diff options
Diffstat (limited to 'extra/Configs')
| -rw-r--r-- | extra/Configs/Config.arm | 4 | ||||
| -rw-r--r-- | extra/Configs/Config.cris | 6 | ||||
| -rw-r--r-- | extra/Configs/Config.in | 171 |
3 files changed, 104 insertions, 77 deletions
diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm index 26e1f3da4..2b91a34d3 100644 --- a/extra/Configs/Config.arm +++ b/extra/Configs/Config.arm @@ -48,8 +48,8 @@ choice optimizing purposes. To build a library that will run on all ARMCPU types (albeit not optimally fast), you can specify "Generic Arm" here. If you pick anything other than "Generic Arm", there is no guarantee - that uClibc will even run on anything other than the selected processor - type. + that uClibc will even run on anything other than the selected + processor type. Here are the settings recommended for greatest speed: - "Generic Arm" select this if your compiler is already setup to diff --git a/extra/Configs/Config.cris b/extra/Configs/Config.cris index 18c75fb58..b3811d1e9 100644 --- a/extra/Configs/Config.cris +++ b/extra/Configs/Config.cris @@ -19,10 +19,10 @@ choice prompt "Target Architecture Type" default CONFIG_CRIS help - This is the architecture type of your CPU. This information is used for - optimizing purposes. + This is the architecture type of your CPU. This information + is used for optimizing purposes. - These are the possible settings: + Possible settings: - CRIS Generic support for Axis' CRIS architecture. - CRISv32 Support for Axis' CRISv32 architecture. diff --git a/extra/Configs/Config.in b/extra/Configs/Config.in index 3dc60fb66..b54c5ab43 100644 --- a/extra/Configs/Config.in +++ b/extra/Configs/Config.in @@ -239,14 +239,14 @@ config FORCE_SHAREABLE_TEXT_SEGMENTS default n help If you answer Y here, the uClibc native shared library loader will - only load shared libraries, which do not need to modify any non-writable - segments. These libraries haven't set the DT_TEXTREL tag in the dynamic - section (==> objdump). All your libraries must be compiled with - -fPIC or -fpic, and all assembler function must be written as position - independent code (PIC). + only load shared libraries, which do not need to modify any + non-writable segments. These libraries haven't set the DT_TEXTREL + tag in the dynamic section (==> objdump). + All your libraries must be compiled with -fPIC or -fpic, and all + assembler function must be written as position independent code (PIC). Enabling this option will make uClibc's shared library loader a - little bit smaller and guarantee that no memory will be wasted by badly - coded shared libraries. + little bit smaller and guarantee that no memory will be wasted by + badly coded shared libraries. config LDSO_LDD_SUPPORT bool "Native 'ldd' support" @@ -257,7 +257,8 @@ config LDSO_LDD_SUPPORT which executes the shared library loader to resolve all dependencies and then provide a list of shared libraries that are required for an application to function. Disabling this option will makes uClibc's - shared library loader a little bit smaller. Most people will answer Y. + shared library loader a little bit smaller. + Most people will answer Y. config LDSO_CACHE_SUPPORT bool "Enable library loader cache (ld.so.conf)" @@ -345,7 +346,8 @@ config LDSO_GNU_HASH_SUPPORT Newest binutils support a new hash style named GNU-hash. The dynamic linker will use the new GNU-hash section (.gnu.hash) for symbol lookup if present into the ELF binaries, otherwise it will use the old SysV - hash style (.hash). This ensures that it is completely backward compatible. + hash style (.hash). This ensures that it is completely backward + compatible. Further, being the hash table implementation self-contained into each executable and shared libraries, objects with mixed hash style can peacefully coexist in the same process. @@ -427,9 +429,10 @@ choice config MALLOC bool "malloc" help - "malloc" use mmap for all allocations and so works very well on MMU-less - systems that do not support the brk() system call. It is pretty smart - about reusing already allocated memory, and minimizing memory wastage. + "malloc" use mmap for all allocations and so works very well on + MMU-less systems that do not support the brk() system