diff options
Diffstat (limited to 'extra')
| -rw-r--r-- | extra/Configs/Config.mips | 26 | ||||
| -rw-r--r-- | extra/Configs/Config.mipsel | 191 |
2 files changed, 205 insertions, 12 deletions
diff --git a/extra/Configs/Config.mips b/extra/Configs/Config.mips index 0e044e4da..9dd618610 100644 --- a/extra/Configs/Config.mips +++ b/extra/Configs/Config.mips @@ -27,10 +27,13 @@ NATIVE_CC = gcc +# Specify the target +TARGET_ARCH=mips + # If you are running a cross compiler, you may want to set this # to something more interesting... Target architecture is determined # by asking this compiler what arch it compiles stuff for. -CROSS = mipsel-linux- +CROSS = mips-linux- CC = $(CROSS)gcc AR = $(CROSS)ar LD = $(CROSS)ld @@ -42,7 +45,7 @@ STRIPTOOL = $(CROSS)strip DODEBUG = false # Compiler warnings you want to see -WARNINGS=-Wall +WARNINGS = -Wall # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary @@ -51,7 +54,7 @@ WARNINGS=-Wall # can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, # but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't # work at all. You have been warned. -KERNEL_SOURCE=/usr/src/linux +KERNEL_SOURCE = /usr/src/linux # Set this to `false' if your CPU doesn't have a memory management unit (MMU). # Set it to `true' otherwise. @@ -116,7 +119,7 @@ DOLFS = false # If you don't use regular expressions, turn this off and save space. # Of course, if you only staticly link, leave this on, since it will # only be included in your apps if you use regular expressions. -INCLUDE_REGEX=true +INCLUDE_REGEX = true # If you want to include RPC support, enable this. RPC is almost never used # for anything except NFS support, so unless you plan to use NFS, leave this @@ -138,22 +141,21 @@ UNIX98PTY_ONLY = true # This is true by default. ASSUME_DEVPTS = true - # If you want to compile the library as PIC code, turn this on. # This is automagically enabled when HAVE_SHARED is true -DOPIC = false +DOPIC = true # Enable support for shared libraries? If this is false, you can # ignore all the rest of the options in this file... -HAVE_SHARED = false +HAVE_SHARED = true # uClibc has a native shared library loader for some architectures. -BUILD_UCLIBC_LDSO=false +BUILD_UCLIBC_LDSO = true # If you are using shared libraries, but do not want/have a native # uClibc shared library loader, please specify the name of your # system's shared library loader here... -#SYSTEM_LDSO=/lib/ld-linux.so.2 +#SYSTEM_LDSO = /lib/ld-linux.so.2 # When using shared libraries, this path is the location where the # shared library will be invoked. This value will be compiled into @@ -162,7 +164,7 @@ BUILD_UCLIBC_LDSO=false # BIG FAT WARNING: # If you do not have a shared library loader with the correct name # sitting in the directory this points to, your binaries will not run. -SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib +SHARED_LIB_LOADER_PATH = $(DEVEL_PREFIX)/lib # DEVEL_PREFIX is the directory into which the uClibc development # environment will be installed. The result will look something @@ -184,6 +186,6 @@ DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary -# directory, the define PREFIX during the install step, +# directory, then define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. -#PREFIX = $(TOPDIR)/_install +PREFIX = $(TOPDIR)/_install diff --git a/extra/Configs/Config.mipsel b/extra/Configs/Config.mipsel new file mode 100644 index 000000000..7dcb77c3a --- /dev/null +++ b/extra/Configs/Config.mipsel @@ -0,0 +1,191 @@ +# Library Configuration rules for uClibc +# +# This file contains rules which are shared between multiple Makefiles. All +# normal configuration options live in the file named "Config". You probably +# should not mess with this file unless you know what you are doing... +# +# Copyright (C) 2000 by Lineo, inc. +# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org> +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of the GNU Library General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) any +# later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more +# details. +# +# You should have received a copy of the GNU Library General Public License +# along with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# Derived in part from the Linux-8086 C library, the GNU C Library, and several +# other sundry sources. Files within this library are copyright by their +# respective copyright holders. + +NATIVE_CC = gcc + +# Specify the target +TARGET_ARCH=mipsel + +# If you are running a cross compiler, you may want to set this +# to something more interesting... Target architecture is determined +# by asking this compiler what arch it compiles stuff for. +CROSS = mipsel-linux- +CC = $(CROSS)gcc +AR = $(CROSS)ar +LD = $(CROSS)ld +STRIPTOOL = $(CROSS)strip +#STRIPTOOL = /bin/true + +# Set the following to `true' to make a debuggable build, and `false' for +# production builds. +DODEBUG = false + +# Compiler warnings you want to see +WARNINGS = -Wall + +# Note that the kernel