diff options
Diffstat (limited to 'libpthread/nptl/sysdeps/generic')
| -rw-r--r-- | libpthread/nptl/sysdeps/generic/Makefile | 13 | ||||
| -rw-r--r-- | libpthread/nptl/sysdeps/generic/Makefile.in | 30 | ||||
| -rw-r--r-- | libpthread/nptl/sysdeps/generic/dl-tls.c | 895 | ||||
| -rw-r--r-- | libpthread/nptl/sysdeps/generic/dl-tls.h | 2 | ||||
| -rw-r--r-- | libpthread/nptl/sysdeps/generic/libc-tls.c | 265 | ||||
| -rw-r--r-- | libpthread/nptl/sysdeps/generic/lowlevellock.h | 89 | ||||
| -rw-r--r-- | libpthread/nptl/sysdeps/generic/sysdep.h | 137 |
7 files changed, 1431 insertions, 0 deletions
diff --git a/libpthread/nptl/sysdeps/generic/Makefile b/libpthread/nptl/sysdeps/generic/Makefile new file mode 100644 index 000000000..582661fde --- /dev/null +++ b/libpthread/nptl/sysdeps/generic/Makefile @@ -0,0 +1,13 @@ +# Makefile for uClibc NPTL +# +# Copyright (C) 2006 Steven J. Hill <sjhill@uclibc.org> +# +# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. +# + +top_srcdir=../../../../ +top_builddir=../../../../ +all: objs +include $(top_builddir)Rules.mak +include Makefile.in +include $(top_srcdir)Makerules diff --git a/libpthread/nptl/sysdeps/generic/Makefile.in b/libpthread/nptl/sysdeps/generic/Makefile.in new file mode 100644 index 000000000..1079a5fd9 --- /dev/null +++ b/libpthread/nptl/sysdeps/generic/Makefile.in @@ -0,0 +1,30 @@ +# Makefile for uClibc NPTL +# +# Copyright (C) 2006 Steven J. Hill <sjhill@uclibc.org> +# +# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. +# + +# +# NOTE: Alpha and MIPS have their own versions of 'libc-tls.c' in +# their architecture specific directory which will override +# the one here. +# +libc_a_CSRC = dl-tls.c libc-tls.c + + +CFLAGS-generic = $(SSP_ALL_CFLAGS) +#CFLAGS:=$(CFLAGS:-O1=-O2) + +PTHREAD_GENERIC_OUT:=$(top_builddir)libpthread/nptl/sysdeps/generic + +LIBC_GENERIC_OBJ:=$(patsubst %.c,$(PTHREAD_GENERIC_OUT)/%.o,$(libc_a_CSRC)) + +libc-static-y+=$(LIBC_GENERIC_OBJ) + +libc-nomulti-y+=$(LIBC_GENERIC_OBJ) + +objclean-y+=nptl_pthread_generic_clean + +nptl_pthread_generic_clean: + $(do_rm) $(addprefix $(PTHREAD_GENERIC_OUT)/*., o os oS) diff --git a/libpthread/nptl/sysdeps/generic/dl-tls.c b/libpthread/nptl/sysdeps/generic/dl-tls.c new file mode 100644 index 000000000..3ac73d151 --- /dev/null +++ b/libpthread/nptl/sysdeps/generic/dl-tls.c @@ -0,0 +1,895 @@ +/* Thread-local storage handling in the ELF dynamic linker. Generic version. + Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include <libintl.h> +#include <signal.h> +#include <stdlib.h> +#include <sys/param.h> +#include <tls.h> +#include <dl-tls.h> +#include <ldsodefs.h> +#include <dl-elf.h> +#include <dl-hash.h> + +#include <assert.h> +#include <link.h> +#include <string.h> +#include <unistd.h> +#include <stdio.h> + +#define _dl_malloc malloc +#define _dl_memset memset +#define _dl_mempcpy mempcpy +#define _dl_dprintf fprintf +#define _dl_debug_file stderr +#define _dl_exit exit + +/* Amount of excess space to allocate in the static TLS area + to allow dynamic loading of modules defining IE-model TLS data. */ +# define TLS_STATIC_SURPLUS 64 + DL_NNS * 100 + +/* Value used for dtv entries for which the allocation is delayed. */ +# define TLS_DTV_UNALLOCATED ((void *) -1l) + + +/* Out-of-memory handler. */ +# ifdef SHARED +static void +__attribute__ ((__noreturn__)) +oom (void) +{ + do { + _dl_dprintf (_dl_debug_file, + "cannot allocate thread-local memory: ABORT\n"); + _dl_exit (127); + } while (1); +} +# endif + + +void *_dl_memalign(size_t alignment, size_t bytes) +{ + return _dl_malloc(bytes); +} + + +/* + * We are trying to perform a static TLS relocation in MAP, but it was + * dynamically loaded. This can only work if there is enough surplus in + * the static TLS area already allocated for each running thread. If this + * object's TLS segment is too big to fit, we fail. If it fits, + * we set MAP->l_tls_offset and return. + * This function intentionally does not return any value but signals error + * directly, as static TLS should be rare and code handling it should + * not be inlined as much as possible. + */ + + +void +internal_function __attribute_noinline__ +_dl_allocate_static_tls (struct link_map *map) +{ + /* If the alignment requirements are too high fail. */ + if (map->l_tls_align > _dl_tls_static_align) + { +fail: + _dl_dprintf(_dl_debug_file, "cannot allocate memory in static TLS block"); + _dl_exit(30); + } + +# if defined(TLS_TCB_AT_TP) + size_t freebytes; + size_t n; + size_t blsize; + + freebytes = _dl_tls_static_size - _dl_tls_static_used - TLS_TCB_SIZE; + + blsize = map->l_tls_blocksize + map->l_tls_firstbyte_offset; + if (freebytes < blsize) + goto fail; + + n = (freebytes - blsize) / map->l_tls_align; + + size_t offset = _dl_tls_static_used + (freebytes - n * map->l_tls_align + - map->l_tls_firstbyte_offset); + + map->l_tls_offset = _dl_tls_static_used = offset; +# elif defined(TLS_DTV_AT_TP) + size_t used; + size_t check; + + size_t offset = roundup (_dl_tls_static_used, map->l_tls_align); + used = offset + map->l_tls_blocksize; + check = used; + + /* dl_tls_static_used