call. It is + pretty smart about reusing already allocated memory, and minimizing + memory wastage. This is the default for uClinux MMU-less systems. config MALLOC_SIMPLE @@ -495,8 +498,8 @@ config COMPAT_ATEXIT bool "Old (visible) atexit Support" default n help - Enable this option if you want to update from 0.9.28 to svn/0.9.29, else - you will be missing atexit() until you rebuild all apps. + Enable this option if you want to update from 0.9.28 to svn/0.9.29, + else you will be missing atexit() until you rebuild all apps. config UCLIBC_SUSV3_LEGACY bool "Enable SuSv3 LEGACY functions" @@ -658,7 +661,7 @@ config UCLIBC_HAS_TZ_FILE file consists of a single line (newline required) of text describing the timezone in the format specified for the TZ environment variable. - Simply doing 'echo CST6CDT > /etc/TZ' is enough to create a valid file. + Doing 'echo CST6CDT > /etc/TZ' is enough to create a valid file. See http://www.opengroup.org/onlinepubs/007904975/basedefs/xbd_chap08.html for details on valid settings of 'TZ'. @@ -671,10 +674,10 @@ config UCLIBC_HAS_TZ_FILE_READ_MANY default y help Answer Y to enable repeated reading of the '/etc/TZ' file even after - a valid value has been read. This incurs the overhead of an open/read/close - for each tzset() call (explicit or implied). However, setting this - will allows applications to update their timezone information if the contents - of the file change. + a valid value has been read. This incurs the overhead of an + open/read/close for each tzset() call (explicit or implied). However, + setting this will allow applications to update their timezone + information if the contents of the file change. Most people will answer Y. @@ -997,9 +1000,10 @@ config UCLIBC_HAS_RPC depends on UCLIBC_HAS_IPV4 || UCLIBC_HAS_IPV6 help If you want to include RPC support, enable this. RPC is rarely used - for anything except for the NFS filesystem. Unless you plan to use NFS, - you can probably leave this set to N and save some space. If you need - to use NFS then you should answer Y. + for anything except for the NFS filesystem. Unless you plan to use + NFS, you can probably leave this set to N and save some space. + + If you need to use NFS then you should answer Y. config UCLIBC_HAS_FULL_RPC bool "Full RPC support" @@ -1113,7 +1117,8 @@ choice depends on UCLIBC_HAS_CTYPE_TABLES default UCLIBC_HAS_CTYPE_UNSAFE help - Please select the invalid arg behavior you want for the 'ctype' functions. + Please select the invalid arg behavior you want for the 'ctype' + functions. The 'ctype' functions are now implemented using table lookups, with the arg being the index. This can result in incorrect memory accesses @@ -1199,8 +1204,10 @@ config UCLIBC_HAS_XLOCALE default n help Answer Y to enable extended locale support similar to that provided - by glibc. This is primarily intended to support libstd++ functionality. - However, it also allows thread-specific locale selection via uselocale(). + by glibc. This is primarily intended to support libstd++ + functionality. + However, it also allows thread-specific locale selection via + uselocale(). Most people will answer N. @@ -1223,9 +1230,10 @@ config UCLIBC_HAS_GLIBC_DIGIT_GROUPING depends on UCLIBC_HAS_FLOATS default n help - Answer Y to enable support for glibc's \"'\" flag for allowing locale-specific - digit grouping in base 10 integer conversions and appropriate floating point - conversions in the *printf() and *scanf() functions. + Answer Y to enable support for glibc's \"'\" flag for allowing + locale-specific digit grouping in base 10 integer conversions and + appropriate floating point conversions in the *printf() and *scanf() + functions. Most people will answer N. @@ -1234,10 +1242,11 @@ config UCLIBC_HAS_SCANF_LENIENT_DIGIT_GROUPING depends on UCLIBC_HAS_GLIBC_DIGIT_GROUPING default y help - Answer Y to make digit grouping optional when the \"'\" flag is specified. + Answer Y to make digit grouping optional when the \"'\" flag is + specified. This is the standard glibc behavior. If the initial string of digits - exceeds the maximum group number, the input will be treated as a normal - non-grouped number. + exceeds the maximum group number, the input will be treated as