summaryrefslogtreecommitdiff
path: root/ldso
diff options
context:
space:
mode:
Diffstat (limited to 'ldso')
-rw-r--r--ldso/ldso/arm/elfinterp.c4
-rw-r--r--ldso/ldso/arm/resolve.S179
-rw-r--r--ldso/ldso/dl-hash.c62
3 files changed, 192 insertions, 53 deletions
diff --git a/ldso/ldso/arm/elfinterp.c b/ldso/ldso/arm/elfinterp.c
index 4ccfba769..37531126a 100644
--- a/ldso/ldso/arm/elfinterp.c
+++ b/ldso/ldso/arm/elfinterp.c
@@ -57,7 +57,7 @@ unsigned long _dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry)
rel_addr = (ELF_RELOC *) tpnt->dynamic_info[DT_JMPREL];
- this_reloc = rel_addr + (reloc_entry >> 3);
+ this_reloc = rel_addr + reloc_entry;
reloc_type = ELF32_R_TYPE(this_reloc->r_info);
symtab_index = ELF32_R_SYM(this_reloc->r_info);
@@ -85,7 +85,9 @@ unsigned long _dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry)
_dl_exit(1);
}
#if defined (__SUPPORT_LD_DEBUG__)
+#if !defined __SUPPORT_LD_DEBUG_EARLY__
if ((unsigned long) got_addr < 0x40000000)
+#endif
{
if (_dl_debug_bindings)
{
diff --git a/ldso/ldso/arm/resolve.S b/ldso/ldso/arm/resolve.S
index 9bd88419f..23e4fe528 100644
--- a/ldso/ldso/arm/resolve.S
+++ b/ldso/ldso/arm/resolve.S
@@ -1,49 +1,164 @@
/*
- * This function is _not_ called directly. It is jumped to (so no return
- * address is on the stack) when attempting to use a symbol that has not yet
- * been resolved. The first time a jump symbol (such as a function call inside
- * a shared library) is used (before it gets resolved) it will jump here to
- * _dl_linux_resolve. When we get called the stack looks like this:
- * reloc_entry
- * tpnt
- *
- * This function saves all the registers, puts a copy of reloc_entry and tpnt
- * on the stack (as function arguments) then make the function call
- * _dl_linux_resolver(tpnt, reloc_entry). _dl_linux_resolver() figures out
- * where the jump symbol is _really_ supposed to have jumped to and returns
- * that to us. Once we have that, we overwrite tpnt with this fixed up
- * address. We then clean up after ourselves, put all the registers back how we
- * found them, then we jump to the fixed up address, which is where the jump
- * symbol that got us here really wanted to jump to in the first place.
- * -Erik Andersen
+ *
+ * add ip, pc, #0xNN00000
+ * add ip, ip, #0xNN000
+ * ldr pc, [ip, #0xNNN]!
+ *
+ * So that, effectively, causes the following to happen:
+ *
+ * ip : = pc+0x0NNNNNNN
+ * pc : = *ip
+ *
+ * For thumb the above fragment is preceded by "bx pc, nop" to switch to ARM
+ * mode and the thumb 'bl' must go to PLT-4 - the PLT entry is expanded by
+ * four bytes to accomodate the trampoline code.
+ *
+ * 0x0NNNNNNN is the offset of the GOT entry for this function relative to
+ * the PLT entry for this function (where the code is). So the code in the
+ * PLT causes a branch to whatever is in the GOT, leaving the actual address
+ * of the GOT entry in ip. (Note that the GOT must follow the PLT - the
+ * added value is 28 bit unsigned).
+ *
+ * ip is a pointer to the GOT entry for this function, the first time round
+ * *ip points to this code:
+ *
+ * str lr, [sp, #-4]! @ save lr
+ * ldr lr, [pc, #4] @ lr : = *dat (&GOT_TABLE[0]-.)
+ * add lr, pc, lr @ lr += &dat (so lr == &GOT_TABLE[0])
+ * ldr pc, [lr, #8]! @ pc : = GOT_TABLE[2]
+ *dat: *.long &GOT_TABLE[0] - .
+ *
+ * (this code is actually held in the first entry of the PLT). The code
+ * preserves lr then uses it as a scratch register (this preserves the ip
+ * value calculated above). GOT_TABLE[2] is initialized by INIT_GOT in
+ * dl-sysdep.h to point to _dl_linux_resolve - this function. The first
+ * three entries in the GOT are reserved, then they are followed by the
+ * entries for the PLT entries, in order.
+ *
+ * The linker initialises the following (non-reserved) GOT entries to
+ * the offset of the PLT with an associated relocation so that on load
+ * the entry is relocated to point to the PLT - the above code.