includes the TCB at the beginning. */ + if (check > _dl_tls_static_size) + goto fail; + + map->l_tls_offset = offset; + _dl_tls_static_used = used; +# else +# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined" +# endif + + /* + * If the object is not yet relocated we cannot initialize the + * static TLS region. Delay it. + */ + if (((struct elf_resolve *) map)->init_flag & RELOCS_DONE) + { +#ifdef SHARED + /* + * Update the slot information data for at least the generation of + * the DSO we are allocating data for. + */ + if (__builtin_expect (THREAD_DTV()[0].counter != _dl_tls_generation, 0)) + (void) _dl_update_slotinfo (map->l_tls_modid); +#endif + _dl_init_static_tls (map); + } + else + map->l_need_tls_init = 1; +} + +size_t +internal_function +_dl_next_tls_modid (void) +{ + size_t result; + + if (__builtin_expect (GL(dl_tls_dtv_gaps), false)) + { + size_t disp = 0; + struct dtv_slotinfo_list *runp = GL(dl_tls_dtv_slotinfo_list); + + /* Note that this branch will never be executed during program + start since there are no gaps at that time. Therefore it + does not matter that the dl_tls_dtv_slotinfo is not allocated + yet when the function is called for the first times. + + NB: the offset +1 is due to the fact that DTV[0] is used + for something else. */ + result = GL(dl_tls_static_nelem) + 1; + if (result <= GL(dl_tls_max_dtv_idx)) + do + { + while (result - disp < runp->len) + { + if (runp->slotinfo[result - disp].map == NULL) + break; + + ++result; + assert (result <= GL(dl_tls_max_dtv_idx) + 1); + } + + if (result - disp < runp->len) + break; + + disp += runp->len; + } + while ((runp = runp->next) != NULL); + + if (result > GL(dl_tls_max_dtv_idx)) + { + /* The new index must indeed be exactly one higher than the + previous high. */ + assert (result == GL(dl_tls_max_dtv_idx) + 1); + /* There is no gap anymore. */ + GL(dl_tls_dtv_gaps) = false; + + goto nogaps; + } + } + else + { + /* No gaps, allocate a new entry. */ + nogaps: + + result = ++GL(dl_tls_max_dtv_idx); + } + + return result; +} + + +# ifdef SHARED +void +internal_function +_dl_determine_tlsoffset (void) +{ + size_t max_align = TLS_TCB_ALIGN; + size_t freetop = 0; + size_t freebottom = 0; + + /* The first element of the dtv slot info list is allocated. */ + assert (GL(dl_tls_dtv_slotinfo_list) != NULL); + /* There is at this point only one element in the + dl_tls_dtv_slotinfo_list list. */ + assert (GL(dl_tls_dtv_slotinfo_list)->next == NULL); + + struct dtv_slotinfo *slotinfo = GL(dl_tls_dtv_slotinfo_list)->slotinfo; + + /* Determining the offset of the various parts of the static TLS + block has several dependencies. In addition we have to work + around bugs in some toolchains. + + Each TLS block from the objects available at link time has a size + and an alignment requirement. The GNU ld computes the alignment + requirements for the data at the positions *in the file*, though. + I.e, it is not simply possible to allocate a block with the size + of the TLS program header entry. The data is layed out assuming + that the first byte of the TLS block fulfills + + p_vaddr mod p_align == &TLS_BLOCK mod p_align + + This means we have to add artificial padding at the beginning of + the TLS block. These bytes are never used for the TLS data in + this module but the first byte allocated must be aligned + according to mod p_align == 0 so that the first byte of the TLS + block is aligned according to p_vaddr mod p_align. This is ugly + and the linker can help by computing the offsets in the TLS block + assuming the first byte of the TLS block is aligned according to + p_align. + + The extra space which might be allocated before the first byte of + the TLS block need not go unused. The code below tries to use + that memory for the next TLS block. This can work if the total + memory requirement for the next TLS block is smaller than the + gap. */ + +# if defined(TLS_TCB_AT_TP) + /* We simply start with zero. */ + size_t offset = 0; + + for (size_t cnt = 0; slotinfo[cnt].map != NULL; ++cnt) + { + assert (cnt < GL(dl_tls_dtv_slotinfo_list)->len); + + size_t firstbyte = (-slotinfo[cnt].map->l_tls_firstbyte_offset + & (slotinfo[cnt].map->l_tls_align - 1)); + size_t off; + max_align = MAX (max_align, slotinfo[cnt].map->l_tls_align); + + if (freebottom - freetop >= slotinfo[cnt].map->l_tls_blocksize) + { + off = roundup (freetop + slotinfo[cnt].map->l_tls_blocksize + - firstbyte, slotinfo[cnt].map->l_tls_align) + + firstbyte; + if (off <= freebottom) + { + freetop = off; + + /* XXX For some architectures we perhaps should store the + negative offset. */ + slotinfo[cnt].map->l_tls_offset = off; + continue; + } + } + + off = roundup (offset + slotinfo[cnt].map->l_tls_blocksize - firstbyte, + slotinfo[cnt].map->l_tls_align) + firstbyte; + if (off > offset + slotinfo[cnt].map->l_tls_blocksize + + (freebottom - freetop)) + { + freetop = offset; + freebottom = off - slotinfo[cnt].map->l_tls_blocksize; + } + offset = off; + + /* XXX For some architectures we perhaps should store the + negative offset. */ + slotinfo[cnt].map->l_tls_offset = off; + } + + GL(dl_tls_static_used) = offset; + GL(dl_tls_static_size) = (roundup (offset + TLS_STATIC_SURPLUS, max_align) + + TLS_TCB_SIZE); +# elif defined(TLS_DTV_AT_TP) + /* The TLS blocks start right after the TCB. */ + size_t offset = TLS_TCB_SIZE; + size_t cnt; + + for (cnt = 0; slotinfo[cnt].map != NULL; ++cnt) + { + assert (cnt < GL(dl_tls_dtv_slotinfo_list)->len); + + size_t firstbyte = (-slotinfo[cnt].map->l_tls_firstbyte_offset + & (slotinfo[cnt].map->l_tls_align - 1)); + size_t off; + max_align = MAX (max_align, slotinfo[cnt].map->l_tls_align); + + if (slotinfo[cnt].map->l_tls_blocksize <= freetop - freebottom) + { + off = roundup (freebottom, slotinfo[cnt].map->l_tls_align); + if (off - freebottom < firstbyte) + off += slotinfo[cnt].map->l_tls_align; + if (off + slotinfo[cnt].map->l_tls_blocksize - firstbyte <= freetop) + { + slotinfo[cnt].map->l_tls_offset = off - firstbyte; + freebottom = (off + slotinfo[cnt].map->l_tls_blocksize + - firstbyte); + continue; + } + } + + off = roundup (offset, slotinfo[cnt].map->l_tls_align); + if (off - offset < firstbyte) + off += slotinfo[cnt].map->l_tls_align; + + slotinfo[cnt].map->l_tls_offset = off - firstbyte; + if (off - firstbyte - offset > freetop - freebottom) + { + freebottom = offset; + freetop = off - firstbyte; + } + + offset = off + slotinfo[cnt].map->l_tls_blocksize - firstbyte; + } + + GL(dl_tls_static_used) = offset; + GL(dl_tls_static_size) = roundup (offset + TLS_STATIC_SURPLUS, + TLS_TCB_ALIGN); +# else +# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined" +# endif + + /* The alignment requirement for the static TLS block. */ + GL(dl_tls_static_align) = max_align; +} + + +/* This is called only when the data structure setup was skipped at startup, + when there was no need for it then. Now we have dynamically loaded + something needing TLS, or libpthread needs it. */ +int +internal_function +_dl_tls_setup (void) +{ + assert (GL(dl_tls_dtv_slotinfo_list) == NULL); + assert (GL(dl_tls_max_dtv_idx) == 0); + + const size_t nelem = 2 + TLS_SLOTINFO_SURPLUS; + + GL(dl_tls_dtv_slotinfo_list) + = calloc (1, (sizeof (struct dtv_slotinfo_list) + + nelem * sizeof (struct dtv_slotinfo))); + if (GL(dl_tls_dtv_slotinfo_list) == NULL) + return -1; + + GL(dl_tls_dtv_slotinfo_list)->len = nelem; + + /* Number of elements in the static TLS block. It can't be zero + because of various assumptions. The one element is null. */ + GL(dl_tls_static_nelem) = GL(dl_tls_max_dtv_idx) = 1; + + /* This initializes more variables for us. */ + _dl_determine_tlsoffset (); + + return 0; +} +# endif + +static void * +internal_function +allocate_dtv (void *result) +{ + dtv_t *dtv; + size_t dtv_length; + + /* We allocate a few more elements in the dtv than are needed for the + initial set of modules. This should avoid in most cases expansions + of the dtv. */ + dtv_length = GL(dl_tls_max_dtv_idx) + DTV_SURPLUS; + dtv = calloc (dtv_length + 2, sizeof (dtv_t)); + if (dtv != NULL) + { + /* This is the initial length of the dtv. */ + dtv[0].counter = dtv_length; + + /* The rest of the dtv (including the generation counter) is + Initialize with zero to indicate nothing there. */ + + /* Add the dtv to the thread data structures. */ + INSTALL_DTV (result, dtv); + } + else + result = NULL; + + return result; +} + + +/* Get size and alignment requirements of the static TLS block. */ +void +internal_function +_dl_get_tls_static_info (size_t *sizep, size_t *alignp) +{ + *sizep = GL(dl_tls_static_size); + *alignp = GL(dl_tls_static_align); +} + + +void * +internal_function +_dl_allocate_tls_storage (void) +{ + void *result; + size_t size = GL(dl_tls_static_size); + +# if defined(TLS_DTV_AT_TP) + /* Memory layout is: + [ TLS_PRE_TCB_SIZE ] [ TLS_TCB_SIZE ] [ TLS blocks ] + ^ This should be returned. */ + size += (TLS_PRE_TCB_SIZE + GL(dl_tls_static_align) - 1) + & ~(GL(dl_tls_static_align) - 1); +# endif + + /* Allocate a correctly aligned chunk of memory. */ + result = _dl_memalign (GL(dl_tls_static_align), size); + if (__builtin_expect (result != NULL, 1)) + { + /* Allocate the DTV. */ + void *allocated = result; + +# if defined(TLS_TCB_AT_TP) + /* The TCB follows the TLS blocks. */ + result = (char *) result + size - TLS_TCB_SIZE; + + /* Clear the TCB data structure. We can't ask the caller (i.e. + libpthread) to do it, because we will initialize the DTV et al. */ + _dl_memset (result, '\0', TLS_TCB_SIZE); +# elif defined(TLS_DTV_AT_TP) + result = (char *) result + size - GL(dl_tls_static_size); + + /* Clear the TCB data structure and TLS_PRE_TCB_SIZE bytes before it. + We can't ask the caller (i.e. libpthread) to do it, because we will + initialize the DTV et al. */ + _dl_memset ((char *) result - TLS_PRE_TCB_SIZE, '\0', + TLS_PRE_TCB_SIZE + TLS_TCB_SIZE); +# endif + + result = allocate_dtv (result); + if (result == NULL) + free (allocated); + } + + return result; +} + + +void * +internal_function +_dl_allocate_tls_init (void *result) +{ + if (result == NULL) + /* The memory allocation failed. */ + return NULL; + + dtv_t *dtv = GET_DTV (result); + struct dtv_slotinfo_list *listp; + size_t total = 0; + size_t maxgen = 0; + + /* We have to prepare the dtv for all currently loaded modules using + TLS. For those which are dynamically loaded we add the values + indicating deferred allocation. */ + listp = GL(dl_tls_dtv_slotinfo_list); + while (1) + { + size_t cnt; + + for (cnt = total == 0 ? 