Age | Commit message (Collapse) | Author |
|
The INLINE_SYSCALL, INTERNAL_SYSCALL*, and internal_syscall* macros
are defined for MIPS in both libc/sysdeps/linux/mips/sysdep.h and
libc/sysdeps/linux/mips/bits/syscalls.h. The macros are the same
in both cases except that syscalls.h defines internal_syscalls[567]
the same for N32 and N64 ABIs and has a different definition for O32.
I believe that is correct. The sysdep.h header uses the O32 versions
for N32 and has different definitions for N64. I think that is wrong
and that N32 and N64 should share the same definition (modulo the
type 'long' vs. 'long long' for the arguments. This setup (from
sysdep.h) now agrees with what glibc has.
I am not positive about which header (sysdep.h vs syscalls.h) is
really the right one to have these definitions in but using sysdep.h
seems to work for all my builds.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The special sync_file_range handling is only needed for the O32 ABI
(regardless of whether it is on mips32 or mips64). The N32 (and N64)
ABI's should both use the standard code. This routine was using the
special code for the N32 ABI because that ABI has a word size of 32 bits
and that is wrong. This patch fixes it by checking the ABI used instead
of checking the word size.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
cderrno is dead code, comment it out.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When booting a Linux system with qemu-system-mips64 the execution
of $(pwd) in the ash shell triggers a segmentation fault. Ash uses
setjmp/longjmp for exception handling.
After looking at the glibc implementation,
I found some differences, with this patch tries to resolve.
Now the system boots up fine and no segmentation faults occur.
The global pointer should be restored and the types for the
register values should be wide enough.
See:
http://www.cygwin.com/ml/libc-alpha/2003-03/msg00363.html
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This patch uses 'attribute_unused' to clean up a number of warnings
messages that are generated when doing a MIPS build. All of the
changes are in MIPS specific files and there are no code changes
other then adding the unused attribute where needed.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The MIPS build is failing when UCLIBC_HAS_LFS is set to "n"
because posix_fadvise64.c is included in the build when it
should not be.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
As reported by Kristof Provost.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The clone based version was introduced by commit
58570fc8e1fd601f15be5758ab95013d56771804
vfork: Use clone if arch does not have the vfork syscall
but the code was made unreachable by the previous commit
0a043c30ee71245dfe7c9d82d654312c5e1f6127
vfork: make all archs consistent
that adds a guard which require either __NR_vfork or __NR_fork
to be set.
Neither will be set on an arch that would need to use the
clone based version.
The double declaration of vfork was also introduced by
the merge of the two above mentioned patches.
The missing ; was present in the original patch.
CC: Markos Chandras <markos.chandras@imgtec.com>
CC: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
CC: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
fork() is broken for MIPS64 N64 ABI. You can check it with a simple
C program statically linked with qemu-mips64 user emulation.
Internally fork() is using the clone system call (at least with NPTL)
with 5 arguments. See ./libpthread/nptl/sysdeps/unix/sysv/linux/i386/fork.c.
The calling conventions for MIPS N32 and N64 allow to use up to 8 registers
for that. See http://en.wikipedia.org/wiki/Calling_convention#MIPS
This is correctly implemented in libc/sysdeps/linux/mips/bits/syscalls.h,
but not in libc/sysdeps/linux/mips/sysdep.h. fork.c uses the later one.
It seems that fork() works fine for MIPS64 N32 with just using the stack like
with the O32 case. There is a user of INLINE_SYSCALL with 7 arguments in
libc/sysdeps/linux/common/sync_file_range.c for MIPS64 N32, so I decided to
only use the macros for the MIPS64 N64 case. With this patch my uClibc based
Linux system boots up fine in qemu-system-mips64.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
We were ending up with an unrecognised CPP token (which is not diagnosed
for assembler-with-cpp, 59805)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fixes gen_lowlevelrobustlock on thumb2
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Use the generic runtime pagesize as per
ce54b92b046b65464e2d16b3842f3e97e3e0f27e
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
crt1.S -> include sysdep.h -> include sysnum.h
In multistage gcc build, Buildroot happens to build crt1.S before
sysnum.h is generated. So break the above include chain and opencode the
ENTRY/END macros.
Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
It now generated a file name defconfig in current directory
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Adds support for architecture independent actions.
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Commit ee84b8b400 (linux: posix_fadvise: use new SYSCALL_ALIGN_64BIT)
removed posix_fadvise implementation for xtensa, since xtensa does not
define __NR_fadvise64. Reuse the ARM support code to restore xtensa support.
This commit is based Mike Frysinger's suggested patch.
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Make __SIGEV_PAD_SIZE to take __WORDSIZE into account for alpha, mips
and ia64 arches.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Add "__pid_t _tid" member which is used for some packages, like rt-test
for instance, which fails with an error like this one:
src/cyclictest/cyclictest.c:638:9: error: 'union <anonymous>' has no
member named '_tid'
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
sync up to 1542ea42da59018860a987f34f065cd120982e8c
(2.10 + cleaner exit status handling)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
amend to fixup line-numbering in the unifdefile
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
attempt to fix unifdef swallowing -f defundefile lines
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Use spaces instead of tabs in the table to accomodate different tab
settings.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
In a multi-threaded application where res_init() was called either
directly or implicitly, getaddrinfo() and others failed to add the
DNS search domain to hostnames.
This problem made it not possible to look up a hostname without its
domain appended.
The problem is caused by res_sync_func() overwriting the configuration
read by __open_nameservers() immediately after it is read.
The suggested solutin is to disable res_sync_func() while reading name
server configuration in res_init().
Signed-off-by: Kenneth Soerensen <kenneth.sorensen@spectralink.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Not all architectures use 'ret' as function return instruction. For example,
xtensa usually uses 'retw'. Use the ret_ERRVAL arch dependant macro instead.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
* Add a common ret_ERRVAL definition
* Remove ret_ERRVAL from architectures using the common 'ret'
* Add 'undef' to architectures that need a different return instruction
* Add '#include <common/sysdep.h>' to cris and ia64 that were missing it
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
For this port, I would like to give due credit to:
- Folks from Codito technologies (Sameer, Amit, Kanika, Ramana,...)
who did the very first port
- ARC UK from 2007-2009 (Joern, Irfan, Khurram, Phil...
- Late Brendan Kehoe (may he RIP)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Joern Rennecke <joern.rennecke@embecosm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When accessing errno, a per thread variable, from _stdio_init
a SIGBUS error happens. This change fixes the wrong relocation
and debug output.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
sync up to 55501a61dd257e941d53f175350ee52fc6ff2866
(2.9 + refactor keyword and symbol matching)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
We run the linker through the compiler-driver, so we have to check
linker flags through the driver, too.
Otherwise we might check $LD's flags while we will run $CC's linker
and those might be different beasts.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
res_init() was not atomic, which could give undesired behaviour. Now
res_init() is completely locked under one lock and the locking is
removed from __res_vinit().
Signed-off-by: Kenneth Soerensen <kenneth.sorensen@spectralink.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Commit aab4df0fb51660300559f5f29290709db2f7bfee says that the line with
after res_init() function. Commit
7f74de5d4d6d10baafab4b37bb3d472f5c5f0e8c moves the res_init()
function below the line with #undef _res.
This commit moves res_init() back above #undef _res.
Signed-off-by: Kenneth Soerensen <kenneth.sorensen@spectralink.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|