a + normal non-grouped number. Most people will answer N. @@ -1249,8 +1258,8 @@ config UCLIBC_HAS_GLIBC_CUSTOM_PRINTF Answer Y to support glibc's register_printf_function() to allow an application to add its own printf conversion specifiers. - NOTE: This implementation limits the number or registered specifiers to 10. - NOTE: This implementation requires new conversion specifiers to be ASCII + NOTE: Limits the number or registered specifiers to 10. + NOTE: Requires new conversion specifiers to be ASCII characters (0-0x7f). This is to avoid problems with processing format strings in locales with different multibyte conversions. @@ -1261,9 +1270,10 @@ config USE_OLD_VFPRINTF depends on !UCLIBC_HAS_WCHAR default n help - Set to true to use the old vfprintf instead of the new. This is roughly - C89 compliant with some extensions, and is much smaller. However, it does - not support wide chars, positional args, or glibc custom printf specifiers. + Set to true to use the old vfprintf instead of the new. This is + roughly C89 compliant with some extensions, and is much smaller. + However, it does not support wide chars, positional args, or glibc + custom printf specifiers. Most people will answer N. @@ -1272,12 +1282,15 @@ config UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS depends on !USE_OLD_VFPRINTF default 9 help - Set the maximum number of positional args supported by the printf/scanf - functions. The Single Unix Specification Version 3 requires a minimum - value of 9. Setting this to a value lower than 9 will disable positional - arg support and cause the NL_ARGMAX macro in limits.h to be #undef'd. - WARNING! The workspace to support positional args is currently allocated - on the stack. You probably don't want to set this to too high a value. + Set the maximum number of positional args supported by the + printf/scanf functions. The Single Unix Specification Version 3 + requires a minimum value of 9. Setting this to a value lower than + 9 will disable positional arg support and cause the NL_ARGMAX macro + in limits.h to be #undef'd. + + WARNING! The workspace to support positional args is currently + allocated on the stack. You probably don't want to set + this to too high a value. Most people will answer 9. @@ -1364,9 +1377,10 @@ config UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT bool "Attempt to shutdown stdio subsystem when abort() is called." default n help - ANSI/ISO C99 requires abort() to be asyn-signal-safe. So there was a behavioral - change made in SUSv3. Previously, abort() was required to have the affect of - fclose() on all open streams. The wording has been changed to "may" from "shall". + ANSI/ISO C99 requires abort() to be asyn-signal-safe. So there was + a behavioral change made in SUSv3. Previously, abort() was required + to have the affect of fclose() on all open streams. The wording has + been changed to "may" from "shall". Most people will answer N. @@ -1393,15 +1407,17 @@ config UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION default y help Answer Y to enable the stdio subsystem to automaticly transition - between reading and writing. This relaxes the ANSI/ISO C99 requirement: - - When a file is opened with update mode ('+' as the second or third character - in the list of mode argument values), both input and output may be performed - on the associated stream. However, output shall not be directly followed by - input without an intervening call to the fflush function or to a file - positioning function (fseek, fsetpos, or rewind), and input shall not be - directly followed by output without an intervening call to a file positioning - function, unless the input operation encounters endoffile. + between reading and writing. This relaxes the ANSI/ISO C99 + requirement: + + When a file is opened with update mode ('+' as the second or third + character in the list of mode argument values), both input and output + may be performed on the associated stream. However, output shall not + be directly followed by input without an intervening call to the + fflush function or to a file positioning function (fseek, fsetpos, + or rewind), and input shall not be directly followed by output without + an intervening