1 : 0; cnt < listp->len; ++cnt) + { + struct link_map *map; + void *dest; + + /* Check for the total number of used slots. */ + if (total + cnt > GL(dl_tls_max_dtv_idx)) + break; + + map = listp->slotinfo[cnt].map; + if (map == NULL) + /* Unused entry. */ + continue; + + /* Keep track of the maximum generation number. This might + not be the generation counter. */ + maxgen = MAX (maxgen, listp->slotinfo[cnt].gen); + + if (map->l_tls_offset == NO_TLS_OFFSET) + { + /* For dynamically loaded modules we simply store + the value indicating deferred allocation. */ + dtv[map->l_tls_modid].pointer.val = TLS_DTV_UNALLOCATED; + dtv[map->l_tls_modid].pointer.is_static = false; + continue; + } + + assert (map->l_tls_modid == cnt); + assert (map->l_tls_blocksize >= map->l_tls_initimage_size); +# if defined(TLS_TCB_AT_TP) + assert ((size_t) map->l_tls_offset >= map->l_tls_blocksize); + dest = (char *) result - map->l_tls_offset; +# elif defined(TLS_DTV_AT_TP) + dest = (char *) result + map->l_tls_offset; +# else +# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined" +# endif + + /* Copy the initialization image and clear the BSS part. */ + dtv[map->l_tls_modid].pointer.val = dest; + dtv[map->l_tls_modid].pointer.is_static = true; + _dl_memset (_dl_mempcpy (dest, map->l_tls_initimage, + map->l_tls_initimage_size), '\0', + map->l_tls_blocksize - map->l_tls_initimage_size); + } + + total += cnt; + if (total >= GL(dl_tls_max_dtv_idx)) + break; + + listp = listp->next; + assert (listp != NULL); + } + + /* The DTV version is up-to-date now. */ + dtv[0].counter = maxgen; + + return result; +} + +void * +internal_function +_dl_allocate_tls (void *mem) +{ + return _dl_allocate_tls_init (mem == NULL + ? _dl_allocate_tls_storage () + : allocate_dtv (mem)); +} + + +void +internal_function +_dl_deallocate_tls (void *tcb, bool dealloc_tcb) +{ + dtv_t *dtv = GET_DTV (tcb); + size_t cnt; + + /* We need to free the memory allocated for non-static TLS. */ + for (cnt = 0; cnt < dtv[-1].counter; ++cnt) + if (! dtv[1 + cnt].pointer.is_static + && dtv[1 + cnt].pointer.val != TLS_DTV_UNALLOCATED) + free (dtv[1 + cnt].pointer.val); + + /* The array starts with dtv[-1]. */ +#ifdef SHARED + if (dtv != GL(dl_initial_dtv)) +#endif + free (dtv - 1); + + if (dealloc_tcb) + { +# if defined(TLS_TCB_AT_TP) + /* The TCB follows the TLS blocks. Back up to free the whole block. */ + tcb -= GL(dl_tls_static_size) - TLS_TCB_SIZE; +# elif defined(TLS_DTV_AT_TP) + /* Back up the TLS_PRE_TCB_SIZE bytes. */ + tcb -= (TLS_PRE_TCB_SIZE + GL(dl_tls_static_align) - 1) + & ~(GL(dl_tls_static_align) - 1); +# endif + free (tcb); + } +} + + +# ifdef SHARED +/* The __tls_get_addr function has two basic forms which differ in the + arguments. The IA-64 form takes two parameters, the module ID and + offset. The form used, among others, on IA-32 takes a reference to + a special structure which contain the same information. The second + form seems to be more often used (in the moment) so we default to + it. Users of the IA-64 form have to provide adequate definitions + of the following macros. */ +# ifndef GET_ADDR_ARGS +# define GET_ADDR_ARGS tls_index *ti +# endif +# ifndef GET_ADDR_MODULE +# define GET_ADDR_MODULE ti->ti_module +# endif +# ifndef GET_ADDR_OFFSET +# define GET_ADDR_OFFSET ti->ti_offset +# endif + + +static void * +allocate_and_init (struct link_map *map) +{ + void *newp; + + newp = _dl_memalign (map->l_tls_align, map->l_tls_blocksize); + if (newp == NULL) + oom (); + + /* Initialize the memory. */ + _dl_memset (_dl_mempcpy (newp, map->l_tls_initimage, map->l_tls_initimage_size), + '\0', map->l_tls_blocksize - map->l_tls_initimage_size); + + return newp; +} + + +struct link_map * +_dl_update_slotinfo (unsigned long int req_modid) +{ + struct link_map *the_map = NULL; + dtv_t *dtv = THREAD_DTV (); + + /* The global dl_tls_dtv_slotinfo array contains for each module + index the generation counter current when the entry was created. + This array never shrinks so that all module indices which were + valid at some time can be used to access it. Before the first + use of a new module index in this function the array was extended + appropriately. Access also does not have to be guarded against + modifications of the array. It is assumed that pointer-size + values can be read atomically even in SMP environments. It is + possible that other threads at the same time dynamically load + code and therefore add to the slotinfo list. This is a problem + since we must not pick up any information about incomplete work. + The solution to this is to ignore all dtv slots which were + created after the one we are currently interested. We know that + dynamic loading for this module is completed and this is the last + load operation we know finished. */ + unsigned long int idx = req_modid; + struct dtv_slotinfo_list *listp = GL(dl_tls_dtv_slotinfo_list); + + while (idx >= listp->len) + { + idx -= listp->len; + listp = listp->next; + } + + if (dtv[0].counter < listp->slotinfo[idx].gen) + { + /* The generation counter for the slot is higher than what the + current dtv implements. We have to update the whole dtv but + only those entries with a generation counter <= the one for + the entry we need. */ + size_t new_gen = listp->slotinfo[idx].gen; + size_t total = 0; + + /* We have to look through the entire dtv slotinfo list. */ + listp = GL(dl_tls_dtv_slotinfo_list); + do + { + size_t cnt; + + for (cnt = total == 0 ? 