below the line with #undef _res. This commit moves res_init() back above #undef _res. Signed-off-by: Kenneth Soerensen <kenneth.sorensen@spectralink.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-11buildsys: document savedefconfig in helpBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-11buildsys: on realclean, rm include/{config,generated}Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-06buildsys: rm PT startfiles on realcleanBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-06time.c: make ll_tzname* static againBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-11-06prctl: fix system call wrapperBaruch Siach
The argument names used in the prctl wrapper collide with the internal variable names in syscall wrapper macros on some architecture. This currently breaks xtensa. grep for '\b_a[0-9]' indicates that metag and microblaze might also be affected. Prefix argument names with '_prctl' to avoid collision. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 17:07:01 +0000