+ *
+ * The net effect of all this is that on the first call to an external (as
+ * yet unresolved) function all seven of the above instructions are
+ * executed in sequence and the program ends up executing _dl_linux_resolve
+ * with the following important values in registers:
+ *
+ * ip - a pointer to the GOT entry for the as yet unresolved function
+ * lr - &GOT_TABLE[2]
+ *
+ * GOT_TABLE[2] has already been initialised to _dl_linux_resolve, and
+ * GOT_TABLE[1] is a pointer to the (elf_resolve*) from INIT_GOT.
+ * _dl_linux_resolve unfrobnicates the ip and lr values to obtain arguments
+ * for a call to _dl_linux_resolver (not the additional 'r' on the end) -
+ * this is in elfinterp.c in this directory. The call takes arguments:
+ *
+ * _dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry)
+ *
+ * And returns the address of the function, it also overwrites the GOT
+ * table entry so that the next time round only the first code fragment will
+ * be executed - it will call the function directly.
+ *
+ * [[Of course, this simply doesn't work on ARM 4T with a thumb target - because
+ * 4T did not do the thumb/arm change on ldr pc! It can be made to work by
+ * changing _dl_linux_resolver to return __%s_from_arm for an STT_TFUNC, but
+ * this hasn't been done, and there is no guarantee that the linker generated
+ * that glue anyway.]]
+ *
+ * _dl_linux_resolve gets the arguments to call the resolver as follows:
+ *
+ * tpnt *GOT_TABLE[1], [lr-4]
+ * reloc-entry &GOT-&GOT_TABLE[3], (ip - lr - 4)/4
+ *
+ * (I.e. 'GOT' means the table entry for this function, the thing for which
+ * ip holds the address.) The reloc-entry is passed as an index, since
+ * since the GOT table has 4 byte entries the code needs to divide this by 4
+ * to get the actual index.
+ *
+ * John Bowler, August 13, 2005 - determined by experiment and examination
+ * of generated ARM code (there was no documentation...)
+ *
+ * This code is all ARM code - not thumb - _dl_linux_resolver may, itself,
+ * be thumb, in which case the linker will insert the appropriate glue. A
+ * call from thumb to the PLT hits the trampoline code described above.
+ * This code (now) builds a proper stack frame.
+ *
+ * The code does *not* set sb (r9,v6) - to do that the basic PLT instructions
+ * would need to save sb and load the new value and that would require
+ * support in the linker since it generates those instructions. (Also note
+ * that linux/uclibc seems to be using r10 - sl - as a PIC base register - see
+ * dl-startup.c).
*/
-#include <features.h>
+#include <sys/syscall.h>
-#define sl r10
-#define fp r11
-#define ip r12
+#include <features.h>
-.text
-.globl _dl_linux_resolve
-.type _dl_linux_resolve,%function
-.align 4;
+ .text
+ .align 4 @ 16 byte boundary and there are 32 bytes below (arm case)
+ #if !defined(__thumb__)
+ .arm
+ .globl _dl_linux_resolve
+ .type _dl_linux_resolve,%function
+ .align 4;
_dl_linux_resolve:
- stmdb sp!, {r0, r1, r2, r3, sl, fp}
- sub r1, ip, lr
- sub r1, r1, #4
- add r1, r1, r1
- ldr r0, [lr, #-4]
- mov r3,r0
+ @ _dl_linux_resolver is a standard subroutine call, therefore it
+ @ preserves everything except r0-r3 (a1-a4), ip and lr. This
+ @ function must branch to the real function, and that expects
+ @ r0-r3 and lr to be as they were before the whole PLT stuff -
+ @ ip can be trashed.
+
+ stmdb sp!, {r0, r1, r2, r3, sl, fp}
+ ldr r0, [lr, #-4] @ r0 : = [lr-4] (GOT_TABLE[1])
+ sub r1, lr, ip @ r1 : = (lr-ip) (a multple of 4)
+ mvn r1, r1, ASR #2 @ r1 : = ~((lr-ip)>>2), since -x = (1+~x)
+ @ ~x = -x-1, therefore ~(r1>>2) = (-((lr-ip)>>2)-1)
+ @ = - ((lr-ip)/4) - 1 = (ip - lr - 4)/4, as required
bl _dl_linux_resolver
mov ip, r0
- ldmia sp!, {r0, r1, r2, r3, sl, fp, lr}
+ ldmia sp!, {r0-r3, lr}
+
#if defined(__USE_BX__)
bx ip
#else
mov pc,ip
#endif
+#else
+ @ In the thumb case _dl_linux_resolver is thumb. If a bl is used
+ @ from arm code the linker will insert a stub call which, with
+ @ binutils 2.16, is not PIC. Since this code is accessed by an
+ @ ldr pc the reasonable fix is to make _dl_linux_resolve thumb too.