1 : 0; cnt < listp->len; ++cnt) + { + size_t gen = listp->slotinfo[cnt].gen; + + if (gen > new_gen) + /* This is a slot for a generation younger than the + one we are handling now. It might be incompletely + set up so ignore it. */ + continue; + + /* If the entry is older than the current dtv layout we + know we don't have to handle it. */ + if (gen <= dtv[0].counter) + continue; + + /* If there is no map this means the entry is empty. */ + struct link_map *map = listp->slotinfo[cnt].map; + if (map == NULL) + { + /* If this modid was used at some point the memory + might still be allocated. */ + if (! dtv[total + cnt].pointer.is_static + && dtv[total + cnt].pointer.val != TLS_DTV_UNALLOCATED) + { + free (dtv[total + cnt].pointer.val); + dtv[total + cnt].pointer.val = TLS_DTV_UNALLOCATED; + } + + continue; + } + + /* Check whether the current dtv array is large enough. */ + size_t modid = map->l_tls_modid; + assert (total + cnt == modid); + if (dtv[-1].counter < modid) + { + /* Reallocate the dtv. */ + dtv_t *newp; + size_t newsize = GL(dl_tls_max_dtv_idx) + DTV_SURPLUS; + size_t oldsize = dtv[-1].counter; + + assert (map->l_tls_modid <= newsize); + + if (dtv == GL(dl_initial_dtv)) + { + /* This is the initial dtv that was allocated + during rtld startup using the dl-minimal.c + malloc instead of the real malloc. We can't + free it, we have to abandon the old storage. */ + + newp = malloc ((2 + newsize) * sizeof (dtv_t)); + if (newp == NULL) + oom (); + _dl_memcpy (newp, &dtv[-1], oldsize * sizeof (dtv_t)); + } + else + { + newp = realloc (&dtv[-1], + (2 + newsize) * sizeof (dtv_t)); + if (newp == NULL) + oom (); + } + + newp[0].counter = newsize; + + /* Clear the newly allocated part. */ + _dl_memset (newp + 2 + oldsize, '\0', + (newsize - oldsize) * sizeof (dtv_t)); + + /* Point dtv to the generation counter. */ + dtv = &newp[1]; + + /* Install this new dtv in the thread data + structures. */ + INSTALL_NEW_DTV (dtv); + } + + /* If there is currently memory allocate for this + dtv entry free it. */ + /* XXX Ideally we will at some point create a memory + pool. */ + if (! dtv[modid].pointer.is_static + && dtv[modid].pointer.val != TLS_DTV_UNALLOCATED) + /* Note that free is called for NULL is well. We + deallocate even if it is this dtv entry we are + supposed to load. The reason is that we call + memalign and not malloc. */ + free (dtv[modid].pointer.val); + + /* This module is loaded dynamically- We defer memory + allocation. */ + dtv[modid].pointer.is_static = false; + dtv[modid].pointer.val = TLS_DTV_UNALLOCATED; + + if (modid == req_modid) + the_map = map; + } + + total += listp->len; + } + while ((listp = listp->next) != NULL); + + /* This will be the new maximum generation counter. */ + dtv[0].counter = new_gen; + } + + return the_map; +} + + +/* The generic dynamic and local dynamic model cannot be used in + statically linked applications. */ +void * +__tls_get_addr (GET_ADDR_ARGS) +{ + dtv_t *dtv = THREAD_DTV (); + struct link_map *the_map = NULL; + void *p; + + if (__builtin_expect (dtv[0].counter != GL(dl_tls_generation), 0)) + the_map = _dl_update_slotinfo (GET_ADDR_MODULE); + + p = dtv[GET_ADDR_MODULE].pointer.val; + + if (__builtin_expect (p == TLS_DTV_UNALLOCATED, 0)) + { + /* The allocation was deferred. Do it now. */ + if (the_map == NULL) + { + /* Find the link map for this module. */ + size_t idx = GET_ADDR_MODULE; + struct dtv_slotinfo_list *listp = GL(dl_tls_dtv_slotinfo_list); + + while (idx >= listp->len) + { + idx -= listp->len; + listp = listp->next; + } + + the_map = listp->slotinfo[idx].map; + } + + p = dtv[GET_ADDR_MODULE].pointer.val = allocate_and_init (the_map); + dtv[GET_ADDR_MODULE].pointer.is_static = false; + } + + return (char *) p + GET_ADDR_OFFSET; +} +# endif + + + +void +_dl_add_to_slotinfo (struct link_map *l) +{ + /* Now that we know the object is loaded successfully add + modules containing TLS data to the dtv info table. We + might have to increase its size. */ + struct dtv_slotinfo_list *listp; + struct dtv_slotinfo_list *prevp; + size_t idx = l->l_tls_modid; + + /* Find the place in the dtv slotinfo list. */ + listp = GL(dl_tls_dtv_slotinfo_list); + prevp = NULL; /* Needed to shut up gcc. */ + do + { + /* Does it fit in the array of this list element? */ + if (idx < listp->len) + break; + idx -= listp->len; + prevp = listp; + listp = listp->next; + } + while (listp != NULL); + + if (listp == NULL) + { + /* When we