source you use to compile with should be the same as the +# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary +# compatibility across kernel versions. So don't expect, for example, uClibc +# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x +# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, +# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't +# work at all. You have been warned. +KERNEL_SOURCE = /usr/src/linux + +# Set this to `false' if your CPU doesn't have a memory management unit (MMU). +# Set it to `true' otherwise. +HAS_MMU = true + +# Set this to `false' if you don't have/need basic floating point support +# support in libc (strtod, printf, scanf). Set it to `true' otherwise. +# If this is not true, then libm will not be built. +HAS_FLOATING_POINT = true + +# Set to `true' if you want the math library to contain the full set +# of C99 math library features. Costs an extra 35k or so on x86. +DO_C99_MATH = false + +# Set this to `false' if you don't have/need "(unsigned) long long int" support. +# Set it to `true' otherwise. +# Affects *printf and *scanf functions. +# Also omits strto(u)ll, and (u)lltostr from the library if `false'. +HAS_LONG_LONG = true + +# Set this to 'false if you don't need shadow password support. +HAS_SHADOW = false + +# Set this to `false' if you don't have/need locale support; `true' otherwise. +# Note: Currently only affects the ctype functions. You must also generate +# a locale file for anything but the C locale. See directory extra/locale for +# a utility to do so. Also see the following option. +HAS_LOCALE = false + +# Set this to the path of your uClibc locale file directory. +# Warning! This must be different than the glibc locale directory to avoid +# name conflicts, as the locale files are entirely different in format! +LOCALE_DIR = "/usr/share/uClibc-locale/" + +# This specifies which malloc implementation is used. +# "malloc-simple" is very, very small, but is also very, very dumb +# and does not try to make good use of memory or clean up after itself. +# +# "malloc" on the other hand is a bit bigger, but is pretty smart thereby +# minimizing memory wastage and reusing already allocated memory. This +# can be lots faster and safer IMHO. +# +# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. +# It is actually smaller than "malloc", at least on i386. Right now, it +# only works on i386 (and maybe m68k) because it needs sbrk. +#MALLOC = malloc-simple +#MALLOC = malloc +MALLOC = malloc-930716 + +# If you want to collect common syscall code into one function, set to this to +# `true'. Set it to false otherwise. +# On i386 this saves about than 2.8k over all syscalls. +# The idea came from the implementation in dietlibc. +# At present, only affects i386. +UNIFIED_SYSCALL = false + +# If you want large file support (greater then 2 GiB) turn this on. +# Do not enable this unless your kernel provides large file support. +DOLFS = false + +# Posix regular expression code is really big -- 27k all by itself. +# If you don't use regular expressions, turn this off and save space. +# Of course, if you only staticly link, leave this on, since it will +# only be included in your apps if you use regular expressions. +INCLUDE_REGEX = true + +# If you want to include RPC support, enable this. RPC is almost never used +# for anything except NFS support, so unless you plan to use NFS, leave this +# disabled. This is off by default. +INCLUDE_RPC = false + +# If you want to include support for the next version of the Internet +# Protocol: IP version 6, enable this. This is off by default. +INCLUDE_IPV6 = false + +# If you want to support only Unix 98 PTYs enable this. Some older +# applications may need this disabled. For most current programs, +# you can generally leave this true. +UNIX98PTY_ONLY = true + +# Enable this if /dev/pts is on a devpts or devfs file system. Both +# these filesystems automatically manage permissions on the /dev/pts +# devices. You may need to mount this fs on /dev/pts for this to work. +# This is true by default. +ASSUME_DEVPTS = true + +# If you want to compile the library as PIC code, turn this on. +# This is automagically enabled when HAVE_SHARED is true +DOPIC = true + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = true + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO = true + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO = /lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. +# +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +SHARED_LIB_LOADER_PATH = $(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by +# the 'make install' target, and is not compiled into anything. This +# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will +# want to set this to "/usr" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)/usr + +# If you want 'make install' to install everything under a temporary +# directory, then define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +PREFIX = $(TOPDIR)/_install |