+ .thumb
+ .globl _dl_linux_resolve
+ .thumb_func
+ .type _dl_linux_resolve,%function
+ _dl_linux_resolve:
+ @ _dl_linux_resolver is a standard subroutine call, therefore it
+ @ preserves everything except r0-r3 (a1-a4), ip and lr. This
+ @ function must branch to the real function, and that expects
+ @ r0-r3 and lr to be as they were before the whole PLT stuff -
+ @ ip can be trashed.
+ push {r0-r3}
+ mov r1, lr @ &GOT_TABLE[2]
+ sub r0, r1, #4
+ mov r2, ip @ &GOT[n]
+ ldr r0, [r0] @ r0 := GOT_TABLE[1]
+ @ for the function call r1 := n-3
+ sub r1, r2
+ asr r1, r1, #2
+ mvn r1, r1 @ exactly as in the arm code above
+ bl _dl_linux_resolver
+ @ r0 contains the branch address, the return address is above
+ @ the saved r0..r3
+ mov ip, r0
+ ldr r1, [sp, #16]
+ mov lr, r1
+ pop {r0-r3}
+ add sp, #4
+ bx ip
+
+#endif
.size _dl_linux_resolve, .-_dl_linux_resolve
diff --git a/ldso/ldso/dl-hash.c b/ldso/ldso/dl-hash.c
index 4fd7ba0b7..26022ff79 100644
--- a/ldso/ldso/dl-hash.c
+++ b/ldso/ldso/dl-hash.c
@@ -123,7 +123,6 @@ struct elf_resolve *_dl_add_elf_hash_table(const char *libname,
return tpnt;
}
-
/*
* This function resolves externals, and this is either called when we process
* relocations or when we call an entry in the PLT table for the first time.
@@ -167,30 +166,53 @@ char *_dl_find_hash(const char *name, struct dyn_elf *rpnt, struct elf_resolve *
strtab = (char *) (tpnt->dynamic_info[DT_STRTAB]);
for (si = tpnt->elf_buckets[hn]; si != STN_UNDEF; si = tpnt->chains[si]) {
+ char *result;
sym = &symtab[si];
- if (type_class & (sym->st_shndx == SHN_UNDEF))
- continue;
- if (_dl_strcmp(strtab + sym->st_name, name) != 0)
- continue;
- if (sym->st_value == 0)
- continue;
- if (ELF_ST_TYPE(sym->st_info) > STT_FUNC)
- continue;
-
- switch (ELF_ST_BIND(sym->st_info)) {
- case STB_WEAK:
+ if (sym->st_shndx == SHN_UNDEF)
+ continue;
+ if (ELF_ST_TYPE(sym->st_info) > STT_FUNC
+#if defined(__arm__) || defined(__thumb__)
+ /* On ARM (only) STT_ARM_TFUNC is a function
+ * and has a value >STT_FUNC, so this must
+ * be checked specially.
+ */
+ && ELF_ST_TYPE(sym->st_info) != STT_ARM_TFUNC
+#endif
+ )
+ continue;
+ if (_dl_strcmp(strtab + sym->st_name, name) != 0)
+ continue;
#if 0
-/* Perhaps we should support old style weak symbol handling
- * per what glibc does when you export LD_DYNAMIC_WEAK */
- if (!weak_result)
- weak_result = (char *) DL_RELOC_ADDR(tpnt->loadaddr, sym->st_value);
- break;
+ /* I don't know how to write this test - need to test shndx
+ * to see if it is the PLT for this module.
+ */
+ if ((type_class & ELF_RTYPE_CLASS_PLT) && some test)
+ continue;
+#endif
+
+#if defined(__arm__) || defined(__thumb__)
+ /* On ARM the caller needs to know that STT_ARM_TFUNC
+ * is a thumb function call, this is now indicated by
+ * setting the low bit of the value (and newer binutils
+ * will do this and record STT_FUNC).
+ */
+ result = (char*)tpnt->loadaddr + (sym->st_value |
+ (ELF_ST_TYPE(sym->st_info) == STT_ARM_TFUNC));
+#else
+ result = (char*)tpnt->loadaddr + sym->st_value;
#endif
- case STB_GLOBAL:
- return (char*) DL_RELOC_ADDR(tpnt->loadaddr, sym->st_value);
+ switch (ELF_ST_BIND(sym->st_info)) {
+ case STB_WEAK:
+ /* Record for use later if we can't find a global. */
+ if (!weak_result)
+ weak_result = result;
+ break;
+
+ case STB_GLOBAL:
+ return result;
default: /* Local symbols not handled here */
- break;
+ break;
}
}
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 09:22:07 +0000