come here it means we have to add a new element + to the slotinfo list. And the new module must be in + the first slot. */ + assert (idx == 0); + + listp = prevp->next = (struct dtv_slotinfo_list *) + malloc (sizeof (struct dtv_slotinfo_list) + + TLS_SLOTINFO_SURPLUS * sizeof (struct dtv_slotinfo)); + if (listp == NULL) + { + /* We ran out of memory. We will simply fail this + call but don't undo anything we did so far. The + application will crash or be terminated anyway very + soon. */ + + /* We have to do this since some entries in the dtv + slotinfo array might already point to this + generation. */ + ++GL(dl_tls_generation); + + _dl_dprintf (_dl_debug_file, + "cannot create TLS data structures: ABORT\n"); + _dl_exit (127); + } + + listp->len = TLS_SLOTINFO_SURPLUS; + listp->next = NULL; + _dl_memset (listp->slotinfo, '\0', + TLS_SLOTINFO_SURPLUS * sizeof (struct dtv_slotinfo)); + } + + /* Add the information into the slotinfo data structure. */ + listp->slotinfo[idx].map = l; + listp->slotinfo[idx].gen = GL(dl_tls_generation) + 1; +} diff --git a/libpthread/nptl/sysdeps/generic/dl-tls.h b/libpthread/nptl/sysdeps/generic/dl-tls.h new file mode 100644 index 000000000..7703a9752 --- /dev/null +++ b/libpthread/nptl/sysdeps/generic/dl-tls.h @@ -0,0 +1,2 @@ +/* There has to be an architecture specific version of this file. */ +#error "architecture-specific version of <dl-tls.h> missing" diff --git a/libpthread/nptl/sysdeps/generic/libc-tls.c b/libpthread/nptl/sysdeps/generic/libc-tls.c new file mode 100644 index 000000000..b78d96483 --- /dev/null +++ b/libpthread/nptl/sysdeps/generic/libc-tls.c @@ -0,0 +1,265 @@ +/* Initialization code for TLS in statically linked application. + Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include <errno.h> +#include <ldsodefs.h> +#include <tls.h> +#include <unistd.h> +#include <stdio.h> +#include <sys/param.h> +#include <elf.h> +#include <link.h> +#include <string.h> +#include <stdlib.h> + + +#ifdef SHARED + #error makefile bug, this file is for static only +#endif + +#if USE_TLS +extern ElfW(Phdr) *_dl_phdr; +extern size_t _dl_phnum; + + +static dtv_t static_dtv[2 + TLS_SLOTINFO_SURPLUS]; + + +static struct +{ + struct dtv_slotinfo_list si; + /* The dtv_slotinfo_list data structure does not include the actual + information since it is defined as an array of size zero. We define + here the necessary entries. Note that it is not important whether + there is padding or not since we will always access the information + through the 'si' element. */ + struct dtv_slotinfo info[2 + TLS_SLOTINFO_SURPLUS]; +} static_slotinfo; + +/* Fake link map for the application. */ +static struct link_map static_map; + + +/* Highest dtv index currently needed. */ +size_t _dl_tls_max_dtv_idx; +/* Flag signalling whether there are gaps in the module ID allocation. */ +bool _dl_tls_dtv_gaps; +/* Information about the dtv slots. */ +struct dtv_slotinfo_list *_dl_tls_dtv_slotinfo_list; +/* Number of modules in the static TLS block. */ +size_t _dl_tls_static_nelem; +/* Size of the static TLS block. */ +size_t _dl_tls_static_size; +/* Size actually allocated in the static TLS block. */ +size_t _dl_tls_static_used; +/* Alignment requirement of the static TLS block. */ +size_t _dl_tls_static_align; + +/* Generation counter for the dtv. */ +size_t _dl_tls_generation; + + +/* Additional definitions needed by TLS initialization. */ +#ifdef TLS_INIT_HELPER +TLS_INIT_HELPER +#endif + +static inline void +init_slotinfo (void) +{ + /* Create the slotinfo list. */ + static_slotinfo.si.len = (((char *) (&static_slotinfo + 1) + - (char *) &static_slotinfo.si.slotinfo[0]) + / sizeof static_slotinfo.si.slotinfo[0]); + // static_slotinfo.si.next = NULL; already zero + + /* The slotinfo list. Will be extended by the code doing dynamic + linking. */ + GL(dl_tls_max_dtv_idx) = 1; + GL(dl_tls_dtv_slotinfo_list) = &static_slotinfo.si; +} + +static inline void +init_static_tls (size_t memsz, size_t align) +{ + /* That is the size of the TLS memory for this object. The initialized + value of _dl_tls_static_size is provided by dl-open.c to request some + surplus that permits dynamic loading of modules with IE-model TLS. */ + GL(dl_tls_static_size) = roundup (memsz + GL(dl_tls_static_size), + TLS_TCB_ALIGN); + GL(dl_tls_static_used) = memsz; + /* The alignment requirement for the static TLS block. */ + GL(dl_tls_static_align) = align; + /* Number of elements in the static TLS block. */ + GL(dl_tls_static_nelem) = GL(dl_tls_max_dtv_idx); +} + +void +__libc_setup_tls (size_t tcbsize, size_t tcbalign) +{ + void *tlsblock; + size_t memsz = 0; + size_t filesz = 0; + void *initimage = NULL; + size_t align = 0; + size_t max_align = tcbalign; + size_t tcb_offset; + ElfW(Phdr) *phdr; + + /* Look through the TLS segment if there is any. */ + if (_dl_phdr != NULL) + for (phdr = _dl_phdr; phdr < &_dl_phdr[_dl_phnum]; ++phdr) + if (phdr->p_type == PT_TLS) + { + /* Remember the values we need. */ + memsz = phdr->p_memsz; + filesz = phdr->p_filesz; + initimage = (void *) phdr->p_vaddr; + align = phdr->p_align; + if (phdr->p_align > max_align) + max_align = phdr->p_align; + break; + } + + /* We have to set up the TCB block which also (possibly) contains + 'errno'. Therefore we avoid 'malloc' which might touch 'errno'. + Instead we use 'sbrk' which would only uses 'errno' if it fails. + In this case we are right away out of memory and the user gets + what she/he deserves. + + The initialized value of _dl_tls_static_size is provided by dl-open.c + to request some surplus that permits dynamic loading of modules with + IE-model TLS. */ +# if defined(TLS_TCB_AT_TP) + tcb_offset = roundup (memsz + GL(dl_tls_static_size), tcbalign); + tlsblock = sbrk (tcb_offset + tcbsize + max_align); +# elif defined(TLS_DTV_AT_TP) + tcb_offset = roundup (tcbsize, align ?: 1); + tlsblock = sbrk (tcb_offset + memsz + max_align + + TLS_PRE_TCB_SIZE + GL(dl_tls_static_size)); + tlsblock += TLS_PRE_TCB_SIZE; +# else + /* In case a model with a different layout for the TCB and DTV + is defined add another #elif here and in the following #ifs. */ +# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined" +# endif + + /* Align the TLS block. */ + tlsblock = (void *) (((uintptr_t) tlsblock + max_align - 1) + & ~(max_align - 1)); + + /* Initialize the dtv. [0] is the length, [1] the generation counter. */ + static_dtv[0].counter = (sizeof (static_dtv) / sizeof (static_dtv[0])) - 2; + // static_dtv[1].counter = 0; would be needed if not already done + + /* Initialize the TLS block. */ +# if defined(TLS_TCB_AT_TP) + static_dtv[2].pointer.val = ((char *) tlsblock + tcb_offset + - roundup (memsz, align ?: 1)); + static_map.l_tls_offset = roundup (memsz, align ?: 1); +# elif defined(TLS_DTV_AT_TP) + static_dtv[2].pointer.val = (char *) tlsblock + tcb_offset; + static_map.l_tls_offset = tcb_offset; +# else +# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined" +# endif + static_dtv[2].pointer.is_static = true; + /* sbrk gives us zero'd memory, so we don't need to clear the remainder. */ + memcpy (static_dtv[2].pointer.val, initimage, filesz); + + /* Install the pointer to the dtv. */ + + /* Initialize the thread pointer. */ +# if defined(TLS_TCB_AT_TP) + INSTALL_DTV ((char *) tlsblock + tcb_offset, static_dtv); + + const char *lossage = TLS_INIT_TP ((char *) tlsblock + tcb_offset, 0); +# elif defined(TLS_DTV_AT_TP) + INSTALL_DTV (tlsblock, static_dtv); + const char *lossage = (char *)TLS_INIT_TP (tlsblock, 0); +# else +# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined" +# endif + if (__builtin_expect (lossage != NULL, 0)) + abort(); + + /* We have to create a fake link map which normally would be created + by the dynamic linker. It just has to have enough information to + make the TLS routines happy. */ + static_map.l_tls_align = align; + static_map.l_tls_blocksize = memsz; + static_map.l_tls_initimage = initimage; + static_map.l_tls_initimage_size = filesz; + static_map.l_tls_modid = 1; + + init_slotinfo (); + // static_slotinfo.si.slotinfo[1].gen = 0; already zero + static_slotinfo.si.slotinfo[1].map = &static_map; + + memsz = roundup (memsz, align ?: 1); + +# if defined(TLS_TCB_AT_TP) + memsz += tcbsize; +# elif defined(TLS_DTV_AT_TP) + memsz += tcb_offset; +# endif + + init_static_tls (memsz, MAX (TLS_TCB_ALIGN, max_align)); +} + +/* This is called only when the data structure setup was skipped at startup, + when there was no need for it then. Now we have dynamically loaded + something needing TLS, or libpthread needs it. */ +int +internal_function +_dl_tls_setup (void) +{ + init_slotinfo (); + init_static_tls ( +# if defined(TLS_TCB_AT_TP) + TLS_TCB_SIZE, +# else + 0, +# endif + TLS_TCB_ALIGN); + return 0; +} + + +/* This is the minimal initialization function used when libpthread is + not used. */ +void +__attribute__ ((weak)) +__pthread_initialize_minimal (void) +{ + __libc_setup_tls (TLS_INIT_TCB_SIZE, TLS_INIT_TCB_ALIGN); +} + +#elif defined NONTLS_INIT_TP + +/* This is the minimal initialization function used when libpthread is + not used. */ +void +__attribute__ ((weak)) +__pthread_initialize_minimal (void) +{ + NONTLS_INIT_TP; +} + +#endif diff --git a/libpthread/nptl/sysdeps/generic/lowlevellock.h b/libpthread/nptl/sysdeps/generic/lowlevellock.h new file mode 100644 index 000000000..7f95daada --- /dev/null +++ b/libpthread/nptl/sysdeps/generic/lowlevellock.h @@ -0,0 +1,89 @@ +/* Copyright (C) 2002 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Ulrich Drepper <drepper@redhat.com>, 2002. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include <atomic.h> + + +/* Implement generic mutex. Basic futex syscall support is required: + + lll_futex_wait(futex, value) - call sys_futex with FUTEX_WAIT + and third parameter VALUE + + lll_futex_wake(futex, value) - call sys_futex with FUTEX_WAKE + and third parameter VALUE +*/ + + +/* Mutex lock counter: + bit 31 clear means unlocked; + bit 31 set means locked. + + All code that looks at bit 31 first increases the 'number of + interested threads' usage counter, which is in bits 0-30. + + All negative mutex values indicate that the mutex is still locked. */ + + +static inline void +__generic_mutex_lock (int *mutex) +{ + unsigned int v; + + /* Bit 31 was clear, we got the mutex. (this is the fastpath). */ + if (atomic_bit_test_set (mutex, 31) == 0) + return; + + atomic_increment (mutex); + + while (1) + { + if (atomic_bit_test_set (mutex, 31) == 0) + { + atomic_decrement (mutex); + return; + } + + /* We have to wait now. First make sure the futex value we are + monitoring is truly negative (i.e. locked). */ + v = *mutex; + if (v >= 0) + continue; + + lll_futex_wait (mutex, v); + } +} + + +static inline void +__generic_mutex_unlock (int *mutex) +{ + /* Adding 0x80000000 to the counter results in 0 if and only if + there are not other interested threads - we can return (this is + the fastpath). */ + if (atomic_add_zero (mutex, 0x80000000)) + return; + + /* There are other threads waiting for this mutex, wake one of them + up. */ + lll_futex_wake (mutex, 1); +} + + +#define lll_mutex_lock(futex) __generic_mutex_lock (&(futex)) +#define lll_mutex_unlock(futex) __generic_mutex_unlock (&(futex)) diff --git a/libpthread/nptl/sysdeps/generic/sysdep.h b/libpthread/nptl/sysdeps/generic/sysdep.h new file mode 100644 index 000000000..9627b3e79 --- /dev/null +++ b/libpthread/nptl/sysdeps/generic/sysdep.h @@ -0,0 +1,137 @@ +/* Generic asm macros used on many machines. + Copyright (C) 1991,92,93,96,98,2002,2003 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef C_LABEL + +/* Define a macro we can use to construct the asm name for a C symbol. */ +#ifndef __UCLIBC_UNDERSCORES__ +#ifdef __STDC__ +#define C_LABEL(name) name##: +#else +#define C_LABEL(name) name/**/: +#endif +#else +#ifdef __STDC__ +#define C_LABEL(name) _##name##: +#else +#define C_LABEL(name) _/**/name/**/: +#endif +#endif + +#endif + +#ifdef __ASSEMBLER__ +/* Mark the end of function named SYM. This is used on some platforms + to generate correct debugging information. */ +#ifndef END +#define END(sym) +#endif + +#ifndef JUMPTARGET +#define JUMPTARGET(sym) sym +#endif + +/* Macros to generate eh_frame unwind information. */ +# ifdef HAVE_ASM_CFI_DIRECTIVES +# define cfi_startproc .cfi_startproc +# define cfi_endproc .cfi_endproc +# define cfi_def_cfa(reg, off) .cfi_def_cfa reg, off +# define cfi_def_cfa_register(reg) .cfi_def_cfa_register reg +# define cfi_def_cfa_offset(off) .cfi_def_cfa_offset off +# define cfi_adjust_cfa_offset(off) .cfi_adjust_cfa_offset off +# define cfi_offset(reg, off) .cfi_offset reg, off +# define cfi_rel_offset(reg, off) .cfi_rel_offset reg, off +# define cfi_register(r1, r2) .cfi_register r1, r2 +# define cfi_return_column(reg) .cfi_return_column reg +# define cfi_restore(reg) .cfi_restore reg +# define cfi_same_value(reg) .cfi_same_value reg +# define cfi_undefined(reg) .cfi_undefined reg +# define cfi_remember_state .cfi_remember_state +# define cfi_restore_state .cfi_restore_state +# define cfi_window_save .cfi_window_save +# else +# define cfi_startproc +# define cfi_endproc +# define cfi_def_cfa(reg, off) +# define cfi_def_cfa_register(reg) +# define cfi_def_cfa_offset(off) +# define cfi_adjust_cfa_offset(off) +# define cfi_offset(reg, off) +# define cfi_rel_offset(reg, off) +# define cfi_register(r1, r2) +# define cfi_return_column(reg) +# define cfi_restore(reg) +# define cfi_same_value(reg) +# define cfi_undefined(reg) +# define cfi_remember_state +# define cfi_restore_state +# define cfi_window_save +# endif + +#else /* ! ASSEMBLER */ +# ifdef HAVE_ASM_CFI_DIRECTIVES +# define CFI_STRINGIFY(Name) CFI_STRINGIFY2 (Name) +# define CFI_STRINGIFY2(Name) #Name +# define CFI_STARTPROC ".cfi_startproc" +# define CFI_ENDPROC ".cfi_endproc" +# define CFI_DEF_CFA(reg, off) \ + ".cfi_def_cfa " CFI_STRINGIFY(reg) "," CFI_STRINGIFY(off) +# define CFI_DEF_CFA_REGISTER(reg) \ + ".cfi_def_cfa_register " CFI_STRINGIFY(reg) +# define CFI_DEF_CFA_OFFSET(off) \ + ".cfi_def_cfa_offset " CFI_STRINGIFY(off) +# define CFI_ADJUST_CFA_OFFSET(off) \ + ".cfi_adjust_cfa_offset " CFI_STRINGIFY(off) +# define CFI_OFFSET(reg, off) \ + ".cfi_offset " CFI_STRINGIFY(reg) "," CFI_STRINGIFY(off) +# define CFI_REL_OFFSET(reg, off) \ + ".cfi_rel_offset " CFI_STRINGIFY(reg) "," CFI_STRINGIFY(off) +# define CFI_REGISTER(r1, r2) \ + ".cfi_register " CFI_STRINGIFY(r1) "," CFI_STRINGIFY(r2) +# define CFI_RETURN_COLUMN(reg) \ + ".cfi_return_column " CFI_STRINGIFY(reg) +# define CFI_RESTORE(reg) \ + ".cfi_restore " CFI_STRINGIFY(reg) +# define CFI_UNDEFINED(reg) \ + ".cfi_undefined " CFI_STRINGIFY(reg) +# define CFI_REMEMBER_STATE \ + ".cfi_remember_state" +# define CFI_RESTORE_STATE \ + ".cfi_restore_state" +# define CFI_WINDOW_SAVE \ + ".cfi_window_save" +# else +# define CFI_STARTPROC +# define CFI_ENDPROC +# define CFI_DEF_CFA(reg, off) +# define CFI_DEF_CFA_REGISTER(reg) +# define CFI_DEF_CFA_OFFSET(off) +# define CFI_ADJUST_CFA_OFFSET(off) +# define CFI_OFFSET(reg, off) +# define CFI_REL_OFFSET(reg, off) +# define CFI_REGISTER(r1, r2) +# define CFI_RETURN_COLUMN(reg) +# define CFI_RESTORE(reg) +# define CFI_UNDEFINED(reg) +# define CFI_REMEMBER_STATE +# define CFI_RESTORE_STATE +# define CFI_WINDOW_SAVE +# endif + +#endif /* __ASSEMBLER__ */ |