summaryrefslogtreecommitdiff
path: root/libc/sysdeps/linux/mips
diff options
context:
space:
mode:
Diffstat (limited to 'libc/sysdeps/linux/mips')
-rw-r--r--libc/sysdeps/linux/mips/bits/atomic.h90
1 files changed, 58 insertions, 32 deletions
diff --git a/libc/sysdeps/linux/mips/bits/atomic.h b/libc/sysdeps/linux/mips/bits/atomic.h
index 4f73cc261..3fab82955 100644
--- a/libc/sysdeps/linux/mips/bits/atomic.h
+++ b/libc/sysdeps/linux/mips/bits/atomic.h
@@ -49,6 +49,32 @@ typedef uintmax_t uatomic_max_t;
# define MIPS_SYNC sync
#endif
+/* Certain revisions of the R10000 Processor need an LL/SC Workaround
+ enabled. Revisions before 3.0 misbehave on atomic operations, and
+ Revs 2.6 and lower deadlock after several seconds due to other errata.
+
+ To quote the R10K Errata:
+ Workaround: The basic idea is to inhibit the four instructions
+ from simultaneously becoming active in R10000. Padding all
+ ll/sc sequences with nops or changing the looping branch in the
+ routines to a branch likely (which is always predicted taken
+ by R10000) will work. The nops should go after the loop, and the
+ number of them should be 28. This number could be decremented for
+ each additional instruction in the ll/sc loop such as the lock
+ modifier(s) between the ll and sc, the looping branch and its
+ delay slot. For typical short routines with one ll/sc loop, any
+ instructions after the loop could also count as a decrement. The
+ nop workaround pollutes the cache more but would be a few cycles
+ faster if all the code is in the cache and the looping branch
+ is predicted not taken. */
+
+
+#ifdef _MIPS_ARCH_R10000
+#define R10K_BEQZ_INSN "beqzl"
+#else
+#define R10K_BEQZ_INSN "beqz"
+#endif
+
#define MIPS_SYNC_STR_2(X) #X
#define MIPS_SYNC_STR_1(X) MIPS_SYNC_STR_2(X)
#define MIPS_SYNC_STR MIPS_SYNC_STR_1(MIPS_SYNC)
@@ -69,16 +95,16 @@ typedef uintmax_t uatomic_max_t;
MIPS_PUSH_MIPS2 \
rel "\n" \
"1:\t" \
- "ll %0,%4\n\t" \
+ "ll %0,%5\n\t" \
"move %1,$0\n\t" \
- "bne %0,%2,2f\n\t" \
- "move %1,%3\n\t" \
- "sc %1,%4\n\t" \
- "beqz %1,1b\n" \
+ "bne %0,%3,2f\n\t" \
+ "move %1,%4\n\t" \
+ "sc %1,%2\n\t" \
+ R10K_BEQZ_INSN" %1,1b\n" \
acq "\n\t" \
".set pop\n" \
"2:\n\t" \
- : "=&r" (__prev), "=&r" (__cmp) \
+ : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \
: "r" (oldval), "r" (newval), "m" (*mem) \
: "memory")
@@ -93,16 +119,16 @@ typedef uintmax_t uatomic_max_t;
MIPS_PUSH_MIPS2 \
rel "\n" \
"1:\t" \
- "lld %0,%4\n\t" \
+ "lld %0,%5\n\t" \
"move %1,$0\n\t" \
- "bne %0,%2,2f\n\t" \
- "move %1,%3\n\t" \
- "scd %1,%4\n\t" \
- "beqz %1,1b\n" \
+ "bne %0,%3,2f\n\t" \
+ "move %1,%4\n\t" \
+ "scd %1,%2\n\t" \
+ R10K_BEQZ_INSN" %1,1b\n" \
acq "\n\t" \
".set pop\n" \
"2:\n\t" \
- : "=&r" (__prev), "=&r" (__cmp) \
+ : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \
: "r" (oldval), "r" (newval), "m" (*mem) \
: "memory")
#endif
@@ -189,14 +215,14 @@ typedef uintmax_t uatomic_max_t;
MIPS_PUSH_MIPS2 \
rel "\n" \
"1:\t" \
- "ll %0,%3\n\t" \
- "move %1,%2\n\t" \
- "sc %1,%3\n\t" \
- "beqz %1,1b\n" \
+ "ll %0,%4\n\t" \
+ "move %1,%3\n\t" \
+ "sc %1,%2\n\t" \
+ R10K_BEQZ_INSN" %1,1b\n" \
acq "\n\t" \
".set pop\n" \
"2:\n\t" \
- : "=&r" (__prev), "=&r" (__cmp) \
+ : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \
: "r" (newval), "m" (*mem) \
: "memory"); \
__prev; })
@@ -213,14 +239,14 @@ typedef uintmax_t uatomic_max_t;
MIPS_PUSH_MIPS2 \
rel "\n" \
"1:\n" \
- "lld %0,%3\n\t" \
- "move %1,%2\n\t" \
- "scd %1,%3\n\t" \
- "beqz %1,1b\n" \
+ "lld %0,%4\n\t" \
+ "move %1,%3\n\t" \
+ "scd %1,%2\n\t" \
+ R10K_BEQZ_INSN" %1,1b\n" \
acq "\n\t" \
".set pop\n" \
"2:\n\t" \
- : "=&r" (__prev), "=&r" (__cmp) \
+ : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \
: "r" (newval), "m" (*mem) \
: "memory"); \
__prev; })
@@ -248,14 +274,14 @@ typedef uintmax_t uatomic_max_t;
MIPS_PUSH_MIPS2 \
rel "\n" \
"1:\t" \
- "ll %0,%3\n\t" \
- "addu %1,%0,%2\n\t" \
- "sc %1,%3\n\t" \
- "beqz %1,1b\n" \
+ "ll %0,%4\n\t" \
+ "addu %1,%0,%3\n\t" \
+ "sc %1,%2\n\t" \
+ R10K_BEQZ_INSN" %1,1b\n" \
acq "\n\t" \
".set pop\n" \
"2:\n\t" \
- : "=&r" (__prev), "=&r" (__cmp) \
+ : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \
: "r" (value), "m" (*mem) \
: "memory"); \
__prev; })
@@ -272,14 +298,14 @@ typedef uintmax_t uatomic_max_t;
MIPS_PUSH_MIPS2 \
rel "\n" \
"1:\t" \
- "lld %0,%3\n\t" \
- "daddu %1,%0,%2\n\t" \
- "scd %1,%3\n\t" \
- "beqz %1,1b\n" \
+ "lld %0,%4\n\t" \
+ "daddu %1,%0,%3\n\t" \
+ "scd %1,%2\n\t" \
+ R10K_BEQZ_INSN" %1,1b\n" \
acq "\n\t" \
".set pop\n" \
"2:\n\t" \
- : "=&r" (__prev), "=&r" (__cmp) \
+ : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem) \
: "r" (value), "m" (*mem) \
: "memory"); \
__prev; })