call to a file positioning function, unless the input + operation encounters endoffile. Most people will answer Y. @@ -1443,7 +1459,8 @@ config UCLIBC_HAS_PRINTF_M_SPEC help Answer Y to support a glibc extension to interpret '%m' in printf format strings as an instruction to output the error message string - (as generated by strerror) corresponding to the current value of 'errno'. + (as generated by strerror) corresponding to the current value of + 'errno'. Most people will answer N. @@ -1467,7 +1484,8 @@ config UCLIBC_HAS_SYS_ERRLIST arch where it adds over 4K. WARNING! In the future, support for sys_errlist[] may be unavailable - in at least some configurations. In fact, it may be removed altogether. + in at least some configurations. In fact, it may be removed + altogether. Most people will answer N. @@ -1491,7 +1509,8 @@ config UCLIBC_HAS_SYS_SIGLIST Answer Y if you want to support sys_siglist[]. WARNING! In the future, support for sys_siglist[] may be unavailable - in at least some configurations. In fact, it may be removed altogether. + in at least some configurations. In fact, it may be removed + altogether. Most people will answer N. @@ -1627,12 +1646,12 @@ config UCLIBC_HAS_GNU_GLOB depends on UCLIBC_HAS_GLOB default n help - The gnu glob interface is somewhat larger (weighing in at about 4,2k) than - it's SuSv3 counterpart (and is out of date). It is an old copy from glibc and - does not support all the GNU specific options. + The gnu glob interface is somewhat larger (weighing in at about 4,2k) + than it's SuSv3 counterpart (and is out of date). It is an old copy + from glibc and does not support all the GNU specific options. - Answer Y if you want to include full gnu glob() instead of the smaller SUSv3 - compatible glob(). + Answer Y if you want to include full gnu glob() instead of the smaller + SUSv3 compatible glob(). Most people will answer N. @@ -1706,12 +1725,16 @@ config UCLIBC_BUILD_PIE select FORCE_SHAREABLE_TEXT_SEGMENTS default n help - If you answer Y here, ldd and iconv are built as ET_DYN/PIE executables. + If you answer Y here, ldd and iconv are built as ET_DYN/PIE + executables. + It requires gcc-3.4 and binutils-2.15 (for arm 2.16) or later. More about ET_DYN/PIE binaries on <http://pax.grsecurity.net/> . - WARNING: This option also enables FORCE_SHAREABLE_TEXT_SEGMENTS, so all - libraries have to be built with -fPIC or -fpic, and all assembler - functions must be written as position independent code (PIC). + + WARNING: This option also enables FORCE_SHAREABLE_TEXT_SEGMENTS, so + all libraries have to be built with -fPIC or -fpic, and all + assembler functions must be written as position independent + code (PIC). config UCLIBC_HAS_ARC4RANDOM bool "Include the arc4random() function" @@ -1947,9 +1970,11 @@ config SUPPORT_LD_DEBUG detail provide more information for some options move display copy processing symbols display symbol table processing - reloc display relocation processing; detail shows the relocation patch + reloc display relocation processing; detail shows the + relocation patch nofixups never fixes up jump relocations - bindings displays the resolve processing (function calls); detail shows the relocation patch + bindings displays the resolve processing (function calls); + detail shows the relocation patch all Enable everything! The additional environment variable: @@ -1988,12 +2013,14 @@ config UCLIBC_MALLOC_DEBUGGING Malloc debugging output may then be enabled at runtime using the MALLOC_DEBUG environment variable. - The value of MALLOC_DEBUG should be an integer, which is interpreted as - a bitmask with the following bits: + The value of MALLOC_DEBUG should be an integer, which is interpreted + as a bitmask with the following bits: 1 - do extra consistency checking - 2 - output messages for malloc/free calls and OS allocation calls + 2 - output messages for malloc/free calls and OS + allocation calls 4 - output messages for the `MMB' layer - 8 - output messages for internal malloc heap manipulation calls + 8 - output messages for internal malloc heap manipulation + calls Because this increases the size of malloc appreciably (due to strings etc), you should say N unless you need to debug